Re: [PATCH v6 0/7] PCI: amlogic: Make PCIe working reliably on AXG platforms

From: Neil Armstrong
Date: Fri Jan 24 2020 - 03:04:08 EST


Hi,

On 24/01/2020 00:29, Remi Pommarel wrote:
> PCIe device probing failures have been seen on AXG platforms and were
> due to unreliable clock signal output. Setting HHI_MIPI_CNTL0[26] bit
> in MIPI's PHY registers solved the problem. This bit controls band gap
> reference.
>
> As discussed here [1] one of these shared MIPI/PCIE analog PHY register
> bits was implemented in the clock driver as CLKID_MIPI_ENABLE. This adds
> a PHY driver to control this bit instead, as well as setting the band
> gap one in order to get reliable PCIE communication.
>
> While at it add another PHY driver to control PCIE only PHY registers,
> making AXG code more similar to G12A platform thus allowing to remove
> some specific platform handling in pci-meson driver.
>
> Please note that CLKID_MIPI_ENABLE removable will be done in a different
> serie.
>
> Changes since v5:
> - Add additionalProperties in device tree binding documentation
> - Make analog PHY required
>
> Changes since v4:
> - Rename the shared MIPI/PCIe PHY to analog
> - Chain the MIPI/PCIe PHY to the PCIe one
>
> Changes since v3:
> - Go back to the shared MIPI/PCIe phy driver solution from v2
> - Remove syscon usage
> - Add all dt-bindings documentation
>
> Changes since v2:
> - Remove shared MIPI/PCIE device driver and use syscon to access register
> in PCIE only driver instead
> - Include devicetree documentation
>
> Changes sinve v1:
> - Move HHI_MIPI_CNTL0 bit control in its own PHY driver
> - Add a PHY driver for PCIE_PHY registers
> - Modify pci-meson.c to make use of both PHYs and remove specific
> handling for AXG and G12A
>
> [1] https://lkml.org/lkml/2019/12/16/119
>
> Remi Pommarel (7):
> dt-bindings: Add AXG PCIE PHY bindings
> dt-bindings: Add AXG shared MIPI/PCIE analog PHY bindings
> dt-bindings: PCI: meson: Update PCIE bindings documentation
> arm64: dts: meson-axg: Add PCIE PHY nodes
> phy: amlogic: Add Amlogic AXG MIPI/PCIE analog PHY Driver
> phy: amlogic: Add Amlogic AXG PCIE PHY Driver
> PCI: amlogic: Use AXG PCIE
>
> .../bindings/pci/amlogic,meson-pcie.txt | 22 +-
> .../amlogic,meson-axg-mipi-pcie-analog.yaml | 35 ++++
> .../bindings/phy/amlogic,meson-axg-pcie.yaml | 52 +++++
> arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 16 ++
> drivers/pci/controller/dwc/pci-meson.c | 116 ++---------
> drivers/phy/amlogic/Kconfig | 22 ++
> drivers/phy/amlogic/Makefile | 12 +-
> .../amlogic/phy-meson-axg-mipi-pcie-analog.c | 188 +++++++++++++++++
> drivers/phy/amlogic/phy-meson-axg-pcie.c | 192 ++++++++++++++++++
> 9 files changed, 543 insertions(+), 112 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml
> create mode 100644 Documentation/devicetree/bindings/phy/amlogic,meson-axg-pcie.yaml
> create mode 100644 drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c
> create mode 100644 drivers/phy/amlogic/phy-meson-axg-pcie.c
>

You forgot to keep the Reviewed-by/Acked-by tags from the previous reviews.

Neil