[PATCH v11 10/12] docs: coresight: Update documentation for CoreSight to cover CTI

From: Mathieu Poirier
Date: Fri Mar 20 2020 - 12:53:21 EST


From: Mike Leach <mike.leach@xxxxxxxxxx>

Add new document covering CTI / CTM usage in CoreSight.

Add section in coresight.rst introducing CTI and CTM modules with link
to new document.

Signed-off-by: Mike Leach <mike.leach@xxxxxxxxxx>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
Reviewed-by: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
Signed-off-by: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
---
.../trace/coresight/coresight-ect.rst | 222 ++++++++++++++++++
Documentation/trace/coresight/coresight.rst | 13 +
2 files changed, 235 insertions(+)
create mode 100644 Documentation/trace/coresight/coresight-ect.rst

diff --git a/Documentation/trace/coresight/coresight-ect.rst b/Documentation/trace/coresight/coresight-ect.rst
new file mode 100644
index 000000000000..ecc1e57012ef
--- /dev/null
+++ b/Documentation/trace/coresight/coresight-ect.rst
@@ -0,0 +1,222 @@
+.. SPDX-License-Identifier: GPL-2.0
+=============================================
+CoreSight Embedded Cross Trigger (CTI & CTM).
+=============================================
+
+ :Author: Mike Leach <mike.leach@xxxxxxxxxx>
+ :Date: November 2019
+
+Hardware Description
+--------------------
+
+The CoreSight Cross Trigger Interface (CTI) is a hardware device that takes
+individual input and output hardware signals known as triggers to and from
+devices and interconnects them via the Cross Trigger Matrix (CTM) to other
+devices via numbered channels, in order to propagate events between devices.
+
+e.g.::
+
+ 0000000 in_trigs :::::::
+ 0 C 0----------->: : +======>(other CTI channel IO)
+ 0 P 0<-----------: : v
+ 0 U 0 out_trigs : : Channels ***** :::::::
+ 0000000 : CTI :<=========>*CTM*<====>: CTI :---+
+ ####### in_trigs : : (id 0-3) ***** ::::::: v
+ # ETM #----------->: : ^ #######
+ # #<-----------: : +---# ETR #
+ ####### out_trigs ::::::: #######
+
+The CTI driver enables the programming of the CTI to attach triggers to
+channels. When an input trigger becomes active, the attached channel will
+become active. Any output trigger attached to that channel will also
+become active. The active channel is propagated to other CTIs via the CTM,
+activating connected output triggers there, unless filtered by the CTI
+channel gate.
+
+It is also possible to activate a channel using system software directly
+programming registers in the CTI.
+
+The CTIs are registered by the system to be associated with CPUs and/or other
+CoreSight devices on the trace data path. When these devices are enabled the
+attached CTIs will also be enabled. By default/on power up the CTIs have
+no programmed trigger/channel attachments, so will not affect the system
+until explicitly programmed.
+
+The hardware trigger connections between CTIs and devices is implementation
+defined, unless the CPU/ETM combination is a v8 architecture, in which case
+the connections have an architecturally defined standard layout.
+
+The hardware trigger signals can also be connected to non-CoreSight devices
+(e.g. UART), or be propagated off chip as hardware IO lines.
+
+All the CTI devices are associated with a CTM. On many systems there will be a
+single effective CTM (one CTM, or multiple CTMs all interconnected), but it is
+possible that systems can have nets of CTIs+CTM that are not interconnected by
+a CTM to each other. On these systems a CTM index is declared to associate
+CTI devices that are interconnected via a given CTM.
+
+Sysfs files and directories
+---------------------------
+
+The CTI devices appear on the existing CoreSight bus alongside the other
+CoreSight devices::
+
+ >$ ls /sys/bus/coresight/devices
+ cti_cpu0 cti_cpu2 cti_sys0 etm0 etm2 funnel0 replicator0 tmc_etr0
+ cti_cpu1 cti_cpu3 cti_sys1 etm1 etm3 funnel1 tmc_etf0 tpiu0
+
+The ``cti_cpu<N>`` named CTIs are associated with a CPU, and any ETM used by
+that core. The ``cti_sys<N>`` CTIs are general system infrastructure CTIs that
+can be associated with other CoreSight devices, or other system hardware
+capable of generating or using trigger signals.::
+
+ >$ ls /sys/bus/coresight/devices/etm0/cti_cpu0
+ channels ctmid enable nr_trigger_cons mgmt power powered regs
+ subsystem triggers0 triggers1 uevent
+
+*Key file items are:-*
+ * ``enable``: enables/disables the CTI. Read to determine current state.
+ If this shows as enabled (1), but ``powered`` shows unpowered (0), then
+ the enable indicates a request to enabled when the device is powered.
+ * ``ctmid`` : associated CTM - only relevant if system has multiple CTI+CTM
+ clusters that are not interconnected.
+ * ``nr_trigger_cons`` : total connections - triggers<N> directories.
+ * ``powered`` : Read to determine if the CTI is currently powered.
+
+*Sub-directories:-*
+ * ``triggers<N>``: contains list of triggers for an individual connection.
+ * ``channels``: Contains the channel API - CTI main programming interface.
+ * ``regs``: Gives access to the raw programmable CTI regs.
+ * ``mgmt``: the standard CoreSight management registers.
+
+
+triggers<N> directories
+~~~~~~~~~~~~~~~~~~~~~~~
+
+Individual trigger connection information. This describes trigger signals for
+CoreSight and non-CoreSight connections.
+
+Each triggers directory has a set of parameters describing the triggers for
+the connection.
+
+ * ``name`` : name of connection
+ * ``in_signals`` : input trigger signal indexes used in this connection.
+ * ``in_types`` : functional types for in signals.
+ * ``out_signals`` : output trigger signals for this connection.
+ * ``out_types`` : functional types for out signals.
+
+e.g::
+
+ >$ ls ./cti_cpu0/triggers0/
+ in_signals in_types name out_signals out_types
+ >$ cat ./cti_cpu0/triggers0/name
+ cpu0
+ >$ cat ./cti_cpu0/triggers0/out_signals
+ 0-2
+ >$ cat ./cti_cpu0/triggers0/out_types
+ pe_edbgreq pe_dbgrestart pe_ctiirq
+ >$ cat ./cti_cpu0/triggers0/in_signals
+ 0-1
+ >$ cat ./cti_cpu0/triggers0/in_types
+ pe_dbgtrigger pe_pmuirq
+
+If a connection has zero signals in either the 'in' or 'out' triggers then
+those parameters will be omitted.
+
+Channels API Directory
+~~~~~~~~~~~~~~~~~~~~~~
+
+This provides an easy way to attach triggers to channels, without needing
+the multiple register operations that are required if manipulating the
+'regs' sub-directory elements directly.
+
+A number of files provide this API::
+
+ >$ ls ./cti_sys0/channels/
+ chan_clear chan_inuse chan_xtrigs_out trigin_attach
+ chan_free chan_pulse chan_xtrigs_reset trigin_detach
+ chan_gate_disable chan_set chan_xtrigs_sel trigout_attach
+ chan_gate_enable chan_xtrigs_in trig_filter_enable trigout_detach
+ trigout_filtered
+
+Most access to these elements take the form::
+
+ echo <chan> [<trigger>] > /<device_path>/<operation>
+
+where the optional <trigger> is only needed for trigXX_attach | detach
+operations.
+
+e.g.::
+
+ >$ echo 0 1 > ./cti_sys0/channels/trigout_attach
+ >$ echo 0 > ./cti_sys0/channels/chan_set
+
+Attaches trigout(1) to channel(0), then activates channel(0) generating a
+set state on cti_sys0.trigout(1)
+
+
+*API operations*
+
+ * ``trigin_attach, trigout_attach``: Attach a channel to a trigger signal.
+ * ``trigin_detach, trigout_detach``: Detach a channel from a trigger signal.
+ * ``chan_set``: Set the channel - the set state will be propagated around
+ the CTM to other connected devices.
+ * ``chan_clear``: Clear the channel.
+ * ``chan_pulse``: Set the channel for a single CoreSight clock cycle.
+ * ``chan_gate_enable``: Write operation sets the CTI gate to propagate
+ (enable) the channel to other devices. This operation takes a channel
+ number. CTI gate is enabled for all channels by default at power up. Read
+ to list the currently enabled channels on the gate.
+ * ``chan_gate_disable``: Write channel number to disable gate for that
+ channel.
+ * ``chan_inuse``: Show the current channels attached to any signal
+ * ``chan_free``: Show channels with no attached signals.
+ * ``chan_xtrigs_sel``: write a channel number to select a channel to view,
+ read to show the selected channel number.
+ * ``chan_xtrigs_in``: Read to show the input triggers attached to
+ the selected view channel.
+ * ``chan_xtrigs_out``:Read to show the output triggers attached to
+ the selected view channel.
+ * ``trig_filter_enable``: Defaults to enabled, disable to allow potentially
+ dangerous output signals to be set.
+ * ``trigout_filtered``: Trigger out signals that are prevented from being
+ set if filtering ``trig_filter_enable`` is enabled. One use is to prevent
+ accidental ``EDBGREQ`` signals stopping a core.
+ * ``chan_xtrigs_reset``: Write 1 to clear all channel / trigger programming.
+ Resets device hardware to default state.
+
+
+The example below attaches input trigger index 1 to channel 2, and output
+trigger index 6 to the same channel. It then examines the state of the
+channel / trigger connections using the appropriate sysfs attributes.
+
+The settings mean that if either input trigger 1, or channel 2 go active then
+trigger out 6 will go active. We then enable the CTI, and use the software
+channel control to activate channel 2. We see the active channel on the
+``choutstatus`` register and the active signal on the ``trigoutstatus``
+register. Finally clearing the channel removes this.
+
+e.g.::
+
+ .../cti_sys0/channels# echo 2 1 > trigin_attach
+ .../cti_sys0/channels# echo 2 6 > trigout_attach
+ .../cti_sys0/channels# cat chan_free
+ 0-1,3
+ .../cti_sys0/channels# cat chan_inuse
+ 2
+ .../cti_sys0/channels# echo 2 > chan_xtrigs_sel
+ .../cti_sys0/channels# cat chan_xtrigs_trigin
+ 1
+ .../cti_sys0/channels# cat chan_xtrigs_trigout
+ 6
+ .../cti_sys0/# echo 1 > enable
+ .../cti_sys0/channels# echo 2 > chan_set
+ .../cti_sys0/channels# cat ../regs/choutstatus
+ 0x4
+ .../cti_sys0/channels# cat ../regs/trigoutstatus
+ 0x40
+ .../cti_sys0/channels# echo 2 > chan_clear
+ .../cti_sys0/channels# cat ../regs/trigoutstatus
+ 0x0
+ .../cti_sys0/channels# cat ../regs/choutstatus
+ 0x0
diff --git a/Documentation/trace/coresight/coresight.rst b/Documentation/trace/coresight/coresight.rst
index a566719f8e7e..108600ee1e12 100644
--- a/Documentation/trace/coresight/coresight.rst
+++ b/Documentation/trace/coresight/coresight.rst
@@ -491,8 +491,21 @@ interface provided for that purpose by the generic STM API::

Details on how to use the generic STM API can be found here:- :doc:`../stm` [#second]_.

+The CTI & CTM Modules
+---------------------
+
+The CTI (Cross Trigger Interface) provides a set of trigger signals between
+individual CTIs and components, and can propagate these between all CTIs via
+channels on the CTM (Cross Trigger Matrix).
+
+A separate documentation file is provided to explain the use of these devices.
+(:doc:`coresight-ect`) [#fourth]_.
+
+
.. [#first] Documentation/ABI/testing/sysfs-bus-coresight-devices-stm

.. [#second] Documentation/trace/stm.rst

.. [#third] https://github.com/Linaro/perf-opencsd
+
+.. [#fourth] Documentation/trace/coresight/coresight-ect.rst
--
2.20.1