Re: [PATCH 26/28] dt-bindings: spi: Convert spi-pxa2xx to json-schema

From: Rob Herring
Date: Fri Mar 27 2020 - 15:52:46 EST


On Tue, Mar 17, 2020 at 10:39:20AM +0100, Lubomir Rintel wrote:
> A straightforward conversion of the the spi-pxa2xx binding to DT schema
> format using json-schema.
>
> Signed-off-by: Lubomir Rintel <lkundrak@xxxxx>
> ---
> .../bindings/spi/marvell,mmp2-ssp.yaml | 58 +++++++++++++++++++
> .../devicetree/bindings/spi/spi-pxa2xx.txt | 27 ---------
> 2 files changed, 58 insertions(+), 27 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/spi/marvell,mmp2-ssp.yaml
> delete mode 100644 Documentation/devicetree/bindings/spi/spi-pxa2xx.txt
>
> diff --git a/Documentation/devicetree/bindings/spi/marvell,mmp2-ssp.yaml b/Documentation/devicetree/bindings/spi/marvell,mmp2-ssp.yaml
> new file mode 100644
> index 0000000000000..de6b6a53b70d8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/spi/marvell,mmp2-ssp.yaml
> @@ -0,0 +1,58 @@
> +# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)

Same issue on license...

> +# Copyright 2019,2020 Lubomir Rintel <lkundrak@xxxxx>
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/spi/marvell,mmp2-ssp.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: PXA2xx SSP SPI Controller bindings
> +
> +maintainers:
> + - Lubomir Rintel <lkundrak@xxxxx>
> +
> +allOf:
> + - $ref: spi-controller.yaml#
> +
> +properties:
> + compatible:
> + const: marvell,mmp2-ssp
> +
> + interrupts:
> + maxItems: 1
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 1
> +
> + ready-gpios:
> + description: |
> + GPIO used to signal a SPI master that the FIFO is filled and we're
> + ready to service a transfer. Only useful in slave mode.
> + maxItems: 1
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - clocks

> + - '#address-cells'
> + - '#size-cells'

spi-controller.yaml handles these being required and also that they
aren't for slave mode.

> +
> +dependencies:
> + ready-gpios: [ spi-slave ]
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/marvell,mmp2.h>
> + spi@d4035000 {
> + compatible = "marvell,mmp2-ssp";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0xd4035000 0x1000>;
> + clocks = <&soc_clocks MMP2_CLK_SSP0>;
> + interrupts = <0>;
> + };
> +
> +...
> diff --git a/Documentation/devicetree/bindings/spi/spi-pxa2xx.txt b/Documentation/devicetree/bindings/spi/spi-pxa2xx.txt
> deleted file mode 100644
> index e30e0c2a4bce1..0000000000000
> --- a/Documentation/devicetree/bindings/spi/spi-pxa2xx.txt
> +++ /dev/null
> @@ -1,27 +0,0 @@
> -PXA2xx SSP SPI Controller
> -
> -Required properties:
> -- compatible: Must be "marvell,mmp2-ssp".
> -- reg: Offset and length of the device's register set.
> -- interrupts: Should be the interrupt number.
> -- clocks: Should contain a single entry describing the clock input.
> -- #address-cells: Number of cells required to define a chip select address.
> -- #size-cells: Should be zero.
> -
> -Optional properties:
> -- cs-gpios: list of GPIO chip selects. See the SPI bus bindings,
> - Documentation/devicetree/bindings/spi/spi-bus.txt
> -- spi-slave: Empty property indicating the SPI controller is used in slave mode.
> -- ready-gpios: GPIO used to signal a SPI master that the FIFO is filled
> - and we're ready to service a transfer. Only useful in slave mode.
> -
> -Child nodes represent devices on the SPI bus
> - See ../spi/spi-bus.txt
> -
> -Example:
> - ssp1: spi@d4035000 {
> - compatible = "marvell,mmp2-ssp";
> - reg = <0xd4035000 0x1000>;
> - clocks = <&soc_clocks MMP2_CLK_SSP0>;
> - interrupts = <0>;
> - };
> --
> 2.25.1
>