[PATCH 3/6] arm64: dts: rockchip: fix rtl8211e nodename for rk3399-nanopi4

[Johan Jonker]

A test with the command below gives these errors:

arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dt.yaml: phy@1:
'#phy-cells' is a required property
arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4.dt.yaml: phy@1:
'#phy-cells' is a required property
arch/arm64/boot/dts/rockchip/rk3399-nanopi-neo4.dt.yaml: phy@1:
'#phy-cells' is a required property

The rtl8211e node is used by a phy-handle.
The parent node is compatible with "snps,dwmac-mdio",
so change nodename to 'ethernet-phy', for which '#phy-cells'
is not a required property.

make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/schemas/
phy/phy-provider.yaml

Signed-off-by: Johan Jonker <jbx6244@xxxxxxxxx>
---
 arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
index c88018a0e..20529105c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
@@ -182,7 +182,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		rtl8211e: phy@1 {
+		rtl8211e: ethernet-phy@1 {
 			reg = <1>;
 			interrupt-parent = <&gpio3>;
 			interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
-- 
2.11.0