[PATCH v3 0/6] GPIO & Hierarchy IRQ support for HiFive Unleashed

From: Yash Shah
Date: Mon Nov 25 2019 - 00:58:07 EST


This patch series adds GPIO drivers, DT documentation and DT nodes for
HiFive Unleashed board. The gpio patches are mostly based on Wesley's patch.
The patchset also adds hierarchy irq domain support as it is required by this
gpio driver. It also includes the irqdomain patch to introduce
irq_domain_translate_onecell() and irq-nvic driver patch to use this newly
introduced function.

This patchset is based on Linux 5.4-rc6 and tested on HiFive Unleashed board

Changes:
v3 vs v2:
- Include patch for irq-nvic driver to use irq_domain_translate_onecell
- Remove unnecessary inclusion of header files
- Use a single prefix for all symbols in this driver
- Rename the "enabled" field of struct sifive_gpio to "irq_state"
- Remove unused variables and locking from probe()
- Other minor changes

v2 vs v1:
- Add patch to introduce irq_domain_translate_onecell() and use it in
the sifive PLIC driver
- Drop the usage of own locks, instead use internal bgpio_locks
- Consistently use regmap for register access throughout the gpio code
- Convert the GPIO DT documentation into a json schema
- Other minor changes based upon feedback received on v1

v1 vs RFC:
Incorporated below changes as suggested by Linus Walleij on RFC version of this
patchset[0]
- Dropped PWM patches as they are already merged.
- Include "GPIO_GENERIC" and "REGMAP_MMIO" in Kconfig select option
- Remove unwanted inclusion of header files
- Use regmap MMIO instead of customised sifive_assign_bit()
- Use GPIOLIB_GENERIC and bgpio_init() to set up the accessors
- Use hierarchical irqdomain

[0] https://lore.kernel.org/linux-riscv/20181010123519.RVexDppaPFpIWl7QU_hpP8tc5qqWPJgeuLYn0FaGbeQ@z/

Yash Shah (6):
genirq: introduce irq_domain_translate_onecell
irqchip: nvic: Use irq_domain_translate_onecell instead of custom func
irqchip: sifive: Support hierarchy irq domain
gpio: sifive: Add DT documentation for SiFive GPIO
gpio: sifive: Add GPIO driver for SiFive SoCs
riscv: dts: Add DT support for SiFive FU540 GPIO driver

.../devicetree/bindings/gpio/gpio-sifive.yaml | 69 ++++++
arch/riscv/boot/dts/sifive/fu540-c000.dtsi | 14 +-
.../riscv/boot/dts/sifive/hifive-unleashed-a00.dts | 4 +
drivers/gpio/Kconfig | 9 +
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-sifive.c | 252 +++++++++++++++++++++
drivers/irqchip/Kconfig | 1 +
drivers/irqchip/irq-nvic.c | 15 +-
drivers/irqchip/irq-sifive-plic.c | 30 ++-
include/linux/irqdomain.h | 5 +
kernel/irq/irqdomain.c | 17 ++
11 files changed, 399 insertions(+), 18 deletions(-)
create mode 100644 Documentation/devicetree/bindings/gpio/gpio-sifive.yaml
create mode 100644 drivers/gpio/gpio-sifive.c

--
2.7.4