Re: [PATCH] clk: imx: clk-pllv3: Use readl_poll_timeout() for PLL lock wait

[Stephen Boyd]

Quoting Anson Huang (2020-03-17 20:26:44)
> diff --git a/drivers/clk/imx/clk-pllv3.c b/drivers/clk/imx/clk-pllv3.c
> index df91a82..3dfa9c3 100644
> --- a/drivers/clk/imx/clk-pllv3.c
> +++ b/drivers/clk/imx/clk-pllv3.c
> @@ -53,23 +56,14 @@ struct clk_pllv3 {
>  
>  static int clk_pllv3_wait_lock(struct clk_pllv3 *pll)
>  {
> -       unsigned long timeout = jiffies + msecs_to_jiffies(10);
>         u32 val = readl_relaxed(pll->base) & pll->power_bit;
>  
>         /* No need to wait for lock when pll is not powered up */
>         if ((pll->powerup_set && !val) || (!pll->powerup_set && val))
>                 return 0;
>  
> -       /* Wait for PLL to lock */
> -       do {
> -               if (readl_relaxed(pll->base) & BM_PLL_LOCK)
> -                       break;
> -               if (time_after(jiffies, timeout))
> -                       break;
> -               usleep_range(50, 500);
> -       } while (1);
> -
> -       return readl_relaxed(pll->base) & BM_PLL_LOCK ? 0 : -ETIMEDOUT;
> +       return readl_poll_timeout(pll->base, val, val & BM_PLL_LOCK, 500,

Did you want to use readl_relaxed_poll_timeout() to keep it the same as
before?