[PATCH 3/3] dt-bindings: Add new chips to bq25890 binding documentation

[Yauhen Kharuzhy]

Add bq25892, bq25895 and bq25896 to list of supported device IDs in the
bq25890 DT binding document.

Signed-off-by: Yauhen Kharuzhy <jekhor@xxxxxxxxx>
---
 Documentation/devicetree/bindings/power/supply/bq25890.txt | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/power/supply/bq25890.txt b/Documentation/devicetree/bindings/power/supply/bq25890.txt
index dc0568933359..dc9c8f76e06c 100644
--- a/Documentation/devicetree/bindings/power/supply/bq25890.txt
+++ b/Documentation/devicetree/bindings/power/supply/bq25890.txt
@@ -1,11 +1,14 @@
 Binding for TI bq25890 Li-Ion Charger
 
-This driver will support the bq25896 and the bq25890. There are other ICs
-in the same family but those have not been tested.
+This driver will support the bq25892, the bq25896 and the bq25890. There are
+other ICs in the same family but those have not been tested.
 
 Required properties:
 - compatible: Should contain one of the following:
     * "ti,bq25890"
+    * "ti,bq25892"
+    * "ti,bq25895"
+    * "ti,bq25896"
 - reg: integer, i2c address of the device.
 - ti,battery-regulation-voltage: integer, maximum charging voltage (in uV);
 - ti,charge-current: integer, maximum charging current (in uA);
-- 
2.25.0.rc0