Re: [PATCH v4 0/2] gpio: brcm: XGS iProc GPIO driver

[Scott Branden]

Patch Series looks ok.

On 2019-10-24 1:27 p.m., Chris Packham wrote:
> This is ported this from Broadcom's XLDK (now heavily modified). There seem to
> be 3 different IP blocks for 3 separate banks of GPIOs in the iProc chips.
>
> I've dropped everything except support for the Chip Common A GPIO
> controller because the other blocks actually seem to be supportable with
> other drivers. The driver itself is halfway between pinctrl-nsp-gpio.c
> and pinctrl-iproc-gpio.c.
>
> Chris Packham (2):
>    dt-bindings: gpio: brcm: Add bindings for xgs-iproc
>    gpio: Add xgs-iproc driver
Acked-by: Scott Branden <scott.branden@xxxxxxxxxxxx>
>   .../bindings/gpio/brcm,xgs-iproc-gpio.yaml    |  70 ++++
>   drivers/gpio/Kconfig                          |   9 +
>   drivers/gpio/Makefile                         |   1 +
>   drivers/gpio/gpio-xgs-iproc.c                 | 321 ++++++++++++++++++
>   4 files changed, 401 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml
>   create mode 100644 drivers/gpio/gpio-xgs-iproc.c