[PATCH v4 11/13] gpiolib: provide a dedicated function for setting lineinfo

From: Bartosz Golaszewski
Date: Tue Dec 24 2019 - 07:08:16 EST


From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>

We'll soon be filling out the gpioline_info structure in multiple
places. Add a separate function that given a gpio_desc sets all relevant
fields.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
---
drivers/gpio/gpiolib.c | 98 ++++++++++++++++++++++++------------------
1 file changed, 55 insertions(+), 43 deletions(-)

diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 543244355e1c..276a7068f23c 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -1148,6 +1148,60 @@ static int lineevent_create(struct gpio_device *gdev, void __user *ip)
return ret;
}

+static void gpio_desc_to_lineinfo(struct gpio_desc *desc,
+ struct gpioline_info *info)
+{
+ struct gpio_chip *chip = desc->gdev->chip;
+ unsigned long flags;
+
+ spin_lock_irqsave(&gpio_lock, flags);
+
+ if (desc->name) {
+ strncpy(info->name, desc->name, sizeof(info->name));
+ info->name[sizeof(info->name) - 1] = '\0';
+ } else {
+ info->name[0] = '\0';
+ }
+
+ if (desc->label) {
+ strncpy(info->consumer, desc->label, sizeof(info->consumer));
+ info->consumer[sizeof(info->consumer) - 1] = '\0';
+ } else {
+ info->consumer[0] = '\0';
+ }
+
+ /*
+ * Userspace only need to know that the kernel is using this GPIO so
+ * it can't use it.
+ */
+ info->flags = 0;
+ if (test_bit(FLAG_REQUESTED, &desc->flags) ||
+ test_bit(FLAG_IS_HOGGED, &desc->flags) ||
+ test_bit(FLAG_USED_AS_IRQ, &desc->flags) ||
+ test_bit(FLAG_EXPORT, &desc->flags) ||
+ test_bit(FLAG_SYSFS, &desc->flags) ||
+ !pinctrl_gpio_can_use_line(chip->base + info->line_offset))
+ info->flags |= GPIOLINE_FLAG_KERNEL;
+ if (test_bit(FLAG_IS_OUT, &desc->flags))
+ info->flags |= GPIOLINE_FLAG_IS_OUT;
+ if (test_bit(FLAG_ACTIVE_LOW, &desc->flags))
+ info->flags |= GPIOLINE_FLAG_ACTIVE_LOW;
+ if (test_bit(FLAG_OPEN_DRAIN, &desc->flags))
+ info->flags |= (GPIOLINE_FLAG_OPEN_DRAIN |
+ GPIOLINE_FLAG_IS_OUT);
+ if (test_bit(FLAG_OPEN_SOURCE, &desc->flags))
+ info->flags |= (GPIOLINE_FLAG_OPEN_SOURCE |
+ GPIOLINE_FLAG_IS_OUT);
+ if (test_bit(FLAG_BIAS_DISABLE, &desc->flags))
+ info->flags |= GPIOLINE_FLAG_BIAS_DISABLE;
+ if (test_bit(FLAG_PULL_DOWN, &desc->flags))
+ info->flags |= GPIOLINE_FLAG_BIAS_PULL_DOWN;
+ if (test_bit(FLAG_PULL_UP, &desc->flags))
+ info->flags |= GPIOLINE_FLAG_BIAS_PULL_UP;
+
+ spin_unlock_irqrestore(&gpio_lock, flags);
+}
+
/*
* gpio_ioctl() - ioctl handler for the GPIO chardev
*/
@@ -1188,49 +1242,7 @@ static long gpio_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
if (IS_ERR(desc))
return PTR_ERR(desc);

- if (desc->name) {
- strncpy(lineinfo.name, desc->name,
- sizeof(lineinfo.name));
- lineinfo.name[sizeof(lineinfo.name)-1] = '\0';
- } else {
- lineinfo.name[0] = '\0';
- }
- if (desc->label) {
- strncpy(lineinfo.consumer, desc->label,
- sizeof(lineinfo.consumer));
- lineinfo.consumer[sizeof(lineinfo.consumer)-1] = '\0';
- } else {
- lineinfo.consumer[0] = '\0';
- }
-
- /*
- * Userspace only need to know that the kernel is using
- * this GPIO so it can't use it.
- */
- lineinfo.flags = 0;
- if (test_bit(FLAG_REQUESTED, &desc->flags) ||
- test_bit(FLAG_IS_HOGGED, &desc->flags) ||
- test_bit(FLAG_USED_AS_IRQ, &desc->flags) ||
- test_bit(FLAG_EXPORT, &desc->flags) ||
- test_bit(FLAG_SYSFS, &desc->flags) ||
- !pinctrl_gpio_can_use_line(chip->base + lineinfo.line_offset))
- lineinfo.flags |= GPIOLINE_FLAG_KERNEL;
- if (test_bit(FLAG_IS_OUT, &desc->flags))
- lineinfo.flags |= GPIOLINE_FLAG_IS_OUT;
- if (test_bit(FLAG_ACTIVE_LOW, &desc->flags))
- lineinfo.flags |= GPIOLINE_FLAG_ACTIVE_LOW;
- if (test_bit(FLAG_OPEN_DRAIN, &desc->flags))
- lineinfo.flags |= (GPIOLINE_FLAG_OPEN_DRAIN |
- GPIOLINE_FLAG_IS_OUT);
- if (test_bit(FLAG_OPEN_SOURCE, &desc->flags))
- lineinfo.flags |= (GPIOLINE_FLAG_OPEN_SOURCE |
- GPIOLINE_FLAG_IS_OUT);
- if (test_bit(FLAG_BIAS_DISABLE, &desc->flags))
- lineinfo.flags |= GPIOLINE_FLAG_BIAS_DISABLE;
- if (test_bit(FLAG_PULL_DOWN, &desc->flags))
- lineinfo.flags |= GPIOLINE_FLAG_BIAS_PULL_DOWN;
- if (test_bit(FLAG_PULL_UP, &desc->flags))
- lineinfo.flags |= GPIOLINE_FLAG_BIAS_PULL_UP;
+ gpio_desc_to_lineinfo(desc, &lineinfo);

if (copy_to_user(ip, &lineinfo, sizeof(lineinfo)))
return -EFAULT;
--
2.23.0