Re: [PATCH v2] ARM: dts: aspeed: Adding Facebook Yosemite V2 BMC

From: Andrew Jeffery
Date: Sun Nov 24 2019 - 17:05:15 EST




On Fri, 22 Nov 2019, at 21:00, Manikandan wrote:
>
> From 9a17872b5faf2c00ab0b572bac0072e44a3d8b91 Mon Sep 17 00:00:00 2001
> From: manikandan-e <manikandan.hcl.ers.epl@xxxxxxxxx>
> Date: Thu, 21 Nov 2019 11:57:07 +0530
> Subject: [PATCH] ARM: dts: aspeed: Adding Facebook Yosemite V2 BMC
>
> The Yosemite V2 is a facebook multi-node server
> platform that host four OCP server. The BMC
> in the Yosemite V2 platorm based on AST2500 SoC.
>
> This patch adds linux device tree entry related to
> Yosemite V2 specific devices connected to BMC SoC.
>
> Signed-off-by: manikandan-e <manikandan.hcl.ers.epl@xxxxxxxxx>
> ---
> .../boot/dts/aspeed-bmc-facebook-yosemitev2.dts | 152 +++++++++++++++++++++
> 1 file changed, 152 insertions(+)
> create mode 100644 arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts
>
> diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts
> b/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts
> new file mode 100644
> index 0000000..5f9a2e1
> --- /dev/null
> +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts
> @@ -0,0 +1,152 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +// Copyright (c) 2018 Facebook Inc.
> +/dts-v1/;
> +
> +#include "aspeed-g5.dtsi"
> +#include <dt-bindings/gpio/aspeed-gpio.h>
> +
> +/ {
> + model = "Facebook Yosemitev2 BMC";
> + compatible = "facebook,yosemitev2-bmc", "aspeed,ast2500";
> + aliases {
> + serial0 = &uart1;

Is this necessary now that you're not enabling uart1?

But otherwise:

Acked-by: Andrew Jeffery <andrew@xxxxxxxx>

However, I'm guessing you copy/pasted the patch as we still have the
reply text at the bottom. Copy/paste can lead to mangled whitespace
or other errors that prevent the patch from being applied cleanly. I
recommend getting set up and familiar with `git send-email` to give
your patch the best chance of being applied without trouble. The
`git format-patch` / `git send-email` pair also take care of iterating
on your patch with e.g. the `-v` switch that injects the version number
of the patch in the appropriate places.

Andrew

> + serial4 = &uart5;
> + };
> + chosen {
> + stdout-path = &uart5;
> + bootargs = "console=ttyS4,115200 earlyprintk";
> + };
> +
> + memory@80000000 {
> + reg = <0x80000000 0x20000000>;
> + };
> +
> + iio-hwmon {
> + // VOLATAGE SENSOR
> + compatible = "iio-hwmon";
> + io-channels = <&adc 0> , <&adc 1> , <&adc 2> , <&adc 3> ,
> + <&adc 4> , <&adc 5> , <&adc 6> , <&adc 7> ,
> + <&adc 8> , <&adc 9> , <&adc 10>, <&adc 11> ,
> + <&adc 12> , <&adc 13> , <&adc 14> , <&adc 15> ;
> + };
> +};
> +
> +&fmc {
> + status = "okay";
> + flash@0 {
> + status = "okay";
> + m25p,fast-read;
> +#include "openbmc-flash-layout.dtsi"
> + };
> +};
> +
> +&spi1 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_spi1_default>;
> + flash@0 {
> + status = "okay";
> + m25p,fast-read;
> + label = "pnor";
> + };
> +};
> +
> +&uart5 {
> + // BMC Console
> + status = "okay";
> +};
> +
> +&mac0 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_rmii1_default>;
> + use-ncsi;
> +};
> +
> +&adc {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_adc0_default
> + &pinctrl_adc1_default
> + &pinctrl_adc2_default
> + &pinctrl_adc3_default
> + &pinctrl_adc4_default
> + &pinctrl_adc5_default
> + &pinctrl_adc6_default
> + &pinctrl_adc7_default
> + &pinctrl_adc8_default
> + &pinctrl_adc9_default
> + &pinctrl_adc10_default
> + &pinctrl_adc11_default
> + &pinctrl_adc12_default
> + &pinctrl_adc13_default
> + &pinctrl_adc14_default
> + &pinctrl_adc15_default>;
> +};
> +
> +&i2c8 {
> + status = "okay";
> + //FRU EEPROM
> + eeprom@51 {
> + compatible = "atmel,24c64";
> + reg = <0x51>;
> + pagesize = <32>;
> + };
> +};
> +
> +&i2c9 {
> + status = "okay";
> + tmp421@4e {
> + //INLET TEMP
> + compatible = "ti,tmp421";
> + reg = <0x4e>;
> + };
> + //OUTLET TEMP
> + tmp421@4f {
> + compatible = "ti,tmp421";
> + reg = <0x4f>;
> + };
> +};
> +
> +&i2c10 {
> + status = "okay";
> + //HSC
> + adm1278@40 {
> + compatible = "adi,adm1278";
> + reg = <0x40>;
> + };
> +};
> +
> +&i2c11 {
> + status = "okay";
> + //MEZZ_TEMP_SENSOR
> + tmp421@1f {
> + compatible = "ti,tmp421";
> + reg = <0x1f>;
> + };
> +};
> +
> +&i2c12 {
> + status = "okay";
> + //MEZZ_FRU
> + eeprom@51 {
> + compatible = "atmel,24c64";
> + reg = <0x51>;
> + pagesize = <32>;
> + };
> +};
> +
> +&pwm_tacho {
> + status = "okay";
> + //FSC
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
> + fan@0 {
> + reg = <0x00>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x00>;
> + };
> + fan@1 {
> + reg = <0x01>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x02>;
> + };
> +};
> --
> 2.7.4
>
>
> On Fri, Nov 22, 2019 at 09:16:39AM +1030, Andrew Jeffery wrote:
> >
> >
> > On Thu, 21 Nov 2019, at 18:18, Manikandan wrote:
> > >
> > > Hi Andrew/Vijay,
> > >
> > > Thanks for the review .
> > >
> > > The following changes done in dts and tested in Facebook Yosemite V2
> > > BMC platform,
> > > 1. LPC feature removed as not supported .
> > > 2. VUART feature removed as not supported.
> > > 3. Host UART feature removed as not in the current scope.
> > > 4. ADC pinctrl details added in dts.
> >
> > Can you please re-send the patch as a v2 and inline to the mail rather than
> > as an attachment?
> >
> > Cheers,
> >
> > Andrew
>