Re: [PATCH v3 4/4] phy: qcom-qmp: Use proper PWRDOWN offset for sm8150 USB

From: Wesley Cheng
Date: Thu Mar 26 2020 - 20:33:02 EST




On 3/25/2020 10:43 AM, Wesley Cheng wrote:
> The register map for SM8150 QMP USB SSPHY has moved
> QPHY_POWER_DOWN_CONTROL to a different offset. Allow for
> an offset in the register table to override default value
> if it is a DP capable PHY.
>
> Signed-off-by: Wesley Cheng <wcheng@xxxxxxxxxxxxxx>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
> index cc04471..71a230a 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
> @@ -164,6 +164,7 @@ enum qphy_reg_layout {
> [QPHY_SW_RESET] = 0x00,
> [QPHY_START_CTRL] = 0x44,
> [QPHY_PCS_STATUS] = 0x14,
> + [QPHY_COM_POWER_DOWN_CONTROL] = 0x40,
> };
>
> static const unsigned int sdm845_ufsphy_regs_layout[] = {
> @@ -1627,6 +1628,9 @@ static int qcom_qmp_phy_com_init(struct qmp_phy *qphy)
> if (cfg->has_phy_com_ctrl)
> qphy_setbits(serdes, cfg->regs[QPHY_COM_POWER_DOWN_CONTROL],
> SW_PWRDN);
> + else if (!cfg->has_phy_com_ctrl && cfg->regs[QPHY_COM_POWER_DOWN_CONTROL])
> + qphy_setbits(pcs, cfg->regs[QPHY_COM_POWER_DOWN_CONTROL],
> + cfg->pwrdn_ctrl);
> else
> qphy_setbits(pcs, QPHY_POWER_DOWN_CONTROL, cfg->pwrdn_ctrl);
>
>

Will add logic to the qcom_qmp_phy_com_exit() API as well to fix the
power down offset if DP com is being used, and will check for
has_phy_dp_com_ctrl instead of !has_phy_com_ctrl, as to ensure this only
applies to PHYs that have DP COM.

--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project