[PATCH v4 2/5] media: i2c: ov5645: Switch to assigned-clock-rates

From: Lad Prabhakar
Date: Thu Mar 19 2020 - 08:21:23 EST


This patch switches to assigned-clock-rates for specifying the clock rate.
The clk-conf.c internally handles setting the clock rate when
assigned-clock-rates is passed.

The driver now sets the clock frequency only if the deprecated property
clock-frequency is defined instead assigned-clock-rates, this is to avoid
breakage with existing DT binaries.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
---
drivers/media/i2c/ov5645.c | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/media/i2c/ov5645.c b/drivers/media/i2c/ov5645.c
index a6c17d15d754..e298acdadeef 100644
--- a/drivers/media/i2c/ov5645.c
+++ b/drivers/media/i2c/ov5645.c
@@ -1094,25 +1094,25 @@ static int ov5645_probe(struct i2c_client *client)
return PTR_ERR(ov5645->xclk);
}

- ret = of_property_read_u32(dev->of_node, "clock-frequency", &xclk_freq);
- if (ret) {
- dev_err(dev, "could not get xclk frequency\n");
- return ret;
+ /* check if deprecated property clock-frequency is defined */
+ ret = of_property_read_u32(dev->of_node, "clock-frequency",
+ &xclk_freq);
+ if (!ret) {
+ ret = clk_set_rate(ov5645->xclk, xclk_freq);
+ if (ret) {
+ dev_err(dev, "could not set xclk frequency\n");
+ return ret;
+ }
}

/* external clock must be 24MHz, allow 1% tolerance */
+ xclk_freq = clk_get_rate(ov5645->xclk);
if (xclk_freq < 23760000 || xclk_freq > 24240000) {
dev_err(dev, "external clock frequency %u is not supported\n",
xclk_freq);
return -EINVAL;
}

- ret = clk_set_rate(ov5645->xclk, xclk_freq);
- if (ret) {
- dev_err(dev, "could not set xclk frequency\n");
- return ret;
- }
-
for (i = 0; i < OV5645_NUM_SUPPLIES; i++)
ov5645->supplies[i].supply = ov5645_supply_name[i];

--
2.20.1