[PATCH V2] clk: imx: clk-pllv3: Use readl_relaxed_poll_timeout() for PLL lock wait

From: Anson Huang
Date: Thu Mar 19 2020 - 19:51:08 EST


Use readl_relaxed_poll_timeout() for PLL lock wait which can simplify the
code a lot.

Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
Reviewed-by: Abel Vesa <abel.vesa@xxxxxxx>
---
Changes since V1:
- Use readl_relaxed_poll_timeout() instead of readl_poll_timeout().
---
drivers/clk/imx/clk-pllv3.c | 16 +++++-----------
1 file changed, 5 insertions(+), 11 deletions(-)

diff --git a/drivers/clk/imx/clk-pllv3.c b/drivers/clk/imx/clk-pllv3.c
index df91a82..a7db930 100644
--- a/drivers/clk/imx/clk-pllv3.c
+++ b/drivers/clk/imx/clk-pllv3.c
@@ -7,6 +7,7 @@
#include <linux/clk-provider.h>
#include <linux/delay.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/err.h>
@@ -25,6 +26,8 @@
#define IMX7_ENET_PLL_POWER (0x1 << 5)
#define IMX7_DDR_PLL_POWER (0x1 << 20)

+#define PLL_LOCK_TIMEOUT 10000
+
/**
* struct clk_pllv3 - IMX PLL clock version 3
* @clk_hw: clock source
@@ -53,23 +56,14 @@ struct clk_pllv3 {

static int clk_pllv3_wait_lock(struct clk_pllv3 *pll)
{
- unsigned long timeout = jiffies + msecs_to_jiffies(10);
u32 val = readl_relaxed(pll->base) & pll->power_bit;

/* No need to wait for lock when pll is not powered up */
if ((pll->powerup_set && !val) || (!pll->powerup_set && val))
return 0;

- /* Wait for PLL to lock */
- do {
- if (readl_relaxed(pll->base) & BM_PLL_LOCK)
- break;
- if (time_after(jiffies, timeout))
- break;
- usleep_range(50, 500);
- } while (1);
-
- return readl_relaxed(pll->base) & BM_PLL_LOCK ? 0 : -ETIMEDOUT;
+ return readl_relaxed_poll_timeout(pll->base, val, val & BM_PLL_LOCK,
+ 500, PLL_LOCK_TIMEOUT);
}

static int clk_pllv3_prepare(struct clk_hw *hw)
--
2.7.4