Re: [PATCH v4 06/13] firmware: arm_scmi: Add notification callbacks-registration

From: Jonathan Cameron
Date: Mon Mar 09 2020 - 07:50:11 EST


On Wed, 4 Mar 2020 16:25:51 +0000
Cristian Marussi <cristian.marussi@xxxxxxx> wrote:

> Add core SCMI Notifications callbacks-registration support: allow users
> to register their own callbacks against the desired events.
> Whenever a registration request is issued against a still non existent
> event, mark such request as pending for later processing, in order to
> account for possible late initializations of SCMI Protocols associated
> to loadable drivers.
>
> Signed-off-by: Cristian Marussi <cristian.marussi@xxxxxxx>
Another one that you should run the kernel-doc scripts over. I haven't checked
but fairly sure they won't like some of this...

Otherwise a few trivial things inline.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>

Thanks,

Jonathan

> ---
> V3 --> V4
> - split registered_handlers hashtable on a per-protocol basis to reduce
> unneeded contention
> - introduced pending_handlers table and related late_init worker to finalize
> handlers registration upon effective protocols' registrations
> - introduced further safe accessors macros for registered_protocols
> and registered_events arrays
> V2 --> V3
> - refactored get/put event_handler
> - removed generic non-handle-based API
> V1 --> V2
> - splitted out of V1 patch 04
> - moved from IDR maps to real HashTables to store event_handlers
> - added proper enable_events refcounting via __scmi_enable_evt()
> [was broken in V1 when using ALL_SRCIDs notification chains]
> - reviewed hashtable cleanup strategy in scmi_notifications_exit()
> - added scmi_register_event_notifier()/scmi_unregister_event_notifier()
> to include/linux/scmi_protocol.h as a candidate user API
> [no EXPORTs still]
> - added notify_ops to handle during initialization as an additional
> internal API for scmi_drivers
> ---
> drivers/firmware/arm_scmi/notify.c | 700 +++++++++++++++++++++++++++++
> drivers/firmware/arm_scmi/notify.h | 12 +
> include/linux/scmi_protocol.h | 50 +++
> 3 files changed, 762 insertions(+)
>
> diff --git a/drivers/firmware/arm_scmi/notify.c b/drivers/firmware/arm_scmi/notify.c
> index 31e49cb7d88e..d6c08cce3c63 100644
> --- a/drivers/firmware/arm_scmi/notify.c
> +++ b/drivers/firmware/arm_scmi/notify.c
> @@ -16,18 +16,50 @@
> * this core its set of supported events using @scmi_register_protocol_events():
> * all the needed descriptors are stored in the @registered_protocols and
> * @registered_events arrays.
> + *
> + * Kernel users interested in some specific event can register their callbacks
> + * providing the usual notifier_block descriptor, since this core implements
> + * events' delivery using the standard Kernel notification chains machinery.
> + *
> + * Given the number of possible events defined by SCMI and the extensibility
> + * of the SCMI Protocol itself, the underlying notification chains are created
> + * and destroyed dynamically on demand depending on the number of users
> + * effectively registered for an event, so that no support structures or chains
> + * are allocated until at least one user has registered a notifier_block for
> + * such event. Similarly, events' generation itself is enabled at the platform
> + * level only after at least one user has registered, and it is shutdown after
> + * the last user for that event has gone.
> + *
> + * All users provided callbacks and allocated notification-chains are stored in
> + * the @registered_events_handlers hashtable. Callbacks' registration requests
> + * for still to be registered events are instead kept in the dedicated common
> + * hashtable @pending_events_handlers.
> + *
> + * An event is identified univocally by the tuple (proto_id, evt_id, src_id)
> + * and is served by its own dedicated notification chain; information contained
> + * in such tuples is used, in a few different ways, to generate the needed
> + * hash-keys.
> + *
> + * Here proto_id and evt_id are simply the protocol_id and message_id numbers
> + * as described in the SCMI Protocol specification, while src_id represents an
> + * optional, protocol dependent, source identifier (like domain_id, perf_id
> + * or sensor_id and so forth).
> */
>
> #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
>
> #include <linux/atomic.h>
> +#include <linux/bitfield.h>
> #include <linux/bug.h>
> #include <linux/compiler.h>
> #include <linux/device.h>
> #include <linux/err.h>
> +#include <linux/hashtable.h>
> #include <linux/kernel.h>
> #include <linux/kfifo.h>
> +#include <linux/list.h>
> #include <linux/mutex.h>
> +#include <linux/notifier.h>
> #include <linux/refcount.h>
> #include <linux/scmi_protocol.h>
> #include <linux/slab.h>
> @@ -47,6 +79,71 @@
> #define MAKE_ALL_SRCS_KEY(p, e) \
> MAKE_HASH_KEY((p), (e), SCMI_ALL_SRC_IDS)
>
> +/**
> + * Assumes that the stored obj includes its own hash-key in a field named 'key':
> + * with this simplification this macro can be equally used for all the objects'
> + * types hashed by this implementation.
> + *
> + * @__ht: The hashtable name
> + * @__obj: A pointer to the object type to be retrieved from the hashtable;
> + * it will be used as a cursor while scanning the hastable and it will
> + * be possibly left as NULL when @__k is not found
> + * @__k: The key to search for
> + */
> +#define KEY_FIND(__ht, __obj, __k) \
> +({ \
> + hash_for_each_possible((__ht), (__obj), hash, (__k)) \
> + if (likely((__obj)->key == (__k))) \
> + break; \
> + __obj; \
> +})
> +
> +#define PROTO_ID_MASK GENMASK(31, 24)
> +#define EVT_ID_MASK GENMASK(23, 16)
> +#define SRC_ID_MASK GENMASK(15, 0)
> +#define KEY_XTRACT_PROTO_ID(key) FIELD_GET(PROTO_ID_MASK, (key))
> +#define KEY_XTRACT_EVT_ID(key) FIELD_GET(EVT_ID_MASK, (key))
> +#define KEY_XTRACT_SRC_ID(key) FIELD_GET(SRC_ID_MASK, (key))
> +
> +/**
> + * A set of macros used to access safely @registered_protocols and
> + * @registered_events arrays; these are fixed in size and each entry is possibly
> + * populated at protocols' registration time and then only read but NEVER
> + * modified or removed.
> + */
> +#define SCMI_GET_PROTO(__ni, __pid) \
> +({ \
> + struct scmi_registered_protocol_events_desc *__pd = NULL; \
> + \
> + if ((__ni) && (__pid) < SCMI_MAX_PROTO) \
> + __pd = READ_ONCE((__ni)->registered_protocols[(__pid)]);\
> + __pd; \
> +})
> +
> +#define SCMI_GET_REVT_FROM_PD(__pd, __eid) \
> +({ \
> + struct scmi_registered_event *__revt = NULL; \
> + \
> + if ((__pd) && (__eid) < (__pd)->num_events) \
> + __revt = READ_ONCE((__pd)->registered_events[(__eid)]); \
> + __revt; \
> +})
> +
> +#define SCMI_GET_REVT(__ni, __pid, __eid) \
> +({ \
> + struct scmi_registered_event *__revt = NULL; \
> + struct scmi_registered_protocol_events_desc *__pd = NULL; \
> + \
> + __pd = SCMI_GET_PROTO((__ni), (__pid)); \
> + __revt = SCMI_GET_REVT_FROM_PD(__pd, (__eid)); \
> + __revt; \
> +})
> +
> +/* A couple of utility macros to limit cruft when calling protocols' helpers */
> +#define REVT_NOTIFY_ENABLE(revt, ...) \
> + ((revt)->proto->ops->set_notify_enabled((revt)->proto->ni->handle, \
> + __VA_ARGS__))
> +
> struct scmi_registered_protocol_events_desc;
>
> /**
> @@ -60,16 +157,25 @@ struct scmi_registered_protocol_events_desc;
> * @initialized: A flag that indicates if the core resources have been allocated
> * and protocols are allowed to register their supported events
> * @enabled: A flag to indicate events can be enabled and start flowing
> + * @init_work: A work item to perform final initializations of pending handlers
> + * @pending_mtx: A mutex to protect @pending_events_handlers
> * @registered_protocols: An statically allocated array containing pointers to
> * all the registered protocol-level specific information
> * related to events' handling
> + * @pending_events_handlers: An hashtable containing all pending events'
> + * handlers descriptors
> */
> struct scmi_notify_instance {
> void *gid;
> struct scmi_handle *handle;
> atomic_t initialized;
> atomic_t enabled;
> +
> + struct work_struct init_work;
> +
> + struct mutex pending_mtx;
> struct scmi_registered_protocol_events_desc **registered_protocols;
> + DECLARE_HASHTABLE(pending_events_handlers, 8);
> };
>
> /**
> @@ -132,6 +238,9 @@ struct scmi_registered_event;
> * @registered_events: A dynamically allocated array holding all the registered
> * events' descriptors, whose fixed-size is determined at
> * compile time.
> + * @registered_mtx: A mutex to protect @registered_events_handlers
> + * @registered_events_handlers: An hashtable containing all events' handlers
> + * descriptors registered for this protocol
> */
> struct scmi_registered_protocol_events_desc {
> u8 id;
> @@ -143,6 +252,8 @@ struct scmi_registered_protocol_events_desc {
> void *in_flight;
> int num_events;
> struct scmi_registered_event **registered_events;
> + struct mutex registered_mtx;
> + DECLARE_HASHTABLE(registered_events_handlers, 8);
> };
>
> /**
> @@ -175,6 +286,38 @@ struct scmi_registered_event {
> struct mutex sources_mtx;
> };
>
> +/**
> + * scmi_event_handler - Event handler information
> + *
> + * This structure collects all the information needed to process a received
> + * event identified by the tuple (proto_id, evt_id, src_id).
> + * These descriptors are stored in a per-protocol @registered_events_handlers
> + * table using as a key a value derived from that tuple.
> + *
> + * @key: The used hashkey
> + * @users: A reference count for number of active users for this handler
> + * @r_evt: A reference to the associated registered event; when this is NULL
> + * this handler is pending, which means that identifies a set of
> + * callbacks intended to be attached to an event which is still not
> + * known nor registered by any protocol at that point in time
> + * @chain: The notification chain dedicated to this specific event tuple
> + * @hash: The hlist_node used for collision handling
> + * @enabled: A boolean which records if event's generation has been already
> + * enabled for this handler as a whole
> + */
> +struct scmi_event_handler {
> + u32 key;
> + refcount_t users;
> + struct scmi_registered_event *r_evt;
> + struct blocking_notifier_head chain;
> + struct hlist_node hash;
> + bool enabled;
> +};
> +
> +#define IS_HNDL_PENDING(hndl) ((hndl)->r_evt == NULL)
> +
> +static void scmi_put_handler_unlocked(struct scmi_notify_instance *ni,
> + struct scmi_event_handler *hndl);
> /**
> * scmi_initialize_events_queue - Allocate/Initialize a kfifo buffer
> *
> @@ -252,6 +395,10 @@ scmi_allocate_registered_protocol_desc(struct scmi_notify_instance *ni,
> return ERR_PTR(-ENOMEM);
> pd->num_events = num_events;
>
> + /* Initialize per protocol handlers table */
> + mutex_init(&pd->registered_mtx);
> + hash_init(pd->registered_events_handlers);
> +
> return pd;
> }
>
> @@ -338,6 +485,12 @@ int scmi_register_protocol_events(const struct scmi_handle *handle,
>
> devres_close_group(ni->handle->dev, ni->gid);
>
> + /*
> + * Finalize any pending events' handler which could have been waiting
> + * for this protocol's events registration.
> + */
> + schedule_work(&ni->init_work);
> +
> return 0;
>
> err:
> @@ -349,6 +502,547 @@ int scmi_register_protocol_events(const struct scmi_handle *handle,
> return -ENOMEM;
> }
>
> +/**
> + * scmi_allocate_event_handler - Allocate Event handler
> + *
> + * Allocate an event handler and related notification chain associated with
> + * the provided event handler key.
> + * Note that, at this point, a related registered_event is still to be
> + * associated to this handler descriptor (hndl->r_evt == NULL), so the handler
> + * is initialized as pending.
> + *
> + * Assumes to be called with @pending_mtx already acquired.
> + *
> + * @ni: A reference to the notification instance to use
> + * @evt_key: 32bit key uniquely bind to the event identified by the tuple
> + * (proto_id, evt_id, src_id)
> + *
> + * Return: the freshly allocated structure on Success
> + */
> +static struct scmi_event_handler *
> +scmi_allocate_event_handler(struct scmi_notify_instance *ni, u32 evt_key)
> +{
> + struct scmi_event_handler *hndl;
> +
> + hndl = kzalloc(sizeof(*hndl), GFP_KERNEL);
> + if (!hndl)
> + return ERR_PTR(-ENOMEM);
> + hndl->key = evt_key;
> + BLOCKING_INIT_NOTIFIER_HEAD(&hndl->chain);
> + refcount_set(&hndl->users, 1);
> + /* New handlers are created pending */
> + hash_add(ni->pending_events_handlers, &hndl->hash, hndl->key);
> +
> + return hndl;
> +}
> +
> +/**
> + * scmi_free_event_handler - Free the provided Event handler
> + *
> + * Assumes to be called with proper locking acquired depending on the situation.
> + *
> + * @hndl: The event handler structure to free
> + */
> +static void scmi_free_event_handler(struct scmi_event_handler *hndl)
> +{
> + hash_del(&hndl->hash);
> + kfree(hndl);
> +}
> +
> +/**
> + * scmi_bind_event_handler - Helper to attempt binding an handler to an event
> + *
> + * If an associated registered event is found, move the handler from the pending
> + * into the registered table.
> + *
> + * Assumes to be called with @pending_mtx already acquired.
> + *
> + * @ni: A reference to the notification instance to use
> + * @hndl: The event handler to bind
> + *
> + * Return: True if bind was successful, False otherwise
> + */
> +static inline bool scmi_bind_event_handler(struct scmi_notify_instance *ni,
> + struct scmi_event_handler *hndl)
> +{
> + struct scmi_registered_event *r_evt;
> +
> +
> + r_evt = SCMI_GET_REVT(ni, KEY_XTRACT_PROTO_ID(hndl->key),
> + KEY_XTRACT_EVT_ID(hndl->key));
> + if (unlikely(!r_evt))
> + return false;
> +
> + /* Remove from pending and insert into registered */
> + hash_del(&hndl->hash);
> + hndl->r_evt = r_evt;
> + mutex_lock(&r_evt->proto->registered_mtx);
> + hash_add(r_evt->proto->registered_events_handlers,
> + &hndl->hash, hndl->key);
> + mutex_unlock(&r_evt->proto->registered_mtx);
> +
> + return true;
> +}
> +
> +/**
> + * scmi_valid_pending_handler - Helper to check pending status of handlers
> + *
> + * An handler is considered pending when its r_evt == NULL, because the related
> + * event was still unknown at handler's registration time; anyway, since all
> + * protocols register their supported events once for all at protocols'
> + * initialization time, a pending handler cannot be considered valid anymore if
> + * the underlying event (which it is waiting for), belongs to an already
> + * initialized and registered protocol.
> + *
> + * @ni: A reference to the notification instance to use
> + * @hndl: The event handler to check
> + *
> + * Return: True if pending registration is still valid, False otherwise.
> + */
> +static inline bool scmi_valid_pending_handler(struct scmi_notify_instance *ni,
> + struct scmi_event_handler *hndl)
> +{
> + struct scmi_registered_protocol_events_desc *pd;
> +
> + if (unlikely(!IS_HNDL_PENDING(hndl)))
> + return false;
> +
> + pd = SCMI_GET_PROTO(ni, KEY_XTRACT_PROTO_ID(hndl->key));
> + if (pd)
> + return false;
> +
> + return true;
> +}
> +
> +/**
> + * scmi_register_event_handler - Register whenever possible an Event handler
> + *
> + * At first try to bind an event handler to its associated event, then check if
> + * it was at least a valid pending handler: if it was not bound nor valid return
> + * false.
> + *
> + * Valid pending incomplete bindings will be periodically retried by a dedicated
> + * worker which is kicked each time a new protocol completes its own
> + * registration phase.
> + *
> + * Assumes to be called with @pending_mtx acquired.
> + *
> + * @ni: A reference to the notification instance to use
> + * @hndl: The event handler to register
> + *
> + * Return: True if a normal or a valid pending registration has been completed,
> + * False otherwise
> + */
> +static bool scmi_register_event_handler(struct scmi_notify_instance *ni,
> + struct scmi_event_handler *hndl)
> +{
> + bool ret;
> +
> + ret = scmi_bind_event_handler(ni, hndl);
> + if (ret) {
> + pr_info("SCMI Notifications: registered NEW handler - key:%X\n",
> + hndl->key);
> + } else {
> + ret = scmi_valid_pending_handler(ni, hndl);
> + if (ret)
> + pr_info("SCMI Notifications: registered PENDING handler - key:%X\n",
> + hndl->key);
> + }
> +
> + return ret;
> +}
> +
> +/**
> + * __scmi_event_handler_get_ops - Utility to get or create an event handler
> + *
> + * Search for the desired handler matching the key in both the per-protocol
> + * registered table and the common pending table:
> + * - if found adjust users refcount
> + * - if not found and @create is true, create and register the new handler:
> + * handler could end up being registered as pending if no matching event
> + * could be found.
> + *
> + * An handler is guaranteed to reside in one and only one of the tables at
> + * any one time; to ensure this the whole search and create is performed
> + * holding the @pending_mtx lock, with @registered_mtx additionally acquired
> + * if needed.
> + * Note that when a nested acquisition of these mutexes is needed the locking
> + * order is always (same as in @init_work):
> + * 1. pending_mtx
> + * 2. registered_mtx
> + *
> + * Events generation is NOT enabled right after creation within this routine
> + * since at creation time we usually want to have all setup and ready before
> + * events really start flowing.
> + *
> + * @ni: A reference to the notification instance to use
> + * @evt_key: The event key to use
> + * @create: A boolean flag to specify if a handler must be created when
> + * not already existent
> + *
> + * Return: A properly refcounted handler on Success, NULL on Failure
> + */
> +static inline struct scmi_event_handler *
> +__scmi_event_handler_get_ops(struct scmi_notify_instance *ni,
> + u32 evt_key, bool create)
> +{
> + struct scmi_registered_event *r_evt;
> + struct scmi_event_handler *hndl = NULL;
> +
> + r_evt = SCMI_GET_REVT(ni, KEY_XTRACT_PROTO_ID(evt_key),
> + KEY_XTRACT_EVT_ID(evt_key));
> +
> + mutex_lock(&ni->pending_mtx);
> + /* Search registered events at first ... if possible at all */
> + if (likely(r_evt)) {
> + mutex_lock(&r_evt->proto->registered_mtx);
> + hndl = KEY_FIND(r_evt->proto->registered_events_handlers,
> + hndl, evt_key);
> + if (likely(hndl))
> + refcount_inc(&hndl->users);
> + mutex_unlock(&r_evt->proto->registered_mtx);
> + }
> +
> + /* ...then amongst pending. */
> + if (unlikely(!hndl)) {
> + hndl = KEY_FIND(ni->pending_events_handlers, hndl, evt_key);
> + if (likely(hndl))
> + refcount_inc(&hndl->users);
> + }
> +
> + /* Create if still not found and required */
> + if (!hndl && create) {
> + hndl = scmi_allocate_event_handler(ni, evt_key);
> + if (!IS_ERR_OR_NULL(hndl)) {
> + if (!scmi_register_event_handler(ni, hndl)) {
> + pr_info("SCMI Notifications: purging UNKNOWN handler - key:%X\n",
> + hndl->key);
> + /* this hndl can be only a pending one */
> + scmi_put_handler_unlocked(ni, hndl);
> + hndl = NULL;
> + }
> + }
> + }
> + mutex_unlock(&ni->pending_mtx);
> +
> + return hndl;
> +}
> +
> +static struct scmi_event_handler *
> +scmi_get_handler(struct scmi_notify_instance *ni, u32 evt_key)
> +{
> + return __scmi_event_handler_get_ops(ni, evt_key, false);
> +}
> +
> +static struct scmi_event_handler *
> +scmi_get_or_create_handler(struct scmi_notify_instance *ni, u32 evt_key)
> +{
> + return __scmi_event_handler_get_ops(ni, evt_key, true);
> +}
> +
> +/**
> + * __scmi_enable_evt - Enable/disable events generation
> + *
> + * Takes care of proper refcounting while performing enable/disable: handles
> + * the special case of ALL sources requests by itself.
> + *
> + * @r_evt: The registered event to act upon
> + * @src_id: The src_id to act upon
> + * @enable: The action to perform: true->Enable, false->Disable
> + *
> + * Return: True when the required @action has been successfully executed
> + */
> +static inline bool __scmi_enable_evt(struct scmi_registered_event *r_evt,
> + u32 src_id, bool enable)
> +{
> + int ret = 0;
> + u32 num_sources;
> + refcount_t *sid;
> +
> + if (src_id == SCMI_ALL_SRC_IDS) {
> + src_id = 0;
> + num_sources = r_evt->num_sources;
> + } else if (src_id < r_evt->num_sources) {
> + num_sources = 1;
> + } else {
> + return ret;
> + }
> +
> + mutex_lock(&r_evt->sources_mtx);
> + if (enable) {
> + for (; num_sources; src_id++, num_sources--) {
> + bool r;
> +
> + sid = &r_evt->sources[src_id];
> + if (refcount_read(sid) == 0) {
> + r = REVT_NOTIFY_ENABLE(r_evt,
> + r_evt->evt->id,
> + src_id, enable);

I would make the enable explicit in this call so it is obvious we are
in the enable path rather than disable.

> + if (r)
> + refcount_set(sid, 1);
> + } else {
> + refcount_inc(sid);
> + r = true;
> + }
> + ret += r;
> + }
> + } else {
> + for (; num_sources; src_id++, num_sources--) {
> + sid = &r_evt->sources[src_id];
> + if (refcount_dec_and_test(sid))
> + REVT_NOTIFY_ENABLE(r_evt,
> + r_evt->evt->id,
> + src_id, enable);

As above, make the enable value explicit.

> + }
> + ret = 1;
> + }
> + mutex_unlock(&r_evt->sources_mtx);
> +
> + return ret;
> +}
> +
> +static bool scmi_enable_events(struct scmi_event_handler *hndl)
> +{
> + if (!hndl->enabled)
> + hndl->enabled = __scmi_enable_evt(hndl->r_evt,
> + KEY_XTRACT_SRC_ID(hndl->key),
> + true);
> + return hndl->enabled;
> +}
> +
> +static bool scmi_disable_events(struct scmi_event_handler *hndl)
> +{
> + if (hndl->enabled)
> + hndl->enabled = !__scmi_enable_evt(hndl->r_evt,
> + KEY_XTRACT_SRC_ID(hndl->key),
> + false);
> + return !hndl->enabled;
> +}
> +
> +/**
> + * scmi_put_handler_unlocked - Put an event handler
> + *
> + * After having got exclusive access to the registered handlers hashtable,
> + * update the refcount and if @hndl is no more in use by anyone:
> + *
> + * - ask for events' generation disabling
> + * - unregister and free the handler itself
> + *
> + * Assumes all the proper locking has been managed by the caller.
> + *
> + * @ni: A reference to the notification instance to use
> + * @hndl: The event handler to act upon
> + */
> +
> +static void
> +scmi_put_handler_unlocked(struct scmi_notify_instance *ni,
> + struct scmi_event_handler *hndl)
> +{
> + if (refcount_dec_and_test(&hndl->users)) {
> + if (likely(!IS_HNDL_PENDING(hndl)))
> + scmi_disable_events(hndl);
> + scmi_free_event_handler(hndl);
> + }
> +}
> +
> +static void scmi_put_handler(struct scmi_notify_instance *ni,
> + struct scmi_event_handler *hndl)
> +{
> + struct scmi_registered_event *r_evt = hndl->r_evt;
> +
> + mutex_lock(&ni->pending_mtx);
> + if (r_evt)
> + mutex_lock(&r_evt->proto->registered_mtx);
> +
> + scmi_put_handler_unlocked(ni, hndl);
> +
> + if (r_evt)
> + mutex_unlock(&r_evt->proto->registered_mtx);
> + mutex_unlock(&ni->pending_mtx);
> +}
> +
> +/**
> + * scmi_event_handler_enable_events - Enable events associated to an handler
> + *
> + * @hndl: The Event handler to act upon
> + *
> + * Return: True on success
> + */
> +static bool scmi_event_handler_enable_events(struct scmi_event_handler *hndl)
> +{
> + if (!scmi_enable_events(hndl)) {
> + pr_err("SCMI Notifications: Failed to ENABLE events for key:%X !\n",
> + hndl->key);
> + return false;
> + }
> +
> + return true;
> +}
> +
> +/**
> + * scmi_register_notifier - Register a notifier_block for an event
> + *
> + * Generic helper to register a notifier_block against a protocol event.
> + *
> + * A notifier_block @nb will be registered for each distinct event identified
> + * by the tuple (proto_id, evt_id, src_id) on a dedicated notification chain
> + * so that:
> + *
> + * (proto_X, evt_Y, src_Z) --> chain_X_Y_Z
> + *
> + * @src_id meaning is protocol specific and identifies the origin of the event
> + * (like domain_id, sensor_id and so forth).
> + *
> + * @src_id can be NULL to signify that the caller is interested in receiving
> + * notifications from ALL the available sources for that protocol OR simply that
> + * the protocol does not support distinct sources.
> + *
> + * As soon as one user for the specified tuple appears, an handler is created,
> + * and that specific event's generation is enabled at the platform level, unless
> + * an associated registered event is found missing, meaning that the needed
> + * protocol is still to be initialized and the handler has just been registered
> + * as still pending.
> + *
> + * @handle: The handle identifying the platform instance against which the
> + * callback is registered
> + * @proto_id: Protocol ID
> + * @evt_id: Event ID
> + * @src_id: Source ID, when NULL register for events coming form ALL possible
> + * sources
> + * @nb: A standard notifier block to register for the specified event
> + *
> + * Return: Return 0 on Success
> + */
> +static int scmi_register_notifier(const struct scmi_handle *handle,
> + u8 proto_id, u8 evt_id, u32 *src_id,
> + struct notifier_block *nb)
> +{
> + int ret = 0;
> + u32 evt_key;
> + struct scmi_event_handler *hndl;
> + struct scmi_notify_instance *ni = handle->notify_priv;
> +
> + if (unlikely(!ni || !atomic_read(&ni->initialized)))
> + return 0;
> +
> + evt_key = MAKE_HASH_KEY(proto_id, evt_id,
> + src_id ? *src_id : SCMI_ALL_SRC_IDS);
> + hndl = scmi_get_or_create_handler(ni, evt_key);
> + if (IS_ERR_OR_NULL(hndl))
> + return PTR_ERR(hndl);
> +
> + blocking_notifier_chain_register(&hndl->chain, nb);
> +
> + /* Enable events for not pending handlers */
> + if (likely(!IS_HNDL_PENDING(hndl))) {
> + if (!scmi_event_handler_enable_events(hndl)) {
> + scmi_put_handler(ni, hndl);
> + ret = -EINVAL;
> + }
> + }
> +
> + return ret;
> +}
> +
> +/**
> + * scmi_unregister_notifier - Unregister a notifier_block for an event
> + *
> + * Takes care to unregister the provided @nb from the notification chain
> + * associated to the specified event and, if there are no more users for the
> + * event handler, frees also the associated event handler structures.
> + * (this could possibly cause disabling of event's generation at platform level)
> + *
> + * @handle: The handle identifying the platform instance against which the
> + * callback is unregistered
> + * @proto_id: Protocol ID
> + * @evt_id: Event ID
> + * @src_id: Source ID
> + * @nb: The notifier_block to unregister
> + *
> + * Return: 0 on Success
> + */
> +static int scmi_unregister_notifier(const struct scmi_handle *handle,
> + u8 proto_id, u8 evt_id, u32 *src_id,
> + struct notifier_block *nb)
> +{
> + u32 evt_key;
> + struct scmi_event_handler *hndl;
> + struct scmi_notify_instance *ni = handle->notify_priv;
> +
> + if (unlikely(!ni || !atomic_read(&ni->initialized)))
> + return 0;
> +
> + evt_key = MAKE_HASH_KEY(proto_id, evt_id,
> + src_id ? *src_id : SCMI_ALL_SRC_IDS);
> + hndl = scmi_get_handler(ni, evt_key);
> + if (IS_ERR_OR_NULL(hndl))
> + return -EINVAL;
> +
> + blocking_notifier_chain_unregister(&hndl->chain, nb);
> + scmi_put_handler(ni, hndl);
> +
> + /*
> + * Free the handler (and stop events) if this happens to be the last
> + * known user callback for this handler; a possible concurrently ongoing
> + * run of @scmi_lookup_and_call_event_chain will cause this to happen
> + * in that context safely instead.
> + */
> + scmi_put_handler(ni, hndl);
> +
> + return 0;
> +}
> +
> +/**
> + * scmi_protocols_late_init - Worker for late initialization
> + *
> + * This kicks in whenever a new protocol has completed its own registration via
> + * scmi_register_protocol_events(): it is in charge of scanning the table of
> + * pending handlers (registered by users while the related protocol was still
> + * not initialized) and finalizing their initialization whenever possible;
> + * invalid pending handlers are purged at this point in time.
> + *
> + * @work: The work item to use associated to the proper SCMI instance
> + */
> +static void scmi_protocols_late_init(struct work_struct *work)
> +{
> + int bkt;
> + struct scmi_event_handler *hndl;
> + struct scmi_notify_instance *ni;
> + struct hlist_node *tmp;
> +
> + ni = container_of(work, struct scmi_notify_instance, init_work);
> +
> + mutex_lock(&ni->pending_mtx);
> + hash_for_each_safe(ni->pending_events_handlers, bkt, tmp, hndl, hash) {
> + bool ret;
> +
> + ret = scmi_bind_event_handler(ni, hndl);
> + if (ret) {
> + pr_info("SCMI Notifications: finalized PENDING handler - key:%X\n",
> + hndl->key);
> + ret = scmi_event_handler_enable_events(hndl);
> + } else {
> + ret = scmi_valid_pending_handler(ni, hndl);
> + }
> + if (!ret) {
> + pr_info("SCMI Notifications: purging PENDING handler - key:%X\n",
> + hndl->key);
> + /* this hndl can be only a pending one */
> + scmi_put_handler_unlocked(ni, hndl);
> + }
> + }
> + mutex_unlock(&ni->pending_mtx);
> +}
> +
> +/*
> + * notify_ops are attached to the handle so that can be accessed
> + * directly from an scmi_driver to register its own notifiers.
> + */
> +static struct scmi_notify_ops notify_ops = {
> + .register_event_notifier = scmi_register_notifier,
> + .unregister_event_notifier = scmi_unregister_notifier,
> +};
> +
> /**
> * scmi_notification_init - Initializes Notification Core Support
> *
> @@ -398,7 +1092,13 @@ int scmi_notification_init(struct scmi_handle *handle)
> if (!ni->registered_protocols)
> goto err;
>
> + mutex_init(&ni->pending_mtx);
> + hash_init(ni->pending_events_handlers);
> +
> + INIT_WORK(&ni->init_work, scmi_protocols_late_init);
> +
> handle->notify_priv = ni;
> + handle->notify_ops = &notify_ops;
>
> atomic_set(&ni->initialized, 1);
> atomic_set(&ni->enabled, 1);
> diff --git a/drivers/firmware/arm_scmi/notify.h b/drivers/firmware/arm_scmi/notify.h
> index a7ece64e8842..f765acda2311 100644
> --- a/drivers/firmware/arm_scmi/notify.h
> +++ b/drivers/firmware/arm_scmi/notify.h
> @@ -9,9 +9,21 @@
> #ifndef _SCMI_NOTIFY_H
> #define _SCMI_NOTIFY_H
>
> +#include <linux/bug.h>
> #include <linux/device.h>
> #include <linux/types.h>
>
> +#define MAP_EVT_TO_ENABLE_CMD(id, map) \
> +({ \
> + int ret = -1; \
> + \
> + if (likely((id) < ARRAY_SIZE((map)))) \
> + ret = (map)[(id)]; \
> + else \
> + WARN(1, "UN-KNOWN evt_id:%d\n", (id)); \
> + ret; \
> +})
> +
> /**
> * scmi_event - Describes an event to be supported
> *
> diff --git a/include/linux/scmi_protocol.h b/include/linux/scmi_protocol.h
> index 0679f10ab05e..797e1e03ae52 100644
> --- a/include/linux/scmi_protocol.h
> +++ b/include/linux/scmi_protocol.h
> @@ -9,6 +9,8 @@
> #define _LINUX_SCMI_PROTOCOL_H
>
> #include <linux/device.h>
> +#include <linux/ktime.h>
> +#include <linux/notifier.h>
> #include <linux/types.h>
>
> #define SCMI_MAX_STR_SIZE 16
> @@ -211,6 +213,52 @@ struct scmi_reset_ops {
> int (*deassert)(const struct scmi_handle *handle, u32 domain);
> };
>
> +/**
> + * scmi_notify_ops - represents notifications' operations provided by SCMI core
> + *
> + * A user can register/unregister its own notifier_block against the wanted
> + * platform instance regarding the desired event identified by the
> + * tuple: (proto_id, evt_id, src_id)
> + *
> + * @register_event_notifier: Register a notifier_block for the requested event
> + * @unregister_event_notifier: Unregister a notifier_block for the requested
> + * event
> + *
> + * where:
> + *
> + * @handle: The handle identifying the platform instance to use
> + * @proto_id: The protocol ID as in SCMI Specification
> + * @evt_id: The message ID of the desired event as in SCMI Specification
> + * @src_id: A pointer to the desired source ID if different sources are
> + * possible for the protocol (like domain_id, sensor_id...etc)
> + *
> + * @src_id can be provided as NULL if it simply does NOT make sense for
> + * the protocol at hand, OR if the user is explicitly interested in
> + * receiving notifications from ANY existent source associated to the
> + * specified proto_id / evt_id.
> + *
> + * Received notifications are finally delivered to the registered users,
> + * invoking the callback provided with the notifier_block *nb as follows:
> + *
> + * int user_cb(nb, evt_id, report)
> + *
> + * with:
> + *
> + * @nb: The notifier block provided by the user
> + * @evt_id: The message ID of the delivered event
> + * @report: A custom struct describing the specific event delivered
> + *
> + * Events' customized report structs are detailed in the following.
> + */
> +struct scmi_notify_ops {
> + int (*register_event_notifier)(const struct scmi_handle *handle,
> + u8 proto_id, u8 evt_id, u32 *src_id,
> + struct notifier_block *nb);
> + int (*unregister_event_notifier)(const struct scmi_handle *handle,
> + u8 proto_id, u8 evt_id, u32 *src_id,
> + struct notifier_block *nb);
> +};
> +
> /**
> * struct scmi_handle - Handle returned to ARM SCMI clients for usage.
> *
> @@ -221,6 +269,7 @@ struct scmi_reset_ops {
> * @clk_ops: pointer to set of clock protocol operations
> * @sensor_ops: pointer to set of sensor protocol operations
> * @reset_ops: pointer to set of reset protocol operations
> + * @notify_ops: pointer to set of notifications related operations
> * @perf_priv: pointer to private data structure specific to performance
> * protocol(for internal use only)
> * @clk_priv: pointer to private data structure specific to clock
> @@ -242,6 +291,7 @@ struct scmi_handle {
> struct scmi_power_ops *power_ops;
> struct scmi_sensor_ops *sensor_ops;
> struct scmi_reset_ops *reset_ops;
> + struct scmi_notify_ops *notify_ops;
> /* for protocol internal use */
> void *perf_priv;
> void *clk_priv;