Re: [PATCH 01/16] remoteproc: q6v5-mss: fixup MSM8998 MSS out of reset sequence

From: Jeffrey Hugo
Date: Mon Nov 18 2019 - 16:55:07 EST


On Mon, Nov 18, 2019 at 2:43 PM Sibi Sankar <sibis@xxxxxxxxxxxxxx> wrote:
>
> Fixup the following in the MSS out of reset sequence on MSM8998:
> * skip ACC override on MSM8998.
> * wait for BHS_EN_REST_ACK to be set before setting the LDO to bypass.
> * remove "mem" clock from the active pool.

Why any of this is necessary isn't explained.
Seems like it should be 3 separate patches.
Regarding the mem clock change, wouldn't it be an issue if we don't
vote for that?

>
> Signed-off-by: Sibi Sankar <sibis@xxxxxxxxxxxxxx>
> ---
> drivers/remoteproc/qcom_q6v5_mss.c | 23 ++++++++++++++++++++---
> 1 file changed, 20 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
> index 471128a2e7239..2becf6dade936 100644
> --- a/drivers/remoteproc/qcom_q6v5_mss.c
> +++ b/drivers/remoteproc/qcom_q6v5_mss.c
> @@ -100,6 +100,11 @@
> #define QDSP6SS_XO_CBCR 0x0038
> #define QDSP6SS_ACC_OVERRIDE_VAL 0x20
>
> +/* QDSP6v62 parameters */
> +#define QDSP6SS_BHS_EN_REST_ACK BIT(0)
> +#define BHS_CHECK_MAX_LOOPS 200
> +#define QDSP6SS_BHS_STATUS 0x0C4
> +
> /* QDSP6v65 parameters */
> #define QDSP6SS_SLEEP 0x3C
> #define QDSP6SS_BOOT_CORE_START 0x400
> @@ -505,8 +510,9 @@ static int q6v5proc_reset(struct q6v5 *qproc)
> int mem_pwr_ctl;
>
> /* Override the ACC value if required */
> - writel(QDSP6SS_ACC_OVERRIDE_VAL,
> - qproc->reg_base + QDSP6SS_STRAP_ACC);
> + if (qproc->version == MSS_MSM8996)
> + writel(QDSP6SS_ACC_OVERRIDE_VAL,
> + qproc->reg_base + QDSP6SS_STRAP_ACC);
>
> /* Assert resets, stop core */
> val = readl(qproc->reg_base + QDSP6SS_RESET_REG);
> @@ -534,6 +540,18 @@ static int q6v5proc_reset(struct q6v5 *qproc)
> val |= readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
> udelay(1);
>
> + /* wait for BHS_EN_REST_ACK to be set */
> + if (qproc->version == MSS_MSM8998) {
> + ret = readl_poll_timeout(qproc->reg_base + QDSP6SS_BHS_STATUS,
> + val, (val & QDSP6SS_BHS_EN_REST_ACK),
> + 1, BHS_CHECK_MAX_LOOPS);
> + if (ret) {
> + dev_err(qproc->dev,
> + "QDSP6SS_BHS_EN_REST_ACK timedout\n");
> + return -ETIMEDOUT;
> + }
> + }
> +
> /* Put LDO in bypass mode */
> val |= QDSP6v56_LDO_BYP;
> writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
> @@ -1594,7 +1612,6 @@ static const struct rproc_hexagon_res msm8998_mss = {
> .active_clk_names = (char*[]){
> "iface",
> "bus",
> - "mem",
> "gpll0_mss",
> "mnoc_axi",
> "snoc_axi",
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>