Re: [PATCH v13 10/18] ARM: dts: imx6dl-yapp4: Add reg property to the lp5562 channel node

[Shawn Guo]

On Wed, Oct 16, 2019 at 10:59:46AM -0500, Dan Murphy wrote:
> Add the reg property to each channel node.  This update is
> to accomodate the multicolor framework.  In addition to the
> accomodation this allows the LEDs to be placed on any channel
> and allow designs to skip channels as opposed to requiring
> sequential order.
> 
> Signed-off-by: Dan Murphy <dmurphy@xxxxxx>
> CC: Shawn Guo <shawnguo@xxxxxxxxxx>
> CC: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
> CC: Pengutronix Kernel Team <kernel@xxxxxxxxxxxxxx>
> CC: Fabio Estevam <festevam@xxxxxxxxx>
> CC: NXP Linux Team <linux-imx@xxxxxxx>
> ---
>  arch/arm/boot/dts/imx6dl-yapp4-common.dtsi | 14 ++++++++++----
>  1 file changed, 10 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
> index e8d800fec637..efc466ed1fea 100644
> --- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
> +++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
> @@ -257,29 +257,35 @@
>  		reg = <0x30>;
>  		clock-mode = /bits/ 8 <1>;
>  		status = "disabled";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
>  
> -		chan0 {
> +		chan@0 {

Patch #18 updates bindings example to use led as node name.  Maybe we
should do the same here?

Shawn

>  			chan-name = "R";
>  			led-cur = /bits/ 8 <0x20>;
>  			max-cur = /bits/ 8 <0x60>;
> +			reg = <0>;
>  		};
>  
> -		chan1 {
> +		chan@1 {
>  			chan-name = "G";
>  			led-cur = /bits/ 8 <0x20>;
>  			max-cur = /bits/ 8 <0x60>;
> +			reg = <1>;
>  		};
>  
> -		chan2 {
> +		chan@2 {
>  			chan-name = "B";
>  			led-cur = /bits/ 8 <0x20>;
>  			max-cur = /bits/ 8 <0x60>;
> +			reg = <2>;
>  		};
>  
> -		chan3 {
> +		chan@3 {
>  			chan-name = "W";
>  			led-cur = /bits/ 8 <0x0>;
>  			max-cur = /bits/ 8 <0x0>;
> +			reg = <3>;
>  		};
>  	};
>  
> -- 
> 2.22.0.214.g8dca754b1e
>