Re: [PATCH v2 07/23] soc: fsl: qe: merge qe_ic.h into qe_ic.c
From: Christophe Leroy
Date: Wed Oct 30 2019 - 06:24:15 EST
Le 25/10/2019 Ã 14:40, Rasmus Villemoes a ÃcritÂ:
The local qe_ic.h header is only used by qe_ic.c, so merge its
contents into the .c file. This is preparation for moving the driver
to drivers/irqchip/. It also avoids confusion between this header and
the one at include/soc/fsl/qe/qe_ic.h, which is included from a number
of places (qe_ic.c among others).
Signed-off-by: Rasmus Villemoes <linux@xxxxxxxxxxxxxxxxxx>
---
drivers/soc/fsl/qe/qe_ic.c | 91 ++++++++++++++++++++++++++++++-
drivers/soc/fsl/qe/qe_ic.h | 108 -------------------------------------
2 files changed, 90 insertions(+), 109 deletions(-)
delete mode 100644 drivers/soc/fsl/qe/qe_ic.h
diff --git a/drivers/soc/fsl/qe/qe_ic.c b/drivers/soc/fsl/qe/qe_ic.c
index d420492b4c23..7b1870d2866a 100644
--- a/drivers/soc/fsl/qe/qe_ic.c
+++ b/drivers/soc/fsl/qe/qe_ic.c
@@ -26,7 +26,96 @@
#include <asm/io.h>
#include <soc/fsl/qe/qe_ic.h>
-#include "qe_ic.h"
+#define NR_QE_IC_INTS 64
+
+/* QE IC registers offset */
+#define QEIC_CICR 0x00
+#define QEIC_CIVEC 0x04
+#define QEIC_CRIPNR 0x08
+#define QEIC_CIPNR 0x0c
+#define QEIC_CIPXCC 0x10
+#define QEIC_CIPYCC 0x14
+#define QEIC_CIPWCC 0x18
+#define QEIC_CIPZCC 0x1c
+#define QEIC_CIMR 0x20
+#define QEIC_CRIMR 0x24
+#define QEIC_CICNR 0x28
+#define QEIC_CIPRTA 0x30
+#define QEIC_CIPRTB 0x34
+#define QEIC_CRICR 0x3c
+#define QEIC_CHIVEC 0x60
+
+/* Interrupt priority registers */
+#define CIPCC_SHIFT_PRI0 29
+#define CIPCC_SHIFT_PRI1 26
+#define CIPCC_SHIFT_PRI2 23
+#define CIPCC_SHIFT_PRI3 20
+#define CIPCC_SHIFT_PRI4 13
+#define CIPCC_SHIFT_PRI5 10
+#define CIPCC_SHIFT_PRI6 7
+#define CIPCC_SHIFT_PRI7 4
I think you should drop all unused consts and only keep the ones that
are used.
+
+/* CICR priority modes */
+#define CICR_GWCC 0x00040000
+#define CICR_GXCC 0x00020000
+#define CICR_GYCC 0x00010000
+#define CICR_GZCC 0x00080000
+#define CICR_GRTA 0x00200000
+#define CICR_GRTB 0x00400000
+#define CICR_HPIT_SHIFT 8
+#define CICR_HPIT_MASK 0x00000300
+#define CICR_HP_SHIFT 24
+#define CICR_HP_MASK 0x3f000000
+
+/* CICNR */
+#define CICNR_WCC1T_SHIFT 20
+#define CICNR_ZCC1T_SHIFT 28
+#define CICNR_YCC1T_SHIFT 12
+#define CICNR_XCC1T_SHIFT 4
Same here
+
+/* CRICR */
+#define CRICR_RTA1T_SHIFT 20
+#define CRICR_RTB1T_SHIFT 28
Same
+
+/* Signal indicator */
+#define SIGNAL_MASK 3
+#define SIGNAL_HIGH 2
+#define SIGNAL_LOW 0
Only SIGNAL_HIGH seems to be used.
Christophe
+
+struct qe_ic {
+ /* Control registers offset */
+ u32 __iomem *regs;
+
+ /* The remapper for this QEIC */
+ struct irq_domain *irqhost;
+
+ /* The "linux" controller struct */
+ struct irq_chip hc_irq;
+
+ /* VIRQ numbers of QE high/low irqs */
+ unsigned int virq_high;
+ unsigned int virq_low;
+};
+
+/*
+ * QE interrupt controller internal structure
+ */
+struct qe_ic_info {
+ /* Location of this source at the QIMR register */
+ u32 mask;
+
+ /* Mask register offset */
+ u32 mask_reg;
+
+ /*
+ * For grouped interrupts sources - the interrupt code as
+ * appears at the group priority register
+ */
+ u8 pri_code;
+
+ /* Group priority register offset */
+ u32 pri_reg;
+};
static DEFINE_RAW_SPINLOCK(qe_ic_lock);
diff --git a/drivers/soc/fsl/qe/qe_ic.h b/drivers/soc/fsl/qe/qe_ic.h
deleted file mode 100644
index 29b4d768e4a8..000000000000
--- a/drivers/soc/fsl/qe/qe_ic.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * drivers/soc/fsl/qe/qe_ic.h
- *
- * QUICC ENGINE Interrupt Controller Header
- *
- * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
- *
- * Author: Li Yang <leoli@xxxxxxxxxxxxx>
- * Based on code from Shlomi Gridish <gridish@xxxxxxxxxxxxx>
- */
-#ifndef _POWERPC_SYSDEV_QE_IC_H
-#define _POWERPC_SYSDEV_QE_IC_H
-
-#include <soc/fsl/qe/qe_ic.h>
-
-#define NR_QE_IC_INTS 64
-
-/* QE IC registers offset */
-#define QEIC_CICR 0x00
-#define QEIC_CIVEC 0x04
-#define QEIC_CRIPNR 0x08
-#define QEIC_CIPNR 0x0c
-#define QEIC_CIPXCC 0x10
-#define QEIC_CIPYCC 0x14
-#define QEIC_CIPWCC 0x18
-#define QEIC_CIPZCC 0x1c
-#define QEIC_CIMR 0x20
-#define QEIC_CRIMR 0x24
-#define QEIC_CICNR 0x28
-#define QEIC_CIPRTA 0x30
-#define QEIC_CIPRTB 0x34
-#define QEIC_CRICR 0x3c
-#define QEIC_CHIVEC 0x60
-
-/* Interrupt priority registers */
-#define CIPCC_SHIFT_PRI0 29
-#define CIPCC_SHIFT_PRI1 26
-#define CIPCC_SHIFT_PRI2 23
-#define CIPCC_SHIFT_PRI3 20
-#define CIPCC_SHIFT_PRI4 13
-#define CIPCC_SHIFT_PRI5 10
-#define CIPCC_SHIFT_PRI6 7
-#define CIPCC_SHIFT_PRI7 4
-
-/* CICR priority modes */
-#define CICR_GWCC 0x00040000
-#define CICR_GXCC 0x00020000
-#define CICR_GYCC 0x00010000
-#define CICR_GZCC 0x00080000
-#define CICR_GRTA 0x00200000
-#define CICR_GRTB 0x00400000
-#define CICR_HPIT_SHIFT 8
-#define CICR_HPIT_MASK 0x00000300
-#define CICR_HP_SHIFT 24
-#define CICR_HP_MASK 0x3f000000
-
-/* CICNR */
-#define CICNR_WCC1T_SHIFT 20
-#define CICNR_ZCC1T_SHIFT 28
-#define CICNR_YCC1T_SHIFT 12
-#define CICNR_XCC1T_SHIFT 4
-
-/* CRICR */
-#define CRICR_RTA1T_SHIFT 20
-#define CRICR_RTB1T_SHIFT 28
-
-/* Signal indicator */
-#define SIGNAL_MASK 3
-#define SIGNAL_HIGH 2
-#define SIGNAL_LOW 0
-
-struct qe_ic {
- /* Control registers offset */
- u32 __iomem *regs;
-
- /* The remapper for this QEIC */
- struct irq_domain *irqhost;
-
- /* The "linux" controller struct */
- struct irq_chip hc_irq;
-
- /* VIRQ numbers of QE high/low irqs */
- unsigned int virq_high;
- unsigned int virq_low;
-};
-
-/*
- * QE interrupt controller internal structure
- */
-struct qe_ic_info {
- /* Location of this source at the QIMR register */
- u32 mask;
-
- /* Mask register offset */
- u32 mask_reg;
-
- /*
- * For grouped interrupts sources - the interrupt code as
- * appears at the group priority register
- */
- u8 pri_code;
-
- /* Group priority register offset */
- u32 pri_reg;
-};
-
-#endif /* _POWERPC_SYSDEV_QE_IC_H */