[PATCH 1/2] dt-bindings: devantech-srf04.yaml: add pm feature

[Andreas Klinger]

Add GPIO line and startup time for usage of power management

Signed-off-by: Andreas Klinger <ak@xxxxxxxxxxxxx>
---
 .../bindings/iio/proximity/devantech-srf04.yaml          | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml b/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
index 4e80ea7c1475..b3fcb3b79485 100644
--- a/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
+++ b/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
@@ -51,6 +51,22 @@ properties:
       the time between two interrupts is measured in the driver.
     maxItems: 1
 
+  power-gpios:
+    description:
+      Definition of the GPIO for power management of connected peripheral
+      (output).
+      This GPIO can be used by the external hardware for power management.
+      When the device gets suspended it's switched off and when it resumes
+      it's switched on again. After some period of inactivity the driver
+      get suspended automatically (autosuspend feature).
+    maxItems: 1
+
+  startup-time-ms:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      This is the startup time the device needs after a resume to be up and
+      running.
+
 required:
   - compatible
   - trig-gpios
-- 
2.11.0