Re: [ v2] hwmon: (pmbus) Add Wistron power supply pmbus driver

From: Guenter Roeck
Date: Sun Dec 08 2019 - 10:34:13 EST


On 12/8/19 5:44 AM, Ben Pai wrote:
Add the driver to monitor Wisreon power supplies with hwmon over pmbus.

s/Wisreon/Winston/, as per my comments to v1.

Signed-off-by: Ben Pai <Ben_Pai@xxxxxxxxxxx>
---

Change log goes here.

.../devicetree/bindings/hwmon/wistron-wps.txt | 30 +++
drivers/hwmon/pmbus/Kconfig | 9 +
drivers/hwmon/pmbus/Makefile | 1 +
drivers/hwmon/pmbus/wistron-wps.c | 176 ++++++++++++++++++
4 files changed, 216 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/wistron-wps.txt
create mode 100644 drivers/hwmon/pmbus/wistron-wps.c

diff --git a/Documentation/devicetree/bindings/hwmon/wistron-wps.txt b/Documentation/devicetree/bindings/hwmon/wistron-wps.txt
new file mode 100644
index 000000000000..aacb2e66736e
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/wistron-wps.txt

This is not a bindings document. It needs to be moved to Documentation/hwmon/

Note that the "w" in -wps seems redundant. The expanded text would read
"Wistron Wistron Common Form Factor power supply".

@@ -0,0 +1,30 @@
+ver ibm-cffps
+=======================
+
+Supported chips:
+
+ * Wistron Common Form Factor power supply(wps).
+
+Author: Ben Pai <Ben_Pai@xxxxxxxxxxx>
+
+Description
+-----------
+
+Our company name is Wistron, so this driver is written to supports
+Wistron Common Form Factor power supplies(wps). This driver

"This driver supports Wistron Common Form Factor power supplies"
is sufficient. "Our company name is" does not any value here;
the company name is implied in the context.

+is a client to the core PMBus driver. Read information from psu,
+and create debug-files and write information to them via driver.
+
This is a documentation of the resulting functionality. As pmbus client
driver, it also provides a number of hardware monitoring sysfs entries.

+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices for
+details.
+
+Information of the data read
+---------------------
+FRU : name of psu manufacturer.
+PN : part_number of psu.
+SN : serial_number of psu.
+mfr_date : Date of psu's manufacture.

Please explain that this information is provided via debugfs. You should also
list the supported sysfs attributes.

diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index d62d69bb7e49..ebb7024e58ab 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -219,6 +219,15 @@ config SENSORS_UCD9200
This driver can also be built as a module. If so, the module will
be called ucd9200.
+config SENSORS_WISTRON_WPS
+ tristate "Wistron Power Supply"
+ help
+ If you say yes here you get hardware monitoring support for the Wistron
+ power supply.
+
+ This driver can also be built as a module. If so, the module will
+ be called wistron-wps.
+
config SENSORS_ZL6100
tristate "Intersil ZL6100 and compatibles"
help
diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
index 03bacfcfd660..cad38f99e8c5 100644
--- a/drivers/hwmon/pmbus/Makefile
+++ b/drivers/hwmon/pmbus/Makefile
@@ -25,4 +25,5 @@ obj-$(CONFIG_SENSORS_TPS40422) += tps40422.o
obj-$(CONFIG_SENSORS_TPS53679) += tps53679.o
obj-$(CONFIG_SENSORS_UCD9000) += ucd9000.o
obj-$(CONFIG_SENSORS_UCD9200) += ucd9200.o
+obj-$(CONFIG_SENSORS_WISTRON_WPS) += wistron-wps.o
obj-$(CONFIG_SENSORS_ZL6100) += zl6100.o
diff --git a/drivers/hwmon/pmbus/wistron-wps.c b/drivers/hwmon/pmbus/wistron-wps.c
new file mode 100644
index 000000000000..4e2649e7b3f2
--- /dev/null
+++ b/drivers/hwmon/pmbus/wistron-wps.c
@@ -0,0 +1,176 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2019 Wistron Corp.
+ */
+
+#include <linux/bitops.h>

I don't see any bit operations used below.

+#include <linux/debugfs.h>
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/pmbus.h>
+
+#include "pmbus.h"
+
+#define WPS_FRU_CMD 0x99
+#define WPS_PN_CMD 0x9A
+#define WPS_FW_CMD 0x9B
+#define WPS_DATE_CMD 0x9D
+#define WPS_SN_CMD 0x9E
+
+enum {
+ WPS_DEBUGFS_FRU,
+ WPS_DEBUGFS_PN,
+ WPS_DEBUGFS_SN,
+ WPS_DEBUGFS_FW,
+ WPS_DEBUGFS_DATE,
+ WPS_DEBUGFS_NUM_ENTRIES
+};
+
+struct wistron_wps {
+ struct i2c_client *client;
+ int debugfs_entries[WPS_DEBUGFS_NUM_ENTRIES];
+};
+
+#define to_psu(x, y) container_of(x, struct wistron_wps, debugfs_entries[y])
+
+static ssize_t wistron_wps_debugfs_op(struct file *file, char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ u8 cmd;
+ int rc;
+ int *idxp = file->private_data;
+ int idx = *idxp;
+ struct wistron_wps *psu = to_psu(idxp, idx);
+ char data[I2C_SMBUS_BLOCK_MAX] = { 0 };
+
+ pmbus_set_page(psu->client, 0);

The chip has only one page. Why set page 0 ? If this is needed,
it needs to be explained in a comment.

+ switch (idx) {
+ case WPS_DEBUGFS_FRU:
+ cmd = WPS_FRU_CMD;
+ break;
+ case WPS_DEBUGFS_PN:
+ cmd = WPS_PN_CMD;
+ break;
+ case WPS_DEBUGFS_SN:
+ cmd = WPS_SN_CMD;
+ break;
+ case WPS_DEBUGFS_FW:
+ cmd = WPS_FW_CMD;
+ break;
+ case WPS_DEBUGFS_DATE:
+ cmd = WPS_DATE_CMD;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ rc = i2c_smbus_read_block_data(psu->client, cmd, data);
+ if (rc < 0)
+ return rc;
+
+done:
+ data[rc] = '\n';
+ rc += 2;

The device can, per protocol, return up to I2C_SMBUS_BLOCK_MAX bytes. If it does,
the write into data[rc] will be beyond the end of the buffer, and the call
below will read data beyond the end of the buffer, You will need to increase
the buffer size by 2 for this to work. You can not rely on the assumption that
the device never returns that much data.

There is also still no explanation why the trailing '\0' is sent to userspace.

For the record, I did mention all that in my comments to v1.

+
+ return simple_read_from_buffer(buf, count, ppos, data, rc);
+}
+
+static const struct file_operations wistron_wps_fops = {
+
+ .llseek = noop_llseek,
+ .read = wistron_wps_debugfs_op,
+ .open = simple_open,
+};
+
+static struct pmbus_driver_info wistron_wps_info = {
+ .pages = 1,
+ .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT |
+ PMBUS_HAVE_PIN | PMBUS_HAVE_POUT | PMBUS_HAVE_FAN12 |
+ PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_TEMP3 |
+ PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT |
+ PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_STATUS_TEMP |
+ PMBUS_HAVE_STATUS_FAN12,
+};
+
+static struct pmbus_platform_data wistron_wps_pdata = {
+ .flags = PMBUS_SKIP_STATUS_CHECK,
+};

As already mentioned in my comments to v1, this needs a comment explaining
the reason.

+
+static int wistron_wps_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int i, rc;
+ struct dentry *debugfs;
+ struct dentry *wistron_wps_dir;
+ struct wistron_wps *psu;
+
+ client->dev.platform_data = &wistron_wps_pdata;
+ rc = pmbus_do_probe(client, id, &wistron_wps_info);
+ if (rc)
+ return rc;
+
+ psu = devm_kzalloc(&client->dev, sizeof(*psu), GFP_KERNEL);
+ if (!psu)
+ return 0;
+
+ psu->client = client;
+
+ debugfs = pmbus_get_debugfs_dir(client);
+ if (!debugfs)
+ return 0;
+
+ wistron_wps_dir = debugfs_create_dir(client->name, debugfs);
+ if (!wistron_wps_dir)
+ return 0;
+
+ for (i = 0; i < WPS_DEBUGFS_NUM_ENTRIES; ++i)
+ psu->debugfs_entries[i] = i;
+
+ debugfs_create_file("fru", 0444, wistron_wps_dir,
+ &psu->debugfs_entries[WPS_DEBUGFS_FRU],
+ &wistron_wps_fops);
+ debugfs_create_file("part_number", 0444, wistron_wps_dir,
+ &psu->debugfs_entries[WPS_DEBUGFS_PN],
+ &wistron_wps_fops);
+ debugfs_create_file("serial_number", 0444, wistron_wps_dir,
+ &psu->debugfs_entries[WPS_DEBUGFS_SN],
+ &wistron_wps_fops);
+ debugfs_create_file("fw_version", 0444, wistron_wps_dir,
+ &psu->debugfs_entries[WPS_DEBUGFS_FW],
+ &wistron_wps_fops);
+ debugfs_create_file("mfr_date", 0444, wistron_wps_dir,
+ &psu->debugfs_entries[WPS_DEBUGFS_DATE],
+ &wistron_wps_fops);
+
+ return 0;
+}
+
+static const struct i2c_device_id wistron_wps_id[] = {
+ { "wistron_wps", 1 },
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, wistron_wps_id);
+
+static const struct of_device_id wistron_wps_of_match[] = {
+ { .compatible = "wistron, wps" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, wistron_wps_of_match);
+
+static struct i2c_driver wistron_wps_driver = {
+ .driver = {
+ .name = "wistron-wps",
+ .of_match_table = wistron_wps_of_match,
+ },
+ .probe = wistron_wps_probe,
+ .remove = pmbus_do_remove,
+ .id_table = wistron_wps_id,
+};
+
+module_i2c_driver(wistron_wps_driver);
+
+MODULE_AUTHOR("Ben Pai");
+MODULE_DESCRIPTION("PMBus driver for Wistron power supplies");
+MODULE_LICENSE("GPL");