[PATCH v2 06/23] staging: qlge: Fix CHECK: Blank lines aren't necessary after an open brace '{'

From: Scott Schafer
Date: Wed Dec 11 2019 - 13:17:03 EST


Fix CHECK: Blank lines aren't necessary after an open brace '{' in the
following files:

qlge.h
qlge_dbg.c
qlge_main.c
qlge_mpi.c

Signed-off-by: Scott Schafer <schaferjscott@xxxxxxxxx>
---
drivers/staging/qlge/qlge.h | 3 ---
drivers/staging/qlge/qlge_dbg.c | 1 -
drivers/staging/qlge/qlge_main.c | 6 ------
drivers/staging/qlge/qlge_mpi.c | 2 --
4 files changed, 12 deletions(-)

diff --git a/drivers/staging/qlge/qlge.h b/drivers/staging/qlge/qlge.h
index d45c53a053c2..ede767a70b10 100644
--- a/drivers/staging/qlge/qlge.h
+++ b/drivers/staging/qlge/qlge.h
@@ -119,7 +119,6 @@ enum {
* Processor Address Register (PROC_ADDR) bit definitions.
*/
enum {
-
/* Misc. stuff */
MAILBOX_COUNT = 16,
MAILBOX_TIMEOUT = 5,
@@ -1762,7 +1761,6 @@ struct ql_nic_misc {
};

struct ql_reg_dump {
-
/* segment 0 */
struct mpi_coredump_global_header mpi_global_header;

@@ -2059,7 +2057,6 @@ enum {
};

struct nic_operations {
-
int (*get_flash) (struct ql_adapter *);
int (*port_initialize) (struct ql_adapter *);
};
diff --git a/drivers/staging/qlge/qlge_dbg.c b/drivers/staging/qlge/qlge_dbg.c
index b44f80e93b27..6b740a712943 100644
--- a/drivers/staging/qlge/qlge_dbg.c
+++ b/drivers/staging/qlge/qlge_dbg.c
@@ -610,7 +610,6 @@ static void ql_get_mac_protocol_registers(struct ql_adapter *qdev, u32 *buf)

for (type = 0; type < MAC_ADDR_TYPE_COUNT; type++) {
switch (type) {
-
case 0: /* CAM */
initial_val |= MAC_ADDR_ADR;
max_index = MAC_ADDR_MAX_CAM_ENTRIES;
diff --git a/drivers/staging/qlge/qlge_main.c b/drivers/staging/qlge/qlge_main.c
index 1a5b82b68b44..f5cc235e9854 100644
--- a/drivers/staging/qlge/qlge_main.c
+++ b/drivers/staging/qlge/qlge_main.c
@@ -2119,7 +2119,6 @@ static int ql_clean_outbound_rx_ring(struct rx_ring *rx_ring)
struct tx_ring *tx_ring;
/* While there are entries in the completion queue. */
while (prod != rx_ring->cnsmr_idx) {
-
netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
"cq_id = %d, prod = %d, cnsmr = %d\n",
rx_ring->cq_id, prod, rx_ring->cnsmr_idx);
@@ -2127,7 +2126,6 @@ static int ql_clean_outbound_rx_ring(struct rx_ring *rx_ring)
net_rsp = (struct ob_mac_iocb_rsp *)rx_ring->curr_entry;
rmb();
switch (net_rsp->opcode) {
-
case OPCODE_OB_MAC_TSO_IOCB:
case OPCODE_OB_MAC_IOCB:
ql_process_mac_tx_intr(qdev, net_rsp);
@@ -2166,7 +2164,6 @@ static int ql_clean_inbound_rx_ring(struct rx_ring *rx_ring, int budget)

/* While there are entries in the completion queue. */
while (prod != rx_ring->cnsmr_idx) {
-
netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
"cq_id = %d, prod = %d, cnsmr = %d\n",
rx_ring->cq_id, prod, rx_ring->cnsmr_idx);
@@ -2479,7 +2476,6 @@ static irqreturn_t qlge_isr(int irq, void *dev_id)

static int ql_tso(struct sk_buff *skb, struct ob_mac_tso_iocb_req *mac_iocb_ptr)
{
-
if (skb_is_gso(skb)) {
int err;
__be16 l3_proto = vlan_get_protocol(skb);
@@ -2886,7 +2882,6 @@ static void ql_free_rx_resources(struct ql_adapter *qdev,
static int ql_alloc_rx_resources(struct ql_adapter *qdev,
struct rx_ring *rx_ring)
{
-
/*
* Allocate the completion queue for this rx_ring.
*/
@@ -3815,7 +3810,6 @@ static int ql_wol(struct ql_adapter *qdev)

static void ql_cancel_all_work_sync(struct ql_adapter *qdev)
{
-
/* Don't kill the reset worker thread if we
* are in the process of recovery.
*/
diff --git a/drivers/staging/qlge/qlge_mpi.c b/drivers/staging/qlge/qlge_mpi.c
index 0f9bd9a8b523..4f8365cf2092 100644
--- a/drivers/staging/qlge/qlge_mpi.c
+++ b/drivers/staging/qlge/qlge_mpi.c
@@ -360,7 +360,6 @@ static int ql_aen_lost(struct ql_adapter *qdev, struct mbox_params *mbcp)
for (i = 0; i < mbcp->out_count; i++)
netif_err(qdev, drv, qdev->ndev, "mbox_out[%d] = 0x%.08x.\n",
i, mbcp->mbox_out[i]);
-
}
return status;
}
@@ -407,7 +406,6 @@ static int ql_mpi_handler(struct ql_adapter *qdev, struct mbox_params *mbcp)
}

switch (mbcp->mbox_out[0]) {
-
/* This case is only active when we arrive here
* as a result of issuing a mailbox command to
* the firmware.
--
2.20.1