[PATCH 4.14 062/209] serial: 8250: Rate limit serial port rx interrupts during input overruns

From: Greg Kroah-Hartman
Date: Wed Dec 04 2019 - 13:03:28 EST


From: Darwin Dingel <darwin.dingel@xxxxxxxxxxxxxxxxxxx>

[ Upstream commit 6d7f677a2afa1c82d7fc7af7f9159cbffd5dc010 ]

When a serial port gets faulty or gets flooded with inputs, its interrupt
handler starts to work double time to get the characters to the workqueue
for the tty layer to handle them. When this busy time on the serial/tty
subsystem happens during boot, where it is also busy on the userspace
trying to initialise, some processes can continuously get preempted
and will be on hold until the interrupts subside.

The fix is to backoff on processing received characters for a specified
amount of time when an input overrun is seen (received a new character
before the previous one is processed). This only stops receive and will
continue to transmit characters to serial port. After the backoff period
is done, it receive will be re-enabled. This is optional and will only
be enabled by setting 'overrun-throttle-ms' in the dts.

Signed-off-by: Darwin Dingel <darwin.dingel@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/tty/serial/8250/8250_core.c | 25 +++++++++++++++++++++++++
drivers/tty/serial/8250/8250_fsl.c | 23 ++++++++++++++++++++++-
drivers/tty/serial/8250/8250_of.c | 5 +++++
include/linux/serial_8250.h | 4 ++++
4 files changed, 56 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index d29b512a7d9fa..ceeea4b159c4b 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -953,6 +953,21 @@ static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port *
return NULL;
}

+static void serial_8250_overrun_backoff_work(struct work_struct *work)
+{
+ struct uart_8250_port *up =
+ container_of(to_delayed_work(work), struct uart_8250_port,
+ overrun_backoff);
+ struct uart_port *port = &up->port;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+ up->ier |= UART_IER_RLSI | UART_IER_RDI;
+ up->port.read_status_mask |= UART_LSR_DR;
+ serial_out(up, UART_IER, up->ier);
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
/**
* serial8250_register_8250_port - register a serial port
* @up: serial port template
@@ -1063,6 +1078,16 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
ret = 0;
}
}
+
+ /* Initialise interrupt backoff work if required */
+ if (up->overrun_backoff_time_ms > 0) {
+ uart->overrun_backoff_time_ms = up->overrun_backoff_time_ms;
+ INIT_DELAYED_WORK(&uart->overrun_backoff,
+ serial_8250_overrun_backoff_work);
+ } else {
+ uart->overrun_backoff_time_ms = 0;
+ }
+
mutex_unlock(&serial_mutex);

return ret;
diff --git a/drivers/tty/serial/8250/8250_fsl.c b/drivers/tty/serial/8250/8250_fsl.c
index 910bfee5a88b7..cc138c24ae889 100644
--- a/drivers/tty/serial/8250/8250_fsl.c
+++ b/drivers/tty/serial/8250/8250_fsl.c
@@ -48,8 +48,29 @@ int fsl8250_handle_irq(struct uart_port *port)

lsr = orig_lsr = up->port.serial_in(&up->port, UART_LSR);

- if (lsr & (UART_LSR_DR | UART_LSR_BI))
+ /* Process incoming characters first */
+ if ((lsr & (UART_LSR_DR | UART_LSR_BI)) &&
+ (up->ier & (UART_IER_RLSI | UART_IER_RDI))) {
lsr = serial8250_rx_chars(up, lsr);
+ }
+
+ /* Stop processing interrupts on input overrun */
+ if ((orig_lsr & UART_LSR_OE) && (up->overrun_backoff_time_ms > 0)) {
+ unsigned long delay;
+
+ up->ier = port->serial_in(port, UART_IER);
+ if (up->ier & (UART_IER_RLSI | UART_IER_RDI)) {
+ port->ops->stop_rx(port);
+ } else {
+ /* Keep restarting the timer until
+ * the input overrun subsides.
+ */
+ cancel_delayed_work(&up->overrun_backoff);
+ }
+
+ delay = msecs_to_jiffies(up->overrun_backoff_time_ms);
+ schedule_delayed_work(&up->overrun_backoff, delay);
+ }

serial8250_modem_status(up);

diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c
index ec510e342e06c..c51044ba503c3 100644
--- a/drivers/tty/serial/8250/8250_of.c
+++ b/drivers/tty/serial/8250/8250_of.c
@@ -232,6 +232,11 @@ static int of_platform_serial_probe(struct platform_device *ofdev)
if (of_property_read_bool(ofdev->dev.of_node, "auto-flow-control"))
port8250.capabilities |= UART_CAP_AFE;

+ if (of_property_read_u32(ofdev->dev.of_node,
+ "overrun-throttle-ms",
+ &port8250.overrun_backoff_time_ms) != 0)
+ port8250.overrun_backoff_time_ms = 0;
+
ret = serial8250_register_8250_port(&port8250);
if (ret < 0)
goto err_dispose;
diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
index a27ef5f564317..791a6be0e3949 100644
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -134,6 +134,10 @@ struct uart_8250_port {
void (*dl_write)(struct uart_8250_port *, int);

struct uart_8250_em485 *em485;
+
+ /* Serial port overrun backoff */
+ struct delayed_work overrun_backoff;
+ u32 overrun_backoff_time_ms;
};

static inline struct uart_8250_port *up_to_u8250p(struct uart_port *up)
--
2.20.1