[PATCH v3 2/2] wl1251: remove ti,power-gpio for SDIO mode

From: H. Nikolaus Schaller
Date: Sun Jan 26 2020 - 15:00:29 EST


Remove handling of this property from code.

Note that wl->power_gpio is still needed in
the header file for SPI mode (N900).

Suggested by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
Signed-off-by: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>
---
drivers/net/wireless/ti/wl1251/sdio.c | 32 ++-------------------------
1 file changed, 2 insertions(+), 30 deletions(-)

diff --git a/drivers/net/wireless/ti/wl1251/sdio.c b/drivers/net/wireless/ti/wl1251/sdio.c
index 94569cd695c8..c9a4e9a43400 100644
--- a/drivers/net/wireless/ti/wl1251/sdio.c
+++ b/drivers/net/wireless/ti/wl1251/sdio.c
@@ -15,9 +15,7 @@
#include <linux/wl12xx.h>
#include <linux/irq.h>
#include <linux/pm_runtime.h>
-#include <linux/gpio.h>
#include <linux/of.h>
-#include <linux/of_gpio.h>
#include <linux/of_irq.h>

#include "wl1251.h"
@@ -160,15 +158,6 @@ static int wl1251_sdio_set_power(struct wl1251 *wl, bool enable)
int ret;

if (enable) {
- /*
- * Power is controlled by runtime PM, but we still call board
- * callback in case it wants to do any additional setup,
- * for example enabling clock buffer for the module.
- */
- if (gpio_is_valid(wl->power_gpio))
- gpio_set_value(wl->power_gpio, true);
-
-
ret = pm_runtime_get_sync(&func->dev);
if (ret < 0) {
pm_runtime_put_sync(&func->dev);
@@ -186,9 +175,6 @@ static int wl1251_sdio_set_power(struct wl1251 *wl, bool enable)
ret = pm_runtime_put_sync(&func->dev);
if (ret < 0)
goto out;
-
- if (gpio_is_valid(wl->power_gpio))
- gpio_set_value(wl->power_gpio, false);
}

out:
@@ -241,31 +227,17 @@ static int wl1251_sdio_probe(struct sdio_func *func,

wl1251_board_data = wl1251_get_platform_data();
if (!IS_ERR(wl1251_board_data)) {
- wl->power_gpio = wl1251_board_data->power_gpio;
wl->irq = wl1251_board_data->irq;
wl->use_eeprom = wl1251_board_data->use_eeprom;
} else if (np) {
- wl->use_eeprom = of_property_read_bool(np,
- "ti,wl1251-has-eeprom");
- wl->power_gpio = of_get_named_gpio(np, "ti,power-gpio", 0);
+ wl->use_eeprom = of_property_read_bool(np, "ti,wl1251-has-eeprom");
wl->irq = of_irq_get(np, 0);
-
- if (wl->power_gpio == -EPROBE_DEFER ||
- wl->irq == -EPROBE_DEFER) {
+ if (wl->irq == -EPROBE_DEFER) {
ret = -EPROBE_DEFER;
goto disable;
}
}

- if (gpio_is_valid(wl->power_gpio)) {
- ret = devm_gpio_request(&func->dev, wl->power_gpio,
- "wl1251 power");
- if (ret) {
- wl1251_error("Failed to request gpio: %d\n", ret);
- goto disable;
- }
- }
-
if (wl->irq) {
irq_set_status_flags(wl->irq, IRQ_NOAUTOEN);
ret = request_irq(wl->irq, wl1251_line_irq, 0, "wl1251", wl);
--
2.23.0