Re: [PATCH v12 07/10] soc: mediatek: Add extra sram control

From: Nicolas Boichat
Date: Tue Mar 10 2020 - 23:14:20 EST


On Mon, Feb 17, 2020 at 11:35 AM Weiyi Lu <weiyi.lu@xxxxxxxxxxxx> wrote:
>
> For some power domains like vpu_core on MT8183 whose sram need to
> do clock and internal isolation while power on/off sram.
> We add a cap "MTK_SCPD_SRAM_ISO" to judge if we need to do
> the extra sram isolation control or not.
>
> Signed-off-by: Weiyi Lu <weiyi.lu@xxxxxxxxxxxx>

Still looks good to me, and addresses Matthias' comments AFAICT:

Reviewed-by: Nicolas Boichat <drinkcat@xxxxxxxxxxxx>

> ---
> drivers/soc/mediatek/mtk-scpsys.c | 22 ++++++++++++++++++++--
> 1 file changed, 20 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
> index 2a9478f..98cc5ed 100644
> --- a/drivers/soc/mediatek/mtk-scpsys.c
> +++ b/drivers/soc/mediatek/mtk-scpsys.c
> @@ -26,6 +26,7 @@
>
> #define MTK_SCPD_ACTIVE_WAKEUP BIT(0)
> #define MTK_SCPD_FWAIT_SRAM BIT(1)
> +#define MTK_SCPD_SRAM_ISO BIT(2)
> #define MTK_SCPD_CAPS(_scpd, _x) ((_scpd)->data->caps & (_x))
>
> #define SPM_VDE_PWR_CON 0x0210
> @@ -57,6 +58,8 @@
> #define PWR_ON_BIT BIT(2)
> #define PWR_ON_2ND_BIT BIT(3)
> #define PWR_CLK_DIS_BIT BIT(4)
> +#define PWR_SRAM_CLKISO_BIT BIT(5)
> +#define PWR_SRAM_ISOINT_B_BIT BIT(6)
>
> #define PWR_STATUS_CONN BIT(1)
> #define PWR_STATUS_DISP BIT(3)
> @@ -234,6 +237,14 @@ static int scpsys_sram_enable(struct scp_domain *scpd, void __iomem *ctl_addr)
> return ret;
> }
>
> + if (MTK_SCPD_CAPS(scpd, MTK_SCPD_SRAM_ISO)) {
> + val = readl(ctl_addr) | PWR_SRAM_ISOINT_B_BIT;
> + writel(val, ctl_addr);
> + udelay(1);
> + val &= ~PWR_SRAM_CLKISO_BIT;
> + writel(val, ctl_addr);
> + }
> +
> return 0;
> }
>
> @@ -243,8 +254,15 @@ static int scpsys_sram_disable(struct scp_domain *scpd, void __iomem *ctl_addr)
> u32 pdn_ack = scpd->data->sram_pdn_ack_bits;
> int tmp;
>
> - val = readl(ctl_addr);
> - val |= scpd->data->sram_pdn_bits;
> + if (MTK_SCPD_CAPS(scpd, MTK_SCPD_SRAM_ISO)) {
> + val = readl(ctl_addr) | PWR_SRAM_CLKISO_BIT;
> + writel(val, ctl_addr);
> + val &= ~PWR_SRAM_ISOINT_B_BIT;
> + writel(val, ctl_addr);
> + udelay(1);
> + }
> +
> + val = readl(ctl_addr) | scpd->data->sram_pdn_bits;
> writel(val, ctl_addr);
>
> /* Either wait until SRAM_PDN_ACK all 1 or 0 */
> --
> 1.8.1.1.dirty