[PATCH net-next v7 09/10] net: phy: smsc: use phy_read_poll_timeout() to simplify the code

[Dejin Zheng]

use phy_read_poll_timeout() to replace the poll codes for
simplify lan87xx_read_status() function.

Suggested-by: Andrew Lunn <andrew@xxxxxxx>
Reviewed-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
Signed-off-by: Dejin Zheng <zhengdejin5@xxxxxxxxx>
---
v6 -> v7:
	- adapt to a newly added parameter sleep_before_read.
v5 -> v6:
	- no changed.
v4 -> v5:
	- add msleep before phy_read_poll_timeout() to keep the
	  code more similar
v3 -> v4:
	- add this patch by Andrew's suggestion. Thanks Andrew!

 drivers/net/phy/smsc.c | 16 +++++-----------
 1 file changed, 5 insertions(+), 11 deletions(-)

diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c
index b73298250793..93da7d3d0954 100644
--- a/drivers/net/phy/smsc.c
+++ b/drivers/net/phy/smsc.c
@@ -112,8 +112,6 @@ static int lan87xx_read_status(struct phy_device *phydev)
 	int err = genphy_read_status(phydev);
 
 	if (!phydev->link && priv->energy_enable) {
-		int i;
-
 		/* Disable EDPD to wake up PHY */
 		int rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
 		if (rc < 0)
@@ -125,15 +123,11 @@ static int lan87xx_read_status(struct phy_device *phydev)
 			return rc;
 
 		/* Wait max 640 ms to detect energy */
-		for (i = 0; i < 64; i++) {
-			/* Sleep to allow link test pulses to be sent */
-			msleep(10);
-			rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
-			if (rc < 0)
-				return rc;
-			if (rc & MII_LAN83C185_ENERGYON)
-				break;
-		}
+		phy_read_poll_timeout(phydev, MII_LAN83C185_CTRL_STATUS, rc,
+				      rc & MII_LAN83C185_ENERGYON, 10000,
+				      640000, true);
+		if (rc < 0)
+			return rc;
 
 		/* Re-enable EDPD */
 		rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
-- 
2.25.0