[v3 3/6] arm64: dts: sdm845: Add i2c-qcom-cci node

From: Robert Foss
Date: Tue Mar 24 2020 - 11:59:13 EST


The sdm845 SOC ships with a CCI controller, which
has two CCI/I2C buses.

Signed-off-by: Robert Foss <robert.foss@xxxxxxxxxx>
Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
---

Changes since v1:
- Pad addresses to 8 bytes
- Sort clock_camcc by address
- Change cciX pinctrl node names
- Remove pinmux/pinconf nodes from pinctrl nodes
- Remove clk suffix from CCI node clock-names
- Give CCI i2c-bus nodes labels

arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 4 +
arch/arm64/boot/dts/qcom/sdm845.dtsi | 92 ++++++++++++++++++++++
2 files changed, 96 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index eb77aaa6a819..a6b6837c3d68 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -583,3 +583,7 @@ pinconf-rx {
bias-pull-up;
};
};
+
+&cci {
+ status = "ok";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index d42302b8889b..91a60847026f 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -5,6 +5,7 @@
* Copyright (c) 2018, The Linux Foundation. All rights reserved.
*/

+#include <dt-bindings/clock/qcom,camcc-sdm845.h>
#include <dt-bindings/clock/qcom,dispcc-sdm845.h>
#include <dt-bindings/clock/qcom,gcc-sdm845.h>
#include <dt-bindings/clock/qcom,gpucc-sdm845.h>
@@ -1451,6 +1452,42 @@ tlmm: pinctrl@3400000 {
gpio-ranges = <&tlmm 0 0 150>;
wakeup-parent = <&pdc_intc>;

+ cci0_default: cci0-default {
+ /* SDA, SCL */
+ pins = "gpio17", "gpio18";
+ function = "cci_i2c";
+
+ bias-pull-up;
+ drive-strength = <2>; /* 2 mA */
+ };
+
+ cci0_sleep: cci0-sleep {
+ /* SDA, SCL */
+ pins = "gpio17", "gpio18";
+ function = "cci_i2c";
+
+ drive-strength = <2>; /* 2 mA */
+ bias-pull-down;
+ };
+
+ cci1_default: cci1-default {
+ /* SDA, SCL */
+ pins = "gpio19", "gpio20";
+ function = "cci_i2c";
+
+ bias-pull-up;
+ drive-strength = <2>; /* 2 mA */
+ };
+
+ cci1_sleep: cci1-sleep {
+ /* SDA, SCL */
+ pins = "gpio19", "gpio20";
+ function = "cci_i2c";
+
+ drive-strength = <2>; /* 2 mA */
+ bias-pull-down;
+ };
+
qspi_clk: qspi-clk {
pinmux {
pins = "gpio95";
@@ -2608,6 +2645,61 @@ videocc: clock-controller@ab00000 {
#reset-cells = <1>;
};

+ cci: cci@ac4a000 {
+ compatible = "qcom,sdm845-cci";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <0 0x0ac4a000 0 0x4000>;
+ interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
+ power-domains = <&clock_camcc TITAN_TOP_GDSC>;
+
+ clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
+ <&clock_camcc CAM_CC_SOC_AHB_CLK>,
+ <&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+ <&clock_camcc CAM_CC_CPAS_AHB_CLK>,
+ <&clock_camcc CAM_CC_CCI_CLK>,
+ <&clock_camcc CAM_CC_CCI_CLK_SRC>;
+ clock-names = "camnoc_axi",
+ "soc_ahb",
+ "slow_ahb_src",
+ "cpas_ahb",
+ "cci",
+ "cci_src";
+
+ assigned-clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
+ <&clock_camcc CAM_CC_CCI_CLK>;
+ assigned-clock-rates = <80000000>, <37500000>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&cci0_default &cci1_default>;
+ pinctrl-1 = <&cci0_sleep &cci1_sleep>;
+
+ status = "disabled";
+
+ cci_i2c0: i2c-bus@0 {
+ reg = <0>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cci_i2c1: i2c-bus@1 {
+ reg = <1>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ clock_camcc: clock-controller@ad00000 {
+ compatible = "qcom,sdm845-camcc";
+ reg = <0 0x0ad00000 0 0x10000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
mdss: mdss@ae00000 {
compatible = "qcom,sdm845-mdss";
reg = <0 0x0ae00000 0 0x1000>;
--
2.25.1