Re: [PATCH 2/2] gpio: bcm-kona: use platform_irq_count

From: Uwe Kleine-König
Date: Tue Dec 03 2019 - 02:38:49 EST


On Tue, Dec 03, 2019 at 07:23:14AM +0000, Peng Fan wrote:
> > Subject: Re: [PATCH 2/2] gpio: bcm-kona: use platform_irq_count
> >
> > On Tue, Dec 03, 2019 at 07:00:40AM +0000, Peng Fan wrote:
> > > > Subject: Re: [PATCH 2/2] gpio: bcm-kona: use platform_irq_count
> > > >
> > > > On Tue, Dec 03, 2019 at 06:04:27AM +0000, Peng Fan wrote:
> > > > > From: Peng Fan <peng.fan@xxxxxxx>
> > > > >
> > > > > Use platform_irq_count to replace of_irq_count
> > > > >
> > > > > Signed-off-by: Peng Fan <peng.fan@xxxxxxx>
> > > > > ---
> > > > >
> > > > > V1:
> > > > > Code inspection, not tested
> > > > >
> > > > > drivers/gpio/gpio-bcm-kona.c | 3 +--
> > > > > 1 file changed, 1 insertion(+), 2 deletions(-)
> > > > >
> > > > > diff --git a/drivers/gpio/gpio-bcm-kona.c
> > > > > b/drivers/gpio/gpio-bcm-kona.c index 4122683eb1f9..c50721980a7c
> > > > 100644
> > > > > --- a/drivers/gpio/gpio-bcm-kona.c
> > > > > +++ b/drivers/gpio/gpio-bcm-kona.c
> > > > > @@ -19,7 +19,6 @@
> > > > > #include <linux/io.h>
> > > > > #include <linux/gpio/driver.h>
> > > > > #include <linux/of_device.h>
> > > > > -#include <linux/of_irq.h>
> > > > > #include <linux/init.h>
> > > > > #include <linux/irqdomain.h>
> > > > > #include <linux/irqchip/chained_irq.h> @@ -586,7 +585,7 @@ static
> > > > > int bcm_kona_gpio_probe(struct platform_device *pdev)
> > > > >
> > > > > kona_gpio->gpio_chip = template_chip;
> > > > > chip = &kona_gpio->gpio_chip;
> > > > > - kona_gpio->num_bank = of_irq_count(dev->of_node);
> > > > > + kona_gpio->num_bank = platform_irq_count(pdev);
> > > >
> > > > of_irq_count returns 0 or a positive int while platform_irq_count
> > > > might return a negative error code. This needs handling. Also I
> > > > wonder why
> > > > platform_irq_count() is better than of_irq_count() which would be
> > > > good to describe in the commit log.
> > >
> > > Inspired from
> > > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flkml
> > > .org%2Flkml%2F2015%2F11%2F18%2F466&amp;data=02%7C01%7Cpeng.f
> > an%40nxp.c
> > >
> > om%7C46364bf12479463df7d308d777c09b39%7C686ea1d3bc2b4c6fa92cd9
> > 9c5c3016
> > >
> > 35%7C0%7C0%7C637109541440912984&amp;sdata=awTvwwmo4692Hx7IJ
> > H%2BllEVJH7
> > > ngINufoMH8UsosU%2BA%3D&amp;reserved=0
> > > From Rob:
> > > "
> > > So I started looking at why you are using of_irq_count which drivers
> > > shouldn't need to. In patch 5 you use it to allocate memory to store
> > > the irq names, then use them here...
> > > "
> > >
> > > Is this ok?
> >
> > I would say something like:
> >
> > platform_irq_count() is the more generic way (independent of
> > device trees) to determine the count of available interrupts. So
> > use this instead.
> >
> > As platform_irq_count() might return an error code (which
> > of_irq_count doesn't) some additional handling is necessary.
>
> Thanks, how about this change?
> @@ -586,11 +585,15 @@ static int bcm_kona_gpio_probe(struct platform_device *pdev)
>
> kona_gpio->gpio_chip = template_chip;
> chip = &kona_gpio->gpio_chip;
> - kona_gpio->num_bank = of_irq_count(dev->of_node);
> - if (kona_gpio->num_bank == 0) {
> + ret = platform_irq_count(pdev);
> + if (!ret) {
> dev_err(dev, "Couldn't determine # GPIO banks\n");
> return -ENOENT;
> + } else if (ret < 0) {
> + return ret;

This is inconsitent. In the ret==0 case you emit an error message, in
the ret < 0 case you don't. I think the sensible approach would be to
do:

if (ret == 0) {
dev_err(dev, "Couldn't determine # GPIO banks\n");
return -ENOENT;
} else if (ret < 0) {
if (ret != -EPROBE_DEFER)
dev_err(dev, "Failed to determine count of GPIO banks (%pe)\n", ERR_PTR(ret));
return ret;
}

Best regards
Uwe

--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | https://www.pengutronix.de/ |