Re: [PATCH v7 06/19] PM / devfreq: tegra30: Use kHz units uniformly in the code

[Chanwoo Choi]

On 19. 10. 30. ìì 7:00, Dmitry Osipenko wrote:
> Part of the code uses Hz units and the other kHz, let's switch to kHz
> everywhere for consistency. A small benefit from this change (besides
> code's cleanup) is that now powertop utility correctly displays devfreq's
> stats, for some reason it expects them to be in kHz.
> 
> Tested-by: Peter Geis <pgwipeout@xxxxxxxxx>
> Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx>
> ---
>  drivers/devfreq/tegra30-devfreq.c | 11 ++++++-----
>  1 file changed, 6 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/devfreq/tegra30-devfreq.c b/drivers/devfreq/tegra30-devfreq.c
> index 1d22f5239cd5..06c5376a7201 100644
> --- a/drivers/devfreq/tegra30-devfreq.c
> +++ b/drivers/devfreq/tegra30-devfreq.c
> @@ -448,7 +448,7 @@ static int tegra_devfreq_target(struct device *dev, unsigned long *freq,
>  	rate = dev_pm_opp_get_freq(opp);
>  	dev_pm_opp_put(opp);
>  
> -	err = clk_set_min_rate(tegra->emc_clock, rate);
> +	err = clk_set_min_rate(tegra->emc_clock, rate * KHZ);
>  	if (err)
>  		return err;
>  
> @@ -477,7 +477,7 @@ static int tegra_devfreq_get_dev_status(struct device *dev,
>  	stat->private_data = tegra;
>  
>  	/* The below are to be used by the other governors */
> -	stat->current_frequency = cur_freq * KHZ;
> +	stat->current_frequency = cur_freq;
>  
>  	actmon_dev = &tegra->devices[MCALL];
>  
> @@ -527,7 +527,7 @@ static int tegra_governor_get_target(struct devfreq *devfreq,
>  		target_freq = max(target_freq, dev->target_freq);
>  	}
>  
> -	*freq = target_freq * KHZ;
> +	*freq = target_freq;
>  
>  	return 0;
>  }
> @@ -663,7 +663,7 @@ static int tegra_devfreq_probe(struct platform_device *pdev)
>  			goto remove_opps;
>  		}
>  
> -		err = dev_pm_opp_add(&pdev->dev, rate, 0);
> +		err = dev_pm_opp_add(&pdev->dev, rate / KHZ, 0);
>  		if (err) {
>  			dev_err(&pdev->dev, "Failed to add OPP: %d\n", err);
>  			goto remove_opps;
> @@ -686,7 +686,8 @@ static int tegra_devfreq_probe(struct platform_device *pdev)
>  		goto unreg_notifier;
>  	}
>  
> -	tegra_devfreq_profile.initial_freq = clk_get_rate(tegra->emc_clock);
> +	tegra_devfreq_profile.initial_freq = tegra->cur_freq;
> +
>  	devfreq = devfreq_add_device(&pdev->dev, &tegra_devfreq_profile,
>  				     "tegra_actmon", NULL);
>  	if (IS_ERR(devfreq)) {
> 

Reviewed-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>

-- 
Best Regards,
Chanwoo Choi
Samsung Electronics