Re: [PATCH 3/3] arm64: dts: rockchip: Add the camera interface description of the PX30

From: Heiko Stuebner
Date: Fri Apr 03 2020 - 12:27:35 EST


Am Freitag, 3. April 2020, 16:21:22 CEST schrieb Maxime Chevallier:
> The PX30 has a camera interface, supporting CSI2, BT656 and Parallel
> modes. Add a DT description for this interface.
>
> Signed-off-by: Maxime Chevallier <maxime.chevallier@xxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/rockchip/px30.dtsi | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi
> index 3e1f51a66daf..38ed35bc9b7a 100644
> --- a/arch/arm64/boot/dts/rockchip/px30.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/px30.dtsi
> @@ -1058,6 +1058,18 @@ dsi_in_vopl: endpoint@1 {
> };
> };
>
> + cif: cif@ff490000 {

nit: please sort by register address, so @ff490000 is definitly
somewhere after that ff460000 of the vopb ;-)

> + compatible = "rockchip,px30-cif";
> + reg = <0x0 0xff490000 0x0 0x200>;
> + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru ACLK_CIF>, <&cru HCLK_CIF>, <&cru PCLK_CIF>, <&cru SCLK_CIF_OUT>;
> + clock-names = "aclk_cif", "hclk_cif", "pclk_cif", "cif_out";
> + resets = <&cru SRST_CIF_A>, <&cru SRST_CIF_H>, <&cru SRST_CIF_PCLKIN>;
> + reset-names = "rst_cif_a", "rst_cif_h", "rst_cif_pclkin";
> + power-domains = <&power PX30_PD_VI>;

nit: while doing the above, ideally just move the power-domains above resets
everthing else is sorted nicely.


Thanks
Heiko

> + status = "disabled";
> + };
> +
> vopb: vop@ff460000 {
> compatible = "rockchip,px30-vop-big";
> reg = <0x0 0xff460000 0x0 0xefc>;
>