[PATCH 2/2] mmc: sdhci: use FIELD_GET/PREP for capabilities bit masks

From: Masahiro Yamada
Date: Wed Apr 08 2020 - 03:22:28 EST


Use FIELD_GET and FIELD_PREP to get access to the register fields.
Delete the shift macros. I used GENMASK() for touched macros.

Signed-off-by: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
---

drivers/mmc/host/sdhci-esdhc-imx.c | 4 +++-
drivers/mmc/host/sdhci-of-at91.c | 5 +++--
drivers/mmc/host/sdhci-pci-core.c | 8 ++------
drivers/mmc/host/sdhci.c | 19 +++++++------------
drivers/mmc/host/sdhci.h | 17 ++++++-----------
5 files changed, 21 insertions(+), 32 deletions(-)

diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 5ec8e4bf1ac7..38cd83118082 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -8,6 +8,7 @@
* Author: Wolfram Sang <kernel@xxxxxxxxxxxxxx>
*/

+#include <linux/bitfield.h>
#include <linux/io.h>
#include <linux/iopoll.h>
#include <linux/delay.h>
@@ -399,7 +400,8 @@ static u32 esdhc_readl_le(struct sdhci_host *host, int reg)
val = SDHCI_SUPPORT_DDR50 | SDHCI_SUPPORT_SDR104
| SDHCI_SUPPORT_SDR50
| SDHCI_USE_SDR50_TUNING
- | (SDHCI_TUNING_MODE_3 << SDHCI_RETUNING_MODE_SHIFT);
+ | FIELD_PREP(SDHCI_RETUNING_MODE_MASK,
+ SDHCI_TUNING_MODE_3);

if (imx_data->socdata->flags & ESDHC_FLAG_HS400)
val |= SDHCI_SUPPORT_HS400;
diff --git a/drivers/mmc/host/sdhci-of-at91.c b/drivers/mmc/host/sdhci-of-at91.c
index c79bff5e2280..25f4e0f4f53b 100644
--- a/drivers/mmc/host/sdhci-of-at91.c
+++ b/drivers/mmc/host/sdhci-of-at91.c
@@ -6,6 +6,7 @@
* 2015 Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
*/

+#include <linux/bitfield.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/err.h>
@@ -179,9 +180,9 @@ static int sdhci_at91_set_clks_presets(struct device *dev)
clk_mul = gck_rate / clk_base_rate - 1;

caps0 &= ~SDHCI_CLOCK_V3_BASE_MASK;
- caps0 |= (clk_base << SDHCI_CLOCK_BASE_SHIFT) & SDHCI_CLOCK_V3_BASE_MASK;
+ caps0 |= FIELD_PREP(SDHCI_CLOCK_V3_BASE_MASK, clk_base);
caps1 &= ~SDHCI_CLOCK_MUL_MASK;
- caps1 |= (clk_mul << SDHCI_CLOCK_MUL_SHIFT) & SDHCI_CLOCK_MUL_MASK;
+ caps1 |= FIELD_PREP(SDHCI_CLOCK_MUL_MASK, clk_mul);
/* Set capabilities in r/w mode. */
writel(SDMMC_CACR_KEY | SDMMC_CACR_CAPWREN, host->ioaddr + SDMMC_CACR);
writel(caps0, host->ioaddr + SDHCI_CAPABILITIES);
diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c
index 525de2454a4d..a98c9476bfc8 100644
--- a/drivers/mmc/host/sdhci-pci-core.c
+++ b/drivers/mmc/host/sdhci-pci-core.c
@@ -249,12 +249,8 @@ static int ricoh_probe(struct sdhci_pci_chip *chip)
static int ricoh_mmc_probe_slot(struct sdhci_pci_slot *slot)
{
slot->host->caps =
- ((0x21 << SDHCI_TIMEOUT_CLK_SHIFT)
- & SDHCI_TIMEOUT_CLK_MASK) |
-
- ((0x21 << SDHCI_CLOCK_BASE_SHIFT)
- & SDHCI_CLOCK_BASE_MASK) |
-
+ FIELD_PREP(SDHCI_TIMEOUT_CLK_MASK, 0x21) |
+ FIELD_PREP(SDHCI_CLOCK_BASE_MASK, 0x21) |
SDHCI_TIMEOUT_CLK_UNIT |
SDHCI_CAN_VDD_330 |
SDHCI_CAN_DO_HISPD |
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 3f716466fcfd..344a7e0e33fe 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -4117,11 +4117,9 @@ int sdhci_setup_host(struct sdhci_host *host)
}

if (host->version >= SDHCI_SPEC_300)
- host->max_clk = (host->caps & SDHCI_CLOCK_V3_BASE_MASK)
- >> SDHCI_CLOCK_BASE_SHIFT;
+ host->max_clk = FIELD_GET(SDHCI_CLOCK_V3_BASE_MASK, host->caps);
else
- host->max_clk = (host->caps & SDHCI_CLOCK_BASE_MASK)
- >> SDHCI_CLOCK_BASE_SHIFT;
+ host->max_clk = FIELD_GET(SDHCI_CLOCK_BASE_MASK, host->caps);

host->max_clk *= 1000000;
if (host->max_clk == 0 || host->quirks &
@@ -4139,8 +4137,7 @@ int sdhci_setup_host(struct sdhci_host *host)
* In case of Host Controller v3.00, find out whether clock
* multiplier is supported.
*/
- host->clk_mul = (host->caps1 & SDHCI_CLOCK_MUL_MASK) >>
- SDHCI_CLOCK_MUL_SHIFT;
+ host->clk_mul = FIELD_GET(SDHCI_CLOCK_MUL_MASK, host->caps1);

/*
* In case the value in Clock Multiplier is 0, then programmable
@@ -4173,8 +4170,7 @@ int sdhci_setup_host(struct sdhci_host *host)
mmc->f_max = max_clk;

if (!(host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)) {
- host->timeout_clk = (host->caps & SDHCI_TIMEOUT_CLK_MASK) >>
- SDHCI_TIMEOUT_CLK_SHIFT;
+ host->timeout_clk = FIELD_GET(SDHCI_TIMEOUT_CLK_MASK, host->caps);

if (host->caps & SDHCI_TIMEOUT_CLK_UNIT)
host->timeout_clk *= 1000;
@@ -4326,8 +4322,8 @@ int sdhci_setup_host(struct sdhci_host *host)
mmc->caps |= MMC_CAP_DRIVER_TYPE_D;

/* Initial value for re-tuning timer count */
- host->tuning_count = (host->caps1 & SDHCI_RETUNING_TIMER_COUNT_MASK) >>
- SDHCI_RETUNING_TIMER_COUNT_SHIFT;
+ host->tuning_count = FIELD_GET(SDHCI_RETUNING_TIMER_COUNT_MASK,
+ host->caps1);

/*
* In case Re-tuning Timer is not disabled, the actual value of
@@ -4337,8 +4333,7 @@ int sdhci_setup_host(struct sdhci_host *host)
host->tuning_count = 1 << (host->tuning_count - 1);

/* Re-tuning mode supported by the Host Controller */
- host->tuning_mode = (host->caps1 & SDHCI_RETUNING_MODE_MASK) >>
- SDHCI_RETUNING_MODE_SHIFT;
+ host->tuning_mode = FIELD_GET(SDHCI_RETUNING_MODE_MASK, host->caps1);

ocr_avail = 0;

diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index b786b68e0302..d7f1441b0fc3 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -200,12 +200,10 @@
#define SDHCI_CTRL_PRESET_VAL_ENABLE 0x8000

#define SDHCI_CAPABILITIES 0x40
-#define SDHCI_TIMEOUT_CLK_MASK 0x0000003F
-#define SDHCI_TIMEOUT_CLK_SHIFT 0
+#define SDHCI_TIMEOUT_CLK_MASK GENMASK(5, 0)
#define SDHCI_TIMEOUT_CLK_UNIT 0x00000080
-#define SDHCI_CLOCK_BASE_MASK 0x00003F00
-#define SDHCI_CLOCK_V3_BASE_MASK 0x0000FF00
-#define SDHCI_CLOCK_BASE_SHIFT 8
+#define SDHCI_CLOCK_BASE_MASK GENMASK(13, 8)
+#define SDHCI_CLOCK_V3_BASE_MASK GENMASK(15, 8)
#define SDHCI_MAX_BLOCK_MASK 0x00030000
#define SDHCI_MAX_BLOCK_SHIFT 16
#define SDHCI_CAN_DO_8BIT 0x00040000
@@ -227,13 +225,10 @@
#define SDHCI_DRIVER_TYPE_A 0x00000010
#define SDHCI_DRIVER_TYPE_C 0x00000020
#define SDHCI_DRIVER_TYPE_D 0x00000040
-#define SDHCI_RETUNING_TIMER_COUNT_MASK 0x00000F00
-#define SDHCI_RETUNING_TIMER_COUNT_SHIFT 8
+#define SDHCI_RETUNING_TIMER_COUNT_MASK GENMASK(11, 8)
#define SDHCI_USE_SDR50_TUNING 0x00002000
-#define SDHCI_RETUNING_MODE_MASK 0x0000C000
-#define SDHCI_RETUNING_MODE_SHIFT 14
-#define SDHCI_CLOCK_MUL_MASK 0x00FF0000
-#define SDHCI_CLOCK_MUL_SHIFT 16
+#define SDHCI_RETUNING_MODE_MASK GENMASK(15, 14)
+#define SDHCI_CLOCK_MUL_MASK GENMASK(23, 16)
#define SDHCI_CAN_DO_ADMA3 0x08000000
#define SDHCI_SUPPORT_HS400 0x80000000 /* Non-standard */

--
2.17.1