Re: [RFC PATCH 01/11] Drivers: hv: vmbus: Always handle the VMBus messages on CPU0

From: Andrea Parri
Date: Sat Mar 28 2020 - 14:50:44 EST


On Thu, Mar 26, 2020 at 03:05:17PM +0100, Vitaly Kuznetsov wrote:
> "Andrea Parri (Microsoft)" <parri.andrea@xxxxxxxxx> writes:
>
> > A Linux guest have to pick a "connect CPU" to communicate with the
> > Hyper-V host. This CPU can not be taken offline because Hyper-V does
> > not provide a way to change that CPU assignment.
> >
> > Current code sets the connect CPU to whatever CPU ends up running the
> > function vmbus_negotiate_version(), and this will generate problems if
> > that CPU is taken offine.
> >
> > Establish CPU0 as the connect CPU, and add logics to prevents the
> > connect CPU from being taken offline. We could pick some other CPU,
> > and we could pick that "other CPU" dynamically if there was a reason to
> > do so at some point in the future. But for now, #defining the connect
> > CPU to 0 is the most straightforward and least complex solution.
> >
> > While on this, add inline comments explaining "why" offer and rescind
> > messages should not be handled by a same serialized work queue.
> >
> > Suggested-by: Dexuan Cui <decui@xxxxxxxxxxxxx>
> > Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@xxxxxxxxx>
> > ---
> > drivers/hv/connection.c | 20 +-------------------
> > drivers/hv/hv.c | 7 +++++++
> > drivers/hv/hyperv_vmbus.h | 11 ++++++-----
> > drivers/hv/vmbus_drv.c | 20 +++++++++++++++++---
> > 4 files changed, 31 insertions(+), 27 deletions(-)
> >
> > diff --git a/drivers/hv/connection.c b/drivers/hv/connection.c
> > index 74e77de89b4f3..f4bd306d2cef9 100644
> > --- a/drivers/hv/connection.c
> > +++ b/drivers/hv/connection.c
> > @@ -69,7 +69,6 @@ MODULE_PARM_DESC(max_version,
> > int vmbus_negotiate_version(struct vmbus_channel_msginfo *msginfo, u32 version)
> > {
> > int ret = 0;
> > - unsigned int cur_cpu;
> > struct vmbus_channel_initiate_contact *msg;
> > unsigned long flags;
> >
> > @@ -102,24 +101,7 @@ int vmbus_negotiate_version(struct vmbus_channel_msginfo *msginfo, u32 version)
> >
> > msg->monitor_page1 = virt_to_phys(vmbus_connection.monitor_pages[0]);
> > msg->monitor_page2 = virt_to_phys(vmbus_connection.monitor_pages[1]);
> > - /*
> > - * We want all channel messages to be delivered on CPU 0.
> > - * This has been the behavior pre-win8. This is not
> > - * perf issue and having all channel messages delivered on CPU 0
> > - * would be ok.
> > - * For post win8 hosts, we support receiving channel messagges on
> > - * all the CPUs. This is needed for kexec to work correctly where
> > - * the CPU attempting to connect may not be CPU 0.
> > - */
> > - if (version >= VERSION_WIN8_1) {
> > - cur_cpu = get_cpu();
> > - msg->target_vcpu = hv_cpu_number_to_vp_number(cur_cpu);
> > - vmbus_connection.connect_cpu = cur_cpu;
> > - put_cpu();
> > - } else {
> > - msg->target_vcpu = 0;
> > - vmbus_connection.connect_cpu = 0;
> > - }
> > + msg->target_vcpu = hv_cpu_number_to_vp_number(VMBUS_CONNECT_CPU);
> >
> > /*
> > * Add to list before we send the request since we may
> > diff --git a/drivers/hv/hv.c b/drivers/hv/hv.c
> > index 6098e0cbdb4b0..e2b3310454640 100644
> > --- a/drivers/hv/hv.c
> > +++ b/drivers/hv/hv.c
> > @@ -249,6 +249,13 @@ int hv_synic_cleanup(unsigned int cpu)
> > bool channel_found = false;
> > unsigned long flags;
> >
> > + /*
> > + * Hyper-V does not provide a way to change the connect CPU once
> > + * it is set; we must prevent the connect CPU from going offline.
> > + */
> > + if (cpu == VMBUS_CONNECT_CPU)
> > + return -EBUSY;
> > +
> > /*
> > * Search for channels which are bound to the CPU we're about to
> > * cleanup. In case we find one and vmbus is still connected we need to
> > diff --git a/drivers/hv/hyperv_vmbus.h b/drivers/hv/hyperv_vmbus.h
> > index 70b30e223a578..67fb1edcbf527 100644
> > --- a/drivers/hv/hyperv_vmbus.h
> > +++ b/drivers/hv/hyperv_vmbus.h
> > @@ -212,12 +212,13 @@ enum vmbus_connect_state {
> >
> > #define MAX_SIZE_CHANNEL_MESSAGE HV_MESSAGE_PAYLOAD_BYTE_COUNT
> >
> > -struct vmbus_connection {
> > - /*
> > - * CPU on which the initial host contact was made.
> > - */
> > - int connect_cpu;
> > +/*
> > + * The CPU that Hyper-V will interrupt for VMBUS messages, such as
> > + * CHANNELMSG_OFFERCHANNEL and CHANNELMSG_RESCIND_CHANNELOFFER.
> > + */
> > +#define VMBUS_CONNECT_CPU 0
> >
> > +struct vmbus_connection {
> > u32 msg_conn_id;
> >
> > atomic_t offer_in_progress;
> > diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c
> > index 029378c27421d..7600615e13754 100644
> > --- a/drivers/hv/vmbus_drv.c
> > +++ b/drivers/hv/vmbus_drv.c
> > @@ -1056,14 +1056,28 @@ void vmbus_on_msg_dpc(unsigned long data)
> > /*
> > * If we are handling the rescind message;
> > * schedule the work on the global work queue.
> > + *
> > + * The OFFER message and the RESCIND message should
> > + * not be handled by the same serialized work queue,
> > + * because the OFFER handler may call vmbus_open(),
> > + * which tries to open the channel by sending an
> > + * OPEN_CHANNEL message to the host and waits for
> > + * the host's response; however, if the host has
> > + * rescinded the channel before it receives the
> > + * OPEN_CHANNEL message, the host just silently
> > + * ignores the OPEN_CHANNEL message; as a result,
> > + * the guest's OFFER handler hangs for ever, if we
> > + * handle the RESCIND message in the same serialized
> > + * work queue: the RESCIND handler can not start to
> > + * run before the OFFER handler finishes.
> > */
> > - schedule_work_on(vmbus_connection.connect_cpu,
> > + schedule_work_on(VMBUS_CONNECT_CPU,
> > &ctx->work);
> > break;
> >
> > case CHANNELMSG_OFFERCHANNEL:
> > atomic_inc(&vmbus_connection.offer_in_progress);
> > - queue_work_on(vmbus_connection.connect_cpu,
> > + queue_work_on(VMBUS_CONNECT_CPU,
> > vmbus_connection.work_queue,
> > &ctx->work);
> > break;
> > @@ -1110,7 +1124,7 @@ static void vmbus_force_channel_rescinded(struct vmbus_channel *channel)
> >
> > INIT_WORK(&ctx->work, vmbus_onmessage_work);
> >
> > - queue_work_on(vmbus_connection.connect_cpu,
> > + queue_work_on(VMBUS_CONNECT_CPU,
> > vmbus_connection.work_queue,
> > &ctx->work);
> > }
>
> I tried to refresh my memory on why 'connect_cpu' was introduced and it
> all comes down to the following commit:
>
> commit 7268644734f6a300353a4c4ff8bf3e013ba80f89
> Author: Alex Ng <alexng@xxxxxxxxxxxxx>
> Date: Fri Feb 26 15:13:22 2016 -0800
>
> Drivers: hv: vmbus: Support kexec on ws2012 r2 and above
>
> which for some unknown reason kept hardcoding '0' for pre-win2012-r2 (
> hv_context.vp_index[smp_processor_id()] in all cases would do exactly
> the same I guess ). Later, 'connect_cpu' appeared just to remember our
> choice, I can't see why we didn't go with CPU0 for simplicity.
>
> Reviewed-by: Vitaly Kuznetsov <vkuznets@xxxxxxxxxx>

Applied! Thanks again for the review and all the suggestions,

Andrea