Re: [RFC PATCH v2 08/11] arm: dts: exynos: Add parents and #interconnect-cells to Exynos4412

From: Chanwoo Choi
Date: Sun Dec 15 2019 - 19:45:52 EST


On 9/19/19 11:22 PM, Artur ÅwigoÅ wrote:
> From: Artur ÅwigoÅ <a.swigon@xxxxxxxxxxxxxxxxxxx>
>
> This patch adds two fields to the Exynos4412 DTS:
> - parent: to declare connections between nodes that are not in a
> parent-child relation in devfreq;
> - #interconnect-cells: required by the interconnect framework.
>
> Please note that #interconnect-cells is always zero and node IDs are not
> hardcoded anywhere. The above-mentioned parent-child relation in devfreq
> means that there is a shared power line ('devfreq' property). The 'parent'
> property only signifies an interconnect connection.
>
> Signed-off-by: Artur ÅwigoÅ <a.swigon@xxxxxxxxxxxxxxxxxxx>
> ---
> arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 1 +
> arch/arm/boot/dts/exynos4412.dtsi | 9 +++++++++
> 2 files changed, 10 insertions(+)
>
> diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
> index ea55f377d17c..bdd61ae86103 100644
> --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
> +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
> @@ -106,6 +106,7 @@
> &bus_leftbus {
> devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
> vdd-supply = <&buck3_reg>;
> + parent = <&bus_dmc>;

As I mentioned on other reply,
I'm not sure to use the specific 'parent' property to make
the connection between buses. If possible, you better to
use the standard way like OF graph. Except for making
the connection between buses by 'parent' property,
looks good to me.


> status = "okay";
> };
>
> diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
> index d20db2dfe8e2..a70a671acacd 100644
> --- a/arch/arm/boot/dts/exynos4412.dtsi
> +++ b/arch/arm/boot/dts/exynos4412.dtsi
> @@ -390,6 +390,7 @@
> clocks = <&clock CLK_DIV_DMC>;
> clock-names = "bus";
> operating-points-v2 = <&bus_dmc_opp_table>;
> + #interconnect-cells = <0>;
> status = "disabled";
> };
>
> @@ -398,6 +399,7 @@
> clocks = <&clock CLK_DIV_ACP>;
> clock-names = "bus";
> operating-points-v2 = <&bus_acp_opp_table>;
> + #interconnect-cells = <0>;
> status = "disabled";
> };
>
> @@ -406,6 +408,7 @@
> clocks = <&clock CLK_DIV_C2C>;
> clock-names = "bus";
> operating-points-v2 = <&bus_dmc_opp_table>;
> + #interconnect-cells = <0>;
> status = "disabled";
> };
>
> @@ -459,6 +462,7 @@
> clocks = <&clock CLK_DIV_GDL>;
> clock-names = "bus";
> operating-points-v2 = <&bus_leftbus_opp_table>;
> + #interconnect-cells = <0>;
> status = "disabled";
> };
>
> @@ -467,6 +471,7 @@
> clocks = <&clock CLK_DIV_GDR>;
> clock-names = "bus";
> operating-points-v2 = <&bus_leftbus_opp_table>;
> + #interconnect-cells = <0>;
> status = "disabled";
> };
>
> @@ -475,6 +480,7 @@
> clocks = <&clock CLK_ACLK160>;
> clock-names = "bus";
> operating-points-v2 = <&bus_display_opp_table>;
> + #interconnect-cells = <0>;
> status = "disabled";
> };
>
> @@ -483,6 +489,7 @@
> clocks = <&clock CLK_ACLK133>;
> clock-names = "bus";
> operating-points-v2 = <&bus_fsys_opp_table>;
> + #interconnect-cells = <0>;
> status = "disabled";
> };
>
> @@ -491,6 +498,7 @@
> clocks = <&clock CLK_ACLK100>;
> clock-names = "bus";
> operating-points-v2 = <&bus_peri_opp_table>;
> + #interconnect-cells = <0>;
> status = "disabled";
> };
>
> @@ -499,6 +507,7 @@
> clocks = <&clock CLK_SCLK_MFC>;
> clock-names = "bus";
> operating-points-v2 = <&bus_leftbus_opp_table>;
> + #interconnect-cells = <0>;
> status = "disabled";
> };
>
>


--
Best Regards,
Chanwoo Choi
Samsung Electronics