[PATCH v9 6/6] pwm: sun4i: Add support for H6 PWM

From: ClÃment PÃron
Date: Sun Nov 24 2019 - 12:30:23 EST


From: Jernej Skrabec <jernej.skrabec@xxxxxxxx>

Now that sun4i PWM driver supports deasserting reset line and enabling
bus clock, support for H6 PWM can be added.

Note that while H6 PWM has two channels, only first one is wired to
output pin. Second channel is used as a clock source to companion AC200
chip which is bundled into same package.

Signed-off-by: Jernej Skrabec <jernej.skrabec@xxxxxxxx>
Acked-by: Uwe Kleine-KÃnig <u.kleine-koenig@xxxxxxxxxxxxxx>
Signed-off-by: ClÃment PÃron <peron.clem@xxxxxxxxx>
---
drivers/pwm/pwm-sun4i.c | 9 +++++++++
1 file changed, 9 insertions(+)

diff --git a/drivers/pwm/pwm-sun4i.c b/drivers/pwm/pwm-sun4i.c
index 07bf7be6074b..c394878c7e5d 100644
--- a/drivers/pwm/pwm-sun4i.c
+++ b/drivers/pwm/pwm-sun4i.c
@@ -360,6 +360,12 @@ static const struct sun4i_pwm_data sun4i_pwm_single_bypass = {
.npwm = 1,
};

+static const struct sun4i_pwm_data sun50i_h6_pwm_data = {
+ .has_prescaler_bypass = true,
+ .has_direct_mod_clk_output = true,
+ .npwm = 2,
+};
+
static const struct of_device_id sun4i_pwm_dt_ids[] = {
{
.compatible = "allwinner,sun4i-a10-pwm",
@@ -376,6 +382,9 @@ static const struct of_device_id sun4i_pwm_dt_ids[] = {
}, {
.compatible = "allwinner,sun8i-h3-pwm",
.data = &sun4i_pwm_single_bypass,
+ }, {
+ .compatible = "allwinner,sun50i-h6-pwm",
+ .data = &sun50i_h6_pwm_data,
}, {
/* sentinel */
},
--
2.20.1