[PATCH v5 3/4] dt-bindings: phy: Add YAML schemas for Intel ComboPhy

From: Dilip Kota
Date: Wed Mar 25 2020 - 05:00:20 EST


ComboPhy subsystem provides PHY support to various
controllers, viz. PCIe, SATA and EMAC.
Adding YAML schemas for the same.

Signed-off-by: Dilip Kota <eswara.kota@xxxxxxxxxxxxxxx>
---
Changes on v5:
Add changes as per Rob Herring inputs:
Use include/dt-bindings/phy/phy.h values to set intel,phy-mode.
Move children node properties to parent node and remove children
node completely.

Changes on v4:
No Change.

Changes on v3:

Add include/dt-bindings/phy/phy-intel-combphy.h for phy modes.
Add SoC specific compatible "intel,combophy-lgm".
Correct the nodename pattern.
clocks description removed and add maxItems entry.
Remove "simple-bus" as it expects minimum one address
cell and size cell in the children node. Call devm_of_platform_populate()
in the driver to perform "simple-bus" functionality.

Changes on v2:

Add custom 'select'
Pass hardware instance entries with phandles and
remove cell-index and bid entries
Clock, register address space, are same for the children.
So move them to parent node.
Two PHY instances cannot run in different modes,
so move the phy-mode entry to parent node.
Add second child entry in the DT example.

.../devicetree/bindings/phy/intel,combo-phy.yaml | 101 +++++++++++++++++++++
1 file changed, 101 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/intel,combo-phy.yaml

diff --git a/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml b/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml
new file mode 100644
index 000000000000..347d0cdfb80d
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/intel,combo-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel ComboPhy Subsystem
+
+maintainers:
+ - Dilip Kota <eswara.kota@xxxxxxxxxxxxxxx>
+
+description: |
+ Intel Combophy subsystem supports PHYs for PCIe, EMAC and SATA
+ controllers. A single Combophy provides two PHY instances.
+
+properties:
+ $nodename:
+ pattern: "combophy(@.*|-[0-9a-f])*$"
+
+ compatible:
+ items:
+ - const: intel,combophy-lgm
+ - const: intel,combo-phy
+
+ clocks:
+ maxItems: 1
+
+ reg:
+ items:
+ - description: ComboPhy core registers
+ - description: PCIe app core control registers
+
+ reg-names:
+ items:
+ - const: core
+ - const: app
+
+ resets:
+ maxItems: 4
+
+ reset-names:
+ items:
+ - const: phy
+ - const: core
+ - const: iphy0
+ - const: iphy1
+
+ intel,syscfg:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: Chip configuration registers handle and ComboPhy instance id
+
+ intel,hsio:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: HSIO registers handle and ComboPhy instance id on NOC
+
+ intel,aggregation:
+ type: boolean
+ description: |
+ Specify the flag to configure ComboPHY in dual lane mode.
+
+ intel,phy-mode:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Mode of the two phys in ComboPhy.
+ See dt-bindings/phy/phy.h for values.
+
+ "#phy-cells":
+ const: 1
+
+required:
+ - compatible
+ - clocks
+ - reg
+ - reg-names
+ - intel,syscfg
+ - intel,hsio
+ - intel,phy-mode
+ - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/phy/phy.h>
+ combophy@d0a00000 {
+ compatible = "intel,combophy-lgm", "intel,combo-phy";
+ clocks = <&cgu0 1>;
+ #phy-cells = <1>;
+ reg = <0xd0a00000 0x40000>,
+ <0xd0a40000 0x1000>;
+ reg-names = "core", "app";
+ resets = <&rcu0 0x50 6>,
+ <&rcu0 0x50 17>,
+ <&rcu0 0x50 23>,
+ <&rcu0 0x50 24>;
+ reset-names = "phy", "core", "iphy0", "iphy1";
+ intel,syscfg = <&sysconf 0>;
+ intel,hsio = <&hsiol 0>;
+ intel,phy-mode = <PHY_TYPE_PCIE>;
+ intel,aggregation;
+ };
--
2.11.0