Re: [PATCH] usb: phy: jz4770: Add a missing '\n' in a log message

From: Paul Cercueil
Date: Sat Apr 11 2020 - 09:14:08 EST


Hi Christophe,

Le sam. 11 avril 2020 à 8:38, Christophe JAILLET <christophe.jaillet@xxxxxxxxxx> a écrit :
Message logged by 'dev_xxx()' or 'pr_xxx()' should end with a '\n'.

Is that so?

From what I could see these macros add the \n themselves if needed. So the \n were omitted on purpose.

-Paul

Fixes: 541368b46b82 ("usb: phy: Add driver for the Ingenic JZ4770 USB transceiver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
---
drivers/usb/phy/phy-jz4770.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/phy/phy-jz4770.c b/drivers/usb/phy/phy-jz4770.c
index 3ea1f5b9bcf8..8f62dc2a90ff 100644
--- a/drivers/usb/phy/phy-jz4770.c
+++ b/drivers/usb/phy/phy-jz4770.c
@@ -125,13 +125,13 @@ static int jz4770_phy_init(struct usb_phy *phy)

err = regulator_enable(priv->vcc_supply);
if (err) {
- dev_err(priv->dev, "Unable to enable VCC: %d", err);
+ dev_err(priv->dev, "Unable to enable VCC: %d\n", err);
return err;
}

err = clk_prepare_enable(priv->clk);
if (err) {
- dev_err(priv->dev, "Unable to start clock: %d", err);
+ dev_err(priv->dev, "Unable to start clock: %d\n", err);
return err;
}

@@ -191,7 +191,7 @@ static int jz4770_phy_probe(struct platform_device *pdev)

priv->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(priv->base)) {
- dev_err(dev, "Failed to map registers");
+ dev_err(dev, "Failed to map registers\n");
return PTR_ERR(priv->base);
}

@@ -199,7 +199,7 @@ static int jz4770_phy_probe(struct platform_device *pdev)
if (IS_ERR(priv->clk)) {
err = PTR_ERR(priv->clk);
if (err != -EPROBE_DEFER)
- dev_err(dev, "Failed to get clock");
+ dev_err(dev, "Failed to get clock\n");
return err;
}

@@ -207,14 +207,14 @@ static int jz4770_phy_probe(struct platform_device *pdev)
if (IS_ERR(priv->vcc_supply)) {
err = PTR_ERR(priv->vcc_supply);
if (err != -EPROBE_DEFER)
- dev_err(dev, "failed to get regulator");
+ dev_err(dev, "Failed to get regulator\n");
return err;
}

err = usb_add_phy(&priv->phy, USB_PHY_TYPE_USB2);
if (err) {
if (err != -EPROBE_DEFER)
- dev_err(dev, "Unable to register PHY");
+ dev_err(dev, "Unable to register PHY\n");
return err;
}

--
2.20.1