Re: [PATCH 2/7] dt-bindings: usb: dwc3: Add a gpio-usb-connector example

[Bryan O'Donoghue]

On 19/03/2020 01:08, Stephen Boyd wrote:
> Quoting Bryan O'Donoghue (2020-03-11 12:14:56)
> > A USB connector should be a child node of the USB controller
> > connector/usb-connector.txt. This patch adds an example of how to do this
> > to the dwc3 binding descriptions.
>
> I read that as a child of the USB interface controller, which is not the
> same as the USB controller. For example, we're talking about having the
> usb connector be a child of the EC on ChromeOS devices because that
> manages the connector
>
> > It is necessary to declare a connector as a child-node of a USB controller
> > for role-switching to work, so this example should be helpful to others
> > implementing that.
>
> Maybe it should be a virtual node at the root of the DT if it's GPIO
> controlled? And then the phy can be connected to the usb connector
> through the graph binding.

Graph binding can probably work.

Re: the PHY.

For myself the hardware model is

Connector -> PHY -> Host controller -> Host controller wrapper

Only

Connector -> Host controller -> Host controller wrapper

care about the USB role though.

If your PHY did care about the role, you'd really need to write a 
connector/phy type-c type driver, to detect the state and toggle your 
PHY bits before doing usb_role_switch_set_role() back to DWC3.

At least that's my understanding.

---
bod