[PATCH v2 2/3] ARM: dts: imx6qdl-icore-1.5: Remove duplicate phy reset methods

[Jagan Teki]

From: Michael Trimarchi <michael@xxxxxxxxxxxxxxxxxxxx>

Engicam i.CoreM6 1.5 Quad/Dual MIPI dtsi is reusing fec node
from Engicam i.CoreM6 dtsi but have sampe copy of phy-reset-gpio
and phy-mode properties.

So, drop this phy reset methods from imx6qdl-icore-1.5 dsti file.

Cc: Jacopo Mondi <jacopo@xxxxxxxxxx>
Signed-off-by: Michael Trimarchi <michael@xxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
---
Changes for v2:
- new patch.

 arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi b/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi
index d91d46b5898f..0fd7f2e24d9c 100644
--- a/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi
@@ -25,10 +25,8 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
 	clocks = <&clks IMX6QDL_CLK_ENET>,
 		 <&clks IMX6QDL_CLK_ENET>,
 		 <&clks IMX6QDL_CLK_ENET_REF>;
-	phy-mode = "rmii";
 	status = "okay";
 };
-- 
2.18.0.321.gffc6fa0e3