Re: [PATCH] dt-bindings: iio: accel: Add bmi088 accelerometer bindings

[Mike Looijmans]

On 22-03-2020 18:37, Jonathan Cameron wrote:
> On Mon, 16 Mar 2020 07:52:18 +0100
> Mike Looijmans <mike.looijmans@xxxxxxxx> wrote:
>
> > This adds the device-tree bindings for the Bosch Sensortec BMI088 IMU,
> > the accelerometer part.
> >
> > Signed-off-by: Mike Looijmans <mike.looijmans@xxxxxxxx>
> > ---
> >   .../devicetree/bindings/iio/accel/bmi088.txt  | 23 +++++++++++++++++++
>
> Sorry.  All new DT bindings need to be in yaml format.
>
> Please put this in the same series as the driver.

sooy, I noticed this too late, patches are underway in separate mails 
now. Hope that isn't a blocking issue?

> Thanks,
>
> Jonathan
>
> >   1 file changed, 23 insertions(+)
> >   create mode 100644 Documentation/devicetree/bindings/iio/accel/bmi088.txt
> >
> > diff --git a/Documentation/devicetree/bindings/iio/accel/bmi088.txt b/Documentation/devicetree/bindings/iio/accel/bmi088.txt
> > new file mode 100644
> > index 000000000000..691a47726dbc
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/iio/accel/bmi088.txt
> > @@ -0,0 +1,23 @@
> > +* Bosch BMI088 IMU combining accelerometer and gyroscope
> > +
> > +https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmi088-ds001.pdf
> > +
> > +Required properties:
> > +
> > +  - compatible : should be "bosch,bmi088_accel"
> > +  - reg : the I2C address of the sensor or the SPI chip select number
> > +
> > +Optional properties:
> > +
> > +  - interrupts : interrupt mapping for GPIO IRQ, it should be configured with
> > +		 IRQ_TYPE_EDGE_RISING
> > +
> > +Example:
> > +
> > +bmi088_accel@1 {
> > +	compatible = "bosch,bmi088_accel";
> > +	reg = <1>;
> > +	spi-max-frequency = <10000000>;
> > +	interrupt-parent = <&gpio>;
> > +	interrupts = <90 IRQ_TYPE_EDGE_RISING>;
> > +};


--
Mike Looijmans