[PATCH v6 0/4] Support for Self Save API in OPAL

From: Pratik Rajesh Sampat
Date: Thu Mar 26 2020 - 03:09:28 EST


v5:https://lists.ozlabs.org/pipermail/skiboot/2020-March/016538.html
Changelog
v5 --> v6
Updated background, motivation and illuminated potential design choices

Background
==========

The power management framework on POWER systems include core idle
states that lose context. Deep idle states namely "winkle" on POWER8
and "stop4" and "stop5" on POWER9 can be entered by a CPU to save
different levels of power, as a consequence of which all the
hypervisor resources such as SPRs and SCOMs are lost.

For most SPRs, saving and restoration of content for SPRs and SCOMs
is handled by the hypervisor kernel prior to entering an post exit
from an idle state respectively. However, there is a small set of
critical SPRs and XSCOMs that are expected to contain sane values even
before the control is transferred to the hypervisor kernel at system
reset vector.

For this purpose, microcode firmware provides a mechanism to restore
values on certain SPRs. The communication mechanism between the
hypervisor kernel and the microcode is a standard interface called
sleep-winkle-engine (SLW) on Power8 and Stop-API on Power9 which is
abstracted by OPAL calls from the hypervisor kernel. The Stop-API
provides an interface known as the self-restore API, to which the SPR
number and a predefined value to be restored on wake-up from a deep
stop state is supplied.


Motivation to introduce a new Stop-API
======================================

The self-restore API expects not just the SPR number but also the
value with which the SPR is restored. This is good for those SPRs such
as HSPRG0 whose values do not change at runtime, since for them, the
kernel can invoke the self-restore API at boot time once the values of
these SPRs are determined.

However, there are use-cases where-in the value to be saved cannot be
known or cannot be updated in the layer it currently is.
The shortcomings and the new use-cases which cannot be served by the
existing self-restore API, serves as motivation for a new API:

Shortcoming1:
------------
In a special wakeup scenario, SPRs such as PSSCR, whose values can
change at runtime, are compelled to make the self-restore API call
every time before entering a deep-idle state rendering it to be
prohibitively expensive

Shortcoming2:
------------
The value of LPCR is dynamic based on if the CPU is entered a stop
state during cpu idle versus cpu hotplug.
Today, an additional self-restore call is made before entering
CPU-Hotplug to clear the PECE1 bit in stop-API so that if we are
woken up by a special wakeup on an offlined CPU, we go back to stop
with the the bit cleared.
There is a overhead of an extra call

New Use-case:
-------------
In the case where the hypervisor is running on an
ultravisor environment, the boot time is too late in the cycle to make
the self-restore API calls, as these cannot be invoked from an
non-secure context anymore

To address these shortcomings, the firmware provides another API known
as the self-save API. The self-save API only takes the SPR number as a
parameter and will ensure that on wakeup from a deep-stop state the
SPR is restored with the value that it contained prior to entering the
deep-stop.

Contrast between self-save and self-restore APIs
================================================

Before entering
deep idle |---------------|
------------> | HCODE A |
| |---------------|
|---------| |
| CPU |----|
|---------| |
| |---------------|
|------------>| HCODE B |
On waking up |---------------|
from deep idle




When a self-restore API is invoked, the HCODE inserts instructions
into "HCODE B" region of the above figure to restore the content of
the SPR to the said value. The "HCODE B" region gets executed soon
after the CPU wakes up from a deep idle state, thus executing the
inserted instructions, thereby restoring the contents of the SPRs to
the required values.

When a self-save API is invoked, the HCODE inserts instructions into
the "HCODE A" region of the above figure to save the content of the
SPR into some location in memory. It also inserts instructions into
the "HCODE B" region to restore the content of the SPR to the
corresponding value saved in the memory by the instructions in "HCODE
A" region.

Thus, in contrast with self-restore, the self-save API *does not* need
a value to be passed to it, since it ensures that the value of SPR
before entering deep stop is saved, and subsequently the same value is
restored.

Self-save and self-restore are complementary features since,
self-restore can help in restoring a different value in the SPR on
wakeup from a deep-idle state than what it had before entering the
deep idle state. This was used in POWER8 for HSPRG0 to distinguish a
wakeup from Winkle vs Fastsleep.

Limitations of self-save
========================
Ideally all SPRs should be available for self-save, but HID0 is very
tricky to implement in microcode due to various endianess quirks.
Couple of implementation schemes were buggy and hence HID0 was left
out to be self-restore only.

The fallout of this limitation is as follows:

* In Non PEF environment, no issue. Linux will use self-restore for
HID0 as it does today and no functional impact.

* In PEF environment, the HID0 restore value is decided by OPAL during
boot and it is setup for LE hypervisor with radix MMU. This is the
default and current working configuration of a PEF environment.
However if there is a change, then HV Linux will try to change the
HID0 value to something different than what OPAL decided, at which
time deep-stop states will be disabled under this new PEF
environment.

A simple and workable design is achieved by scoping the power
management deep-stop state support only to a known default PEF
environment. Any deviation will affect *only* deep stop-state support
(stop4,5) in that environment and not have any functional impediment
to the environment itself.

In future, if there is a need to support changing of HID0 to various
values under PEF environment and support deep-stop states, it can be
worked out via an ultravisor call or improve the microcode design to
include HID0 in self-save. These future scheme would be an extension
and does not break or make the current implementation scheme
redundant.

Design Choices
==============

Presenting the design choices in front of us:

Design-Choice 1:
----------------
Only expose one of self-save or self-restore for all the SPRs. Prefer
Self-save

Pros:
- Simplifies the design heavily, since the Kernel can unambiguously
make one API call for all the SPRs on discovering the presence of
the API type.

Cons:
- Breaks backward compatibility if OPAL always chooses to expose
only the self-save API as the older kernels assume the existence
of self-restore.

- The set of SPRs supported by self-save and self-restore are not
identical. Eg: HID0 is not supported by self-save API. PSSCR
support via self-restore is not robust during special-wakeup.

- As discussed above, self-save and self-restore are
complementary. Thus OPAL apriory choosing one over the other for
all SPRs takes away the flexibility from the kernel.


Design-Choice 2:
----------------
Expose two arrays of SPRs: One set of SPRs that are supported by
self-save. Another set of SPRs supported by self-restore. These two
sets do not intersect. Further, if an SPR is supported by both
self-save and self-restore APIs, expose it only via self-save.

Pros:
- For an SPR the choice for the kernel is unambiguous.

Cons:
- Breaks backward compatibility if OPAL always chooses to expose
the legacy SPRs only via the self-save API as the older kernels
assume the existence of self-restore.

- By making the decision early on, we take away the flexibility
from the kernel to use an API of its choice for an SPR.


Design-Choice 3
---------------
Expose two arrays of SPRs. One set of SPRs that are supported by
self-save API. Another set of SPRs supported by self-restore API. Let
the kernel choose which API to invoke. Even if it wants to always
prefer self-save over self-restore, let that be kernel's choice.

Pros:
- Keeps the design flexible to allow the kernel to take a
decision based on its functional and performance requirements.
Thus, the kernel for instance can make a choice to invoke
self-restore API (when available) for SPRs whose values do not
evolve at runtime, and invoke the self-save API (when
available)
for SPRs whose values will change during runtime.

- Design is backward compatible with older kernels.

Cons:
- The Kernel code will have additional complexity for parsing two
lists of SPRs and making a choice w.r.t invocation of a specific
stop-api.



Patches Organization
====================
Design choice 3 has been chosen as an implementation to demonstrate in
this patch series.

Patch 1:
Commit adds support calling into the self save firmware API.
Also adds abstraction for making platform agnostic calls.

Patch 2:
Commit adds wrappers for the Self Save API for which an OPAL call can
be made.

Patch 3:
Commit adds API to determine the version of the STOP API. This helps
to identify support for self save in the firmware

Patch 4:
Commit adds device tree attributes to advertise self save and self
restore functionality along with the register set as a bitmask
currently supported in the firmware. It also uses the versioning API
to determine support for the self-save feature as a whole.

Pratik Rajesh Sampat (2):
Self save API integration
Advertise the self-save and self-restore attributes in the device tree

Prem Shanker Jha (2):
Self Save: Introducing Support for SPR Self Save
API to verify the STOP API and image compatibility

.../ibm,opal/power-mgt/self-restore.rst | 27 +
.../ibm,opal/power-mgt/self-save.rst | 27 +
doc/opal-api/opal-slw-self-save-reg-181.rst | 49 +
doc/opal-api/opal-slw-set-reg-100.rst | 5 +
doc/power-management.rst | 44 +
hw/slw.c | 205 ++++
include/opal-api.h | 3 +-
include/p9_stop_api.H | 122 ++-
include/skiboot.h | 4 +
libpore/p9_cpu_reg_restore_instruction.H | 11 +-
libpore/p9_hcd_memmap_base.H | 7 +
libpore/p9_stop_api.C | 964 ++++++++++--------
libpore/p9_stop_api.H | 141 ++-
libpore/p9_stop_data_struct.H | 4 +-
libpore/p9_stop_util.H | 27 +-
15 files changed, 1208 insertions(+), 432 deletions(-)
create mode 100644 doc/device-tree/ibm,opal/power-mgt/self-restore.rst
create mode 100644 doc/device-tree/ibm,opal/power-mgt/self-save.rst
create mode 100644 doc/opal-api/opal-slw-self-save-reg-181.rst

--
2.24.1