Re: [PATCH v2 1/4] iio: adc: ad7923: Remove the unused defines

From: Jonathan Cameron
Date: Sun Dec 15 2019 - 10:47:38 EST


On Wed, 11 Dec 2019 07:26:07 +0000
"Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx> wrote:

> On Tue, 2019-12-10 at 12:08 -0300, Daniel Junho wrote:
> > [External]
> >
> > Removes the unused define AD7923_CHANNEL_x from the code.
> >
> > Signed-off-by: Daniel Junho <djunho@xxxxxxxxx>
> > ---
> > drivers/iio/adc/ad7923.c | 4 ----
> > 1 file changed, 4 deletions(-)
> >
> > diff --git a/drivers/iio/adc/ad7923.c b/drivers/iio/adc/ad7923.c
> > index 3212eb4c0f25..969c06b7d2b7 100644
> > --- a/drivers/iio/adc/ad7923.c
> > +++ b/drivers/iio/adc/ad7923.c
> > @@ -29,10 +29,6 @@
> > #define AD7923_PM_MODE_AS (1) /* auto shutdown */
> > #define AD7923_PM_MODE_FS (2) /* full shutdown */
> > #define AD7923_PM_MODE_OPS (3) /* normal operation */
> > -#define AD7923_CHANNEL_0 (0) /* analog input 0 */
> > -#define AD7923_CHANNEL_1 (1) /* analog input 1 */
> > -#define AD7923_CHANNEL_2 (2) /* analog input 2 */
> > -#define AD7923_CHANNEL_3 (3) /* analog input 3 */
>
> The fact that is not used, is not a problem really.
> This can serve as a "shortcut" for the datasheet.

In some cases I would agree, but here adding a definition to go from
a channel number in text to an actual number doesn't add anything.

If there mapping was more complex then it would be reasonable to have
defines, but here I can't see the point.

So let's keep the patch to drop them. I'll pick it up whilst the
comments on patch 4 have been addressed.

Thanks,

Jonathan


>
> We can leave this as-is [1], or remove it as you do [2], or an alternative
> would be [3]:
> #define AD7923_CHANNEL(x) (x) /* analog channel input */
>
> I don't mind either of these 3 versions ([1], [2] or [3]).
>
> I'll leave it to Jonathan's preference.
>
> > #define AD7923_SEQUENCE_OFF (0) /* no sequence fonction
> > */
> > #define AD7923_SEQUENCE_PROTECT (2) /* no interrupt
> > write cycle */
> > #define AD7923_SEQUENCE_ON (3) /* continuous sequence */