[PATCH 4.19 34/65] iio: adc: at91-sama5d2_adc: fix differential channels in triggered mode

From: Greg Kroah-Hartman
Date: Tue Mar 24 2020 - 09:13:16 EST


From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>

commit a500f3bd787f8224341e44b238f318c407b10897 upstream.

The differential channels require writing the channel offset register (COR).
Otherwise they do not work in differential mode.
The configuration of COR is missing in triggered mode.

Fixes: 5e1a1da0f8c9 ("iio: adc: at91-sama5d2_adc: add hw trigger and buffer support")
Signed-off-by: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
Cc: <Stable@xxxxxxxxxxxxxxx>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
drivers/iio/adc/at91-sama5d2_adc.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)

--- a/drivers/iio/adc/at91-sama5d2_adc.c
+++ b/drivers/iio/adc/at91-sama5d2_adc.c
@@ -731,6 +731,7 @@ static int at91_adc_configure_trigger(st

for_each_set_bit(bit, indio->active_scan_mask, indio->num_channels) {
struct iio_chan_spec const *chan = at91_adc_chan_get(indio, bit);
+ u32 cor;

if (!chan)
continue;
@@ -740,6 +741,20 @@ static int at91_adc_configure_trigger(st
continue;

if (state) {
+ cor = at91_adc_readl(st, AT91_SAMA5D2_COR);
+
+ if (chan->differential)
+ cor |= (BIT(chan->channel) |
+ BIT(chan->channel2)) <<
+ AT91_SAMA5D2_COR_DIFF_OFFSET;
+ else
+ cor &= ~(BIT(chan->channel) <<
+ AT91_SAMA5D2_COR_DIFF_OFFSET);
+
+ at91_adc_writel(st, AT91_SAMA5D2_COR, cor);
+ }
+
+ if (state) {
at91_adc_writel(st, AT91_SAMA5D2_CHER,
BIT(chan->channel));
/* enable irq only if not using DMA */