Re: [EXT] Re: [PATCH net v2] net: fec: add a check for CONFIG_PM to avoid clock count mis-match

From: Chuhong Yuan
Date: Sat Nov 16 2019 - 09:00:45 EST


On Sat, Nov 16, 2019 at 2:57 PM Andy Duan <fugang.duan@xxxxxxx> wrote:
>
> From: David Miller <davem@xxxxxxxxxxxxx> Sent: Saturday, November 16, 2019 4:11 AM
> > From: Chuhong Yuan <hslester96@xxxxxxxxx>
> > Date: Tue, 12 Nov 2019 19:28:30 +0800
> >
> > > If CONFIG_PM is enabled, runtime pm will work and call runtime_suspend
> > > automatically to disable clks.
> > > Therefore, remove only needs to disable clks when CONFIG_PM is disabled.
> > > Add this check to avoid clock count mis-match caused by double-disable.
> > >
> > > Fixes: c43eab3eddb4 ("net: fec: add missed clk_disable_unprepare in
> > > remove")
> > > Signed-off-by: Chuhong Yuan <hslester96@xxxxxxxxx>
> >
> > Your explanation in your reply to my feedback still doesn't explain the
> > situation to me.
> >
> > For every clock enable done during probe, there must be a matching clock
> > disable during remove.
> >
> > Period.
> >
> > There is no CONFIG_PM guarding the clock enables during probe in this driver,
> > therefore there should be no reason to require CONFIG_PM guards to the
> > clock disables during the remove method,
> >
> > You have to explain clearly, and in detail, why my logic and analysis of this
> > situation is not correct.
> >
> > And when you do so, you will need to add those important details to the
> > commit message of this change and submit a v3.
> >
> > Thank you.
>
> I agree with David. Below fixes is more reasonable.
> Chuhong, if there has no voice about below fixes, you can submit v3 later.
>

I get confused that how does this work to solve the CONFIG_PM problem.
And why do we need to adjust the position of the latter four functions?
I need to explain them in the commit message.

> @@ -3636,6 +3636,11 @@ fec_drv_remove(struct platform_device *pdev)
> struct net_device *ndev = platform_get_drvdata(pdev);
> struct fec_enet_private *fep = netdev_priv(ndev);
> struct device_node *np = pdev->dev.of_node;
> + int ret;
> +
> + ret = pm_runtime_get_sync(&pdev->dev);
> + if (ret < 0)
> + return ret;
>
> cancel_work_sync(&fep->tx_timeout_work);
> fec_ptp_stop(pdev);
> @@ -3643,15 +3648,17 @@ fec_drv_remove(struct platform_device *pdev)
> fec_enet_mii_remove(fep);
> if (fep->reg_phy)
> regulator_disable(fep->reg_phy);
> - pm_runtime_put(&pdev->dev);
> - pm_runtime_disable(&pdev->dev);
> - clk_disable_unprepare(fep->clk_ahb);
> - clk_disable_unprepare(fep->clk_ipg);
> +
> if (of_phy_is_fixed_link(np))
> of_phy_deregister_fixed_link(np);
> of_node_put(fep->phy_node);
> free_netdev(ndev);
>
> + clk_disable_unprepare(fep->clk_ahb);
> + clk_disable_unprepare(fep->clk_ipg);
> + pm_runtime_put_noidle(&pdev->dev);
> + pm_runtime_disable(&pdev->dev);
> +
> return 0;
> }
>
> Regards,
> Fugang Duan