[PATCH v3 02/10] clk: clock-wizard: Move the clockwizard to clk

From: shubhrajyoti . datta
Date: Thu Nov 28 2019 - 01:37:01 EST


From: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx>

Move the clocking wizard driver from staging to clk.

Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx>
---
drivers/clk/Kconfig | 6 +
drivers/clk/Makefile | 1 +
drivers/clk/clk-xlnx-clock-wizard.c | 335 ++++++++++++++++++++++++++++++++++++
3 files changed, 342 insertions(+)
create mode 100644 drivers/clk/clk-xlnx-clock-wizard.c

diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index c44247d..ff7d0f6 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -305,6 +305,12 @@ config COMMON_CLK_FIXED_MMIO
help
Support for Memory Mapped IO Fixed clocks

+config COMMON_CLK_XLNX_CLKWZRD
+ tristate "Xilinx Clocking Wizard"
+ depends on COMMON_CLK && OF
+ help
+ Support for the Xilinx Clocking Wizard IP core clock generator.
+
source "drivers/clk/actions/Kconfig"
source "drivers/clk/analogbits/Kconfig"
source "drivers/clk/bcm/Kconfig"
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 0138fb1..bce022f 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -65,6 +65,7 @@ obj-$(CONFIG_ARCH_VT8500) += clk-vt8500.o
obj-$(CONFIG_COMMON_CLK_VC5) += clk-versaclock5.o
obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o
obj-$(CONFIG_COMMON_CLK_XGENE) += clk-xgene.o
+obj-$(CONFIG_COMMON_CLK_XLNX_CLKWZRD) += clk-xlnx-clock-wizard.o

# please keep this section sorted lexicographically by directory path name
obj-y += actions/
diff --git a/drivers/clk/clk-xlnx-clock-wizard.c b/drivers/clk/clk-xlnx-clock-wizard.c
new file mode 100644
index 0000000..15b7a82
--- /dev/null
+++ b/drivers/clk/clk-xlnx-clock-wizard.c
@@ -0,0 +1,335 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Xilinx 'Clocking Wizard' driver
+ *
+ * Copyright (C) 2013 - 2014 Xilinx
+ *
+ * SÃren Brinkmann <soren.brinkmann@xxxxxxxxxx>
+ */
+
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/module.h>
+#include <linux/err.h>
+
+#define WZRD_NUM_OUTPUTS 7
+#define WZRD_ACLK_MAX_FREQ 250000000UL
+
+#define WZRD_CLK_CFG_REG(n) (0x200 + 4 * (n))
+
+#define WZRD_CLKOUT0_FRAC_EN BIT(18)
+#define WZRD_CLKFBOUT_FRAC_EN BIT(26)
+
+#define WZRD_CLKFBOUT_MULT_SHIFT 8
+#define WZRD_CLKFBOUT_MULT_MASK (0xff << WZRD_CLKFBOUT_MULT_SHIFT)
+#define WZRD_DIVCLK_DIVIDE_SHIFT 0
+#define WZRD_DIVCLK_DIVIDE_MASK (0xff << WZRD_DIVCLK_DIVIDE_SHIFT)
+#define WZRD_CLKOUT_DIVIDE_SHIFT 0
+#define WZRD_CLKOUT_DIVIDE_MASK (0xff << WZRD_DIVCLK_DIVIDE_SHIFT)
+
+enum clk_wzrd_int_clks {
+ wzrd_clk_mul,
+ wzrd_clk_mul_div,
+ wzrd_clk_int_max
+};
+
+/**
+ * struct clk_wzrd:
+ * @clk_data: Clock data
+ * @nb: Notifier block
+ * @base: Memory base
+ * @clk_in1: Handle to input clock 'clk_in1'
+ * @axi_clk: Handle to input clock 's_axi_aclk'
+ * @clks_internal: Internal clocks
+ * @clkout: Output clocks
+ * @speed_grade: Speed grade of the device
+ * @suspended: Flag indicating power state of the device
+ */
+struct clk_wzrd {
+ struct clk_onecell_data clk_data;
+ struct notifier_block nb;
+ void __iomem *base;
+ struct clk *clk_in1;
+ struct clk *axi_clk;
+ struct clk *clks_internal[wzrd_clk_int_max];
+ struct clk *clkout[WZRD_NUM_OUTPUTS];
+ unsigned int speed_grade;
+ bool suspended;
+};
+
+#define to_clk_wzrd(_nb) container_of(_nb, struct clk_wzrd, nb)
+
+/* maximum frequencies for input/output clocks per speed grade */
+static const unsigned long clk_wzrd_max_freq[] = {
+ 800000000UL,
+ 933000000UL,
+ 1066000000UL
+};
+
+static int clk_wzrd_clk_notifier(struct notifier_block *nb, unsigned long event,
+ void *data)
+{
+ unsigned long max;
+ struct clk_notifier_data *ndata = data;
+ struct clk_wzrd *clk_wzrd = to_clk_wzrd(nb);
+
+ if (clk_wzrd->suspended)
+ return NOTIFY_OK;
+
+ if (ndata->clk == clk_wzrd->clk_in1)
+ max = clk_wzrd_max_freq[clk_wzrd->speed_grade - 1];
+ else if (ndata->clk == clk_wzrd->axi_clk)
+ max = WZRD_ACLK_MAX_FREQ;
+ else
+ return NOTIFY_DONE; /* should never happen */
+
+ switch (event) {
+ case PRE_RATE_CHANGE:
+ if (ndata->new_rate > max)
+ return NOTIFY_BAD;
+ return NOTIFY_OK;
+ case POST_RATE_CHANGE:
+ case ABORT_RATE_CHANGE:
+ default:
+ return NOTIFY_DONE;
+ }
+}
+
+static int __maybe_unused clk_wzrd_suspend(struct device *dev)
+{
+ struct clk_wzrd *clk_wzrd = dev_get_drvdata(dev);
+
+ clk_disable_unprepare(clk_wzrd->axi_clk);
+ clk_wzrd->suspended = true;
+
+ return 0;
+}
+
+static int __maybe_unused clk_wzrd_resume(struct device *dev)
+{
+ int ret;
+ struct clk_wzrd *clk_wzrd = dev_get_drvdata(dev);
+
+ ret = clk_prepare_enable(clk_wzrd->axi_clk);
+ if (ret) {
+ dev_err(dev, "unable to enable s_axi_aclk\n");
+ return ret;
+ }
+
+ clk_wzrd->suspended = false;
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(clk_wzrd_dev_pm_ops, clk_wzrd_suspend,
+ clk_wzrd_resume);
+
+static int clk_wzrd_probe(struct platform_device *pdev)
+{
+ int i, ret;
+ u32 reg;
+ unsigned long rate;
+ const char *clk_name;
+ struct clk_wzrd *clk_wzrd;
+ struct resource *mem;
+ struct device_node *np = pdev->dev.of_node;
+
+ clk_wzrd = devm_kzalloc(&pdev->dev, sizeof(*clk_wzrd), GFP_KERNEL);
+ if (!clk_wzrd)
+ return -ENOMEM;
+ platform_set_drvdata(pdev, clk_wzrd);
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ clk_wzrd->base = devm_ioremap_resource(&pdev->dev, mem);
+ if (IS_ERR(clk_wzrd->base))
+ return PTR_ERR(clk_wzrd->base);
+
+ ret = of_property_read_u32(np, "speed-grade", &clk_wzrd->speed_grade);
+ if (!ret) {
+ if (clk_wzrd->speed_grade < 1 || clk_wzrd->speed_grade > 3) {
+ dev_warn(&pdev->dev, "invalid speed grade '%d'\n",
+ clk_wzrd->speed_grade);
+ clk_wzrd->speed_grade = 0;
+ }
+ }
+
+ clk_wzrd->clk_in1 = devm_clk_get(&pdev->dev, "clk_in1");
+ if (IS_ERR(clk_wzrd->clk_in1)) {
+ if (clk_wzrd->clk_in1 != ERR_PTR(-EPROBE_DEFER))
+ dev_err(&pdev->dev, "clk_in1 not found\n");
+ return PTR_ERR(clk_wzrd->clk_in1);
+ }
+
+ clk_wzrd->axi_clk = devm_clk_get(&pdev->dev, "s_axi_aclk");
+ if (IS_ERR(clk_wzrd->axi_clk)) {
+ if (clk_wzrd->axi_clk != ERR_PTR(-EPROBE_DEFER))
+ dev_err(&pdev->dev, "s_axi_aclk not found\n");
+ return PTR_ERR(clk_wzrd->axi_clk);
+ }
+ ret = clk_prepare_enable(clk_wzrd->axi_clk);
+ if (ret) {
+ dev_err(&pdev->dev, "enabling s_axi_aclk failed\n");
+ return ret;
+ }
+ rate = clk_get_rate(clk_wzrd->axi_clk);
+ if (rate > WZRD_ACLK_MAX_FREQ) {
+ dev_err(&pdev->dev, "s_axi_aclk frequency (%lu) too high\n",
+ rate);
+ ret = -EINVAL;
+ goto err_disable_clk;
+ }
+
+ /* we don't support fractional div/mul yet */
+ reg = readl(clk_wzrd->base + WZRD_CLK_CFG_REG(0)) &
+ WZRD_CLKFBOUT_FRAC_EN;
+ reg |= readl(clk_wzrd->base + WZRD_CLK_CFG_REG(2)) &
+ WZRD_CLKOUT0_FRAC_EN;
+ if (reg)
+ dev_warn(&pdev->dev, "fractional div/mul not supported\n");
+
+ /* register multiplier */
+ reg = (readl(clk_wzrd->base + WZRD_CLK_CFG_REG(0)) &
+ WZRD_CLKFBOUT_MULT_MASK) >> WZRD_CLKFBOUT_MULT_SHIFT;
+ clk_name = kasprintf(GFP_KERNEL, "%s_mul", dev_name(&pdev->dev));
+ if (!clk_name) {
+ ret = -ENOMEM;
+ goto err_disable_clk;
+ }
+ clk_wzrd->clks_internal[wzrd_clk_mul] = clk_register_fixed_factor
+ (&pdev->dev, clk_name,
+ __clk_get_name(clk_wzrd->clk_in1),
+ 0, reg, 1);
+ kfree(clk_name);
+ if (IS_ERR(clk_wzrd->clks_internal[wzrd_clk_mul])) {
+ dev_err(&pdev->dev, "unable to register fixed-factor clock\n");
+ ret = PTR_ERR(clk_wzrd->clks_internal[wzrd_clk_mul]);
+ goto err_disable_clk;
+ }
+
+ /* register div */
+ reg = (readl(clk_wzrd->base + WZRD_CLK_CFG_REG(0)) &
+ WZRD_DIVCLK_DIVIDE_MASK) >> WZRD_DIVCLK_DIVIDE_SHIFT;
+ clk_name = kasprintf(GFP_KERNEL, "%s_mul_div", dev_name(&pdev->dev));
+ if (!clk_name) {
+ ret = -ENOMEM;
+ goto err_rm_int_clk;
+ }
+
+ clk_wzrd->clks_internal[wzrd_clk_mul_div] = clk_register_fixed_factor
+ (&pdev->dev, clk_name,
+ __clk_get_name(clk_wzrd->clks_internal[wzrd_clk_mul]),
+ 0, 1, reg);
+ if (IS_ERR(clk_wzrd->clks_internal[wzrd_clk_mul_div])) {
+ dev_err(&pdev->dev, "unable to register divider clock\n");
+ ret = PTR_ERR(clk_wzrd->clks_internal[wzrd_clk_mul_div]);
+ goto err_rm_int_clk;
+ }
+
+ /* register div per output */
+ for (i = WZRD_NUM_OUTPUTS - 1; i >= 0 ; i--) {
+ const char *clkout_name;
+
+ if (of_property_read_string_index(np, "clock-output-names", i,
+ &clkout_name)) {
+ dev_err(&pdev->dev,
+ "clock output name not specified\n");
+ ret = -EINVAL;
+ goto err_rm_int_clks;
+ }
+ reg = readl(clk_wzrd->base + WZRD_CLK_CFG_REG(2) + i * 12);
+ reg &= WZRD_CLKOUT_DIVIDE_MASK;
+ reg >>= WZRD_CLKOUT_DIVIDE_SHIFT;
+ clk_wzrd->clkout[i] = clk_register_fixed_factor
+ (&pdev->dev, clkout_name, clk_name, 0, 1, reg);
+ if (IS_ERR(clk_wzrd->clkout[i])) {
+ int j;
+
+ for (j = i + 1; j < WZRD_NUM_OUTPUTS; j++)
+ clk_unregister(clk_wzrd->clkout[j]);
+ dev_err(&pdev->dev,
+ "unable to register divider clock\n");
+ ret = PTR_ERR(clk_wzrd->clkout[i]);
+ goto err_rm_int_clks;
+ }
+ }
+
+ kfree(clk_name);
+
+ clk_wzrd->clk_data.clks = clk_wzrd->clkout;
+ clk_wzrd->clk_data.clk_num = ARRAY_SIZE(clk_wzrd->clkout);
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_wzrd->clk_data);
+
+ if (clk_wzrd->speed_grade) {
+ clk_wzrd->nb.notifier_call = clk_wzrd_clk_notifier;
+
+ ret = clk_notifier_register(clk_wzrd->clk_in1,
+ &clk_wzrd->nb);
+ if (ret)
+ dev_warn(&pdev->dev,
+ "unable to register clock notifier\n");
+
+ ret = clk_notifier_register(clk_wzrd->axi_clk, &clk_wzrd->nb);
+ if (ret)
+ dev_warn(&pdev->dev,
+ "unable to register clock notifier\n");
+ }
+
+ return 0;
+
+err_rm_int_clks:
+ clk_unregister(clk_wzrd->clks_internal[1]);
+err_rm_int_clk:
+ kfree(clk_name);
+ clk_unregister(clk_wzrd->clks_internal[0]);
+err_disable_clk:
+ clk_disable_unprepare(clk_wzrd->axi_clk);
+
+ return ret;
+}
+
+static int clk_wzrd_remove(struct platform_device *pdev)
+{
+ int i;
+ struct clk_wzrd *clk_wzrd = platform_get_drvdata(pdev);
+
+ of_clk_del_provider(pdev->dev.of_node);
+
+ for (i = 0; i < WZRD_NUM_OUTPUTS; i++)
+ clk_unregister(clk_wzrd->clkout[i]);
+ for (i = 0; i < wzrd_clk_int_max; i++)
+ clk_unregister(clk_wzrd->clks_internal[i]);
+
+ if (clk_wzrd->speed_grade) {
+ clk_notifier_unregister(clk_wzrd->axi_clk, &clk_wzrd->nb);
+ clk_notifier_unregister(clk_wzrd->clk_in1, &clk_wzrd->nb);
+ }
+
+ clk_disable_unprepare(clk_wzrd->axi_clk);
+
+ return 0;
+}
+
+static const struct of_device_id clk_wzrd_ids[] = {
+ { .compatible = "xlnx,clocking-wizard" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, clk_wzrd_ids);
+
+static struct platform_driver clk_wzrd_driver = {
+ .driver = {
+ .name = "clk-wizard",
+ .of_match_table = clk_wzrd_ids,
+ .pm = &clk_wzrd_dev_pm_ops,
+ },
+ .probe = clk_wzrd_probe,
+ .remove = clk_wzrd_remove,
+};
+module_platform_driver(clk_wzrd_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Soeren Brinkmann <soren.brinkmann@xxxxxxxxxx");
+MODULE_DESCRIPTION("Driver for the Xilinx Clocking Wizard IP core");
--
2.1.1