[PATCH v2 0/4] Add support for Thor96 board

[Manivannan Sadhasivam]

Hello,

This patchset adds support for Thor96 board from Einfochips. This board is
one of the 96Boards Consumer Edition platform powered by the NXP i.MX8MQ
SoC.

Following are the features supported currently:

1. uSD
2. WiFi/BT
3. Ethernet
4. EEPROM (M24256)
5. NOR Flash (W25Q256JW)
6. 2xUSB3.0 ports and 1xUSB2.0 port at HS expansion

More information about this board can be found in Arrow website:
https://www.arrow.com/en/products/i.imx8-thor96/arrow-development-tools

Link to 96Boards CE Specification: https://linaro.co/ce-specification

Expecting patch 1 to go through LED/Rob's tree, 4 through MTD tree
and 2,3 through Freescale tree.

Thanks,
Mani

Changes in v2:

* Added patch for documenting commonly used LED triggers
* Added Reviewed-by tags for bindings patch
* Changed, fsl,uart-has-rtscts to uart-has-rtscts in dts
* Modified the commit message of MTD patch

Manivannan Sadhasivam (4):
  dt-bindings: leds: Document commonly used LED triggers
  dt-bindings: arm: Add devicetree binding for Thor96 Board
  arm64: dts: freescale: Add devicetree support for Thor96 board
  mtd: spi-nor: Add support for w25q256jw

 .../devicetree/bindings/arm/fsl.yaml          |   1 +
 .../devicetree/bindings/leds/common.txt       |  17 +
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../boot/dts/freescale/imx8mq-thor96.dts      | 581 ++++++++++++++++++
 drivers/mtd/spi-nor/spi-nor.c                 |   2 +
 5 files changed, 602 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-thor96.dts

-- 
2.17.1