Re: [PATCH v4] mtd: clear cache_state to avoid writing to bad blocks repeatedly

From: Greg KH
Date: Tue Mar 31 2020 - 06:42:17 EST


On Tue, Mar 31, 2020 at 09:31:59AM +0800, Xiaoming Ni wrote:
> The function call process is as follows:
> mtd_blktrans_work()
> while (1)
> do_blktrans_request()
> mtdblock_writesect()
> do_cached_write()
> write_cached_data() /*if cache_state is STATE_DIRTY*/
> erase_write()
>
> write_cached_data() returns failure without modifying cache_state
> and cache_offset. So when do_cached_write() is called again,
> write_cached_data() will be called again to perform erase_write()
> on the same cache_offset.
>
> But if this cache_offset points to a bad block, erase_write() will
> always return -EIO. Writing to this mtdblk is equivalent to losing
> the current data, and repeatedly writing to the bad block.
>
> Repeatedly writing a bad block has no real benefits,
> but brings some negative effects:
> 1 Lost subsequent data
> 2 Loss of flash device life
> 3 erase_write() bad blocks are very time-consuming. For example:
> the function do_erase_oneblock() in chips/cfi_cmdset_0020.c or
> chips/cfi_cmdset_0002.c may take more than 20 seconds to return
>
> Therefore, when erase_write() returns -EIO in write_cached_data(),
> clear cache_state to avoid writing to bad blocks repeatedly.
>
> Signed-off-by: Xiaoming Ni <nixiaoming@xxxxxxxxxx>
> Reviewed-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
> ---
> drivers/mtd/mtdblock.c | 11 +++++++----
> 1 file changed, 7 insertions(+), 4 deletions(-)

$ ./scripts/get_maintainer.pl --file drivers/mtd/mtdblock.c
Miquel Raynal <miquel.raynal@xxxxxxxxxxx> (maintainer:MEMORY TECHNOLOGY DEVICES (MTD))
Richard Weinberger <richard@xxxxxx> (maintainer:MEMORY TECHNOLOGY DEVICES (MTD))
Vignesh Raghavendra <vigneshr@xxxxxx> (maintainer:MEMORY TECHNOLOGY DEVICES (MTD))
linux-mtd@xxxxxxxxxxxxxxxxxxx (open list:MEMORY TECHNOLOGY DEVICES (MTD))
linux-kernel@xxxxxxxxxxxxxxx (open list)


No where on there is my name/email, so why am I getting these?

confused,

greg k-h