[PATCH AUTOSEL 5.4 004/187] spi: cadence: Correct handling of native chipselect

From: Sasha Levin
Date: Fri Dec 27 2019 - 12:59:30 EST


From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>

[ Upstream commit 61acd19f9c56fa0809285346bd0bd4a926ab0da0 ]

To fix a regression on the Cadence SPI driver, this patch reverts
commit 6046f5407ff0 ("spi: cadence: Fix default polarity of native
chipselect").

This patch was not the correct fix for the issue. The SPI framework
calls the set_cs line with the logic level it desires on the chip select
line, as such the old is_high handling was correct. However, this was
broken by the fact that before commit 3e5ec1db8bfe ("spi: Fix SPI_CS_HIGH
setting when using native and GPIO CS") all controllers that offered
the use of a GPIO chip select had SPI_CS_HIGH applied, even for hardware
chip selects. This caused the value passed into the driver to be inverted.
Which unfortunately makes it look like a logical enable the chip select
value.

Since the core was corrected to not unconditionally apply SPI_CS_HIGH,
the Cadence driver, whilst using the hardware chip select, will deselect
the chip select every time we attempt to communicate with the device,
which results in failed communications.

Fixes: 3e5ec1db8bfe ("spi: Fix SPI_CS_HIGH setting when using native and GPIO CS")
Signed-off-by: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
Acked-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Link: https://lore.kernel.org/r/20191126164140.6240-1-ckeepax@xxxxxxxxxxxxxxxxxxxxx
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/spi/spi-cadence.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/spi/spi-cadence.c b/drivers/spi/spi-cadence.c
index c36587b42e95..82a0ee09cbe1 100644
--- a/drivers/spi/spi-cadence.c
+++ b/drivers/spi/spi-cadence.c
@@ -168,16 +168,16 @@ static void cdns_spi_init_hw(struct cdns_spi *xspi)
/**
* cdns_spi_chipselect - Select or deselect the chip select line
* @spi: Pointer to the spi_device structure
- * @enable: Select (1) or deselect (0) the chip select line
+ * @is_high: Select(0) or deselect (1) the chip select line
*/
-static void cdns_spi_chipselect(struct spi_device *spi, bool enable)
+static void cdns_spi_chipselect(struct spi_device *spi, bool is_high)
{
struct cdns_spi *xspi = spi_master_get_devdata(spi->master);
u32 ctrl_reg;

ctrl_reg = cdns_spi_read(xspi, CDNS_SPI_CR);

- if (!enable) {
+ if (is_high) {
/* Deselect the slave */
ctrl_reg |= CDNS_SPI_CR_SSCTRL;
} else {
--
2.20.1