Re: [PATCH v3 0/7] add Amlogic A1 clock controller driver

[Jerome Brunet]

On Fri 29 Nov 2019 at 15:45, Jian Hu <jian.hu@xxxxxxxxxxx> wrote:

> add support for Amlogic A1 clock driver, the clock includes 
> three parts: peripheral clocks, pll clocks, CPU clocks.
> sys pll and CPU clocks will be sent in next patch.
>
> Changes since v1 at [2]:

v2 or v1 ??

> -add probe function for A1
> -seperate the clock driver into two patch
> -change some clock flags and ops
> -add support for a1 PLL ops
> -add A1 clock node
>
> Changes since v1 at [1]:
> -place A1 config alphabetically
> -add actual reason for RO ops, CLK_IS_CRITICAL, CLK_IGNORE_UNUSED
> -separate the driver into two driver: peripheral and pll driver
> -delete CLK_IGNORE_UNUSED flag for pwm b/c/d/e/f clock, dsp clock
> -delete the change in Kconfig.platforms, address to Kevin alone
> -remove the useless comments
> -modify the meson pll driver to support A1 PLLs
>
> [1] https://lkml.kernel.org/r/1569411888-98116-1-git-send-email-jian.hu@xxxxxxxxxxx
> [2] https://lkml.kernel.org/r/1571382865-41978-1-git-send-email-jian.hu@xxxxxxxxxxx
>
> Jian Hu (7):
>   dt-bindings: clock: meson: add A1 PLL clock controller bindings
>   clk: meson: add support for A1 PLL clock ops
>   clk: meson: eeclk: refactor eeclk common driver to support A1
>   clk: meson: a1: add support for Amlogic A1 PLL clock driver
>   dt-bindings: clock: meson: add A1 peripheral clock controller bindings
>   clk: meson: a1: add support for Amlogic A1 Peripheral clock driver
>   arm64: dts: meson: add A1 PLL and periphs clock controller

The arm64 is for the DT maintainer. Please send it separately after this
series is applied (if it gets applied)

> Please fix the underlying issue, then you can post your series again.

This was a comment on your v2. Did you fix the orphan/ordering issue ?
If you did, you probably should mention it here.
If you did not, I'm probably not going to review this further until you do.

>
>  .../bindings/clock/amlogic,a1-clkc.yaml       |   70 +
>  .../bindings/clock/amlogic,a1-pll-clkc.yaml   |   56 +
>  arch/arm64/boot/dts/amlogic/meson-a1.dtsi     |   26 +
>  drivers/clk/meson/Kconfig                     |   20 +
>  drivers/clk/meson/Makefile                    |    2 +
>  drivers/clk/meson/a1-pll.c                    |  334 +++
>  drivers/clk/meson/a1-pll.h                    |   56 +
>  drivers/clk/meson/a1.c                        | 2309 +++++++++++++++++
>  drivers/clk/meson/a1.h                        |  120 +
>  drivers/clk/meson/clk-pll.c                   |   21 +
>  drivers/clk/meson/clk-pll.h                   |    1 +
>  drivers/clk/meson/meson-eeclk.c               |   59 +-
>  drivers/clk/meson/meson-eeclk.h               |    2 +
>  drivers/clk/meson/parm.h                      |    1 +
>  include/dt-bindings/clock/a1-clkc.h           |   98 +
>  include/dt-bindings/clock/a1-pll-clkc.h       |   16 +
>  16 files changed, 3181 insertions(+), 10 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/clock/amlogic,a1-clkc.yaml
>  create mode 100644 Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml
>  create mode 100644 drivers/clk/meson/a1-pll.c
>  create mode 100644 drivers/clk/meson/a1-pll.h
>  create mode 100644 drivers/clk/meson/a1.c
>  create mode 100644 drivers/clk/meson/a1.h
>  create mode 100644 include/dt-bindings/clock/a1-clkc.h
>  create mode 100644 include/dt-bindings/clock/a1-pll-clkc.h