[PATCH 0/3] Add support for Thor96 board

[Manivannan Sadhasivam]

Hello,

This patchset adds support for Thor96 board from Einfochips. This board is
one of the 96Boards Consumer Edition platform powered by the NXP i.MX8MQ
SoC.

Following are the features supported currently:

1. uSD
2. WiFi/BT
3. Ethernet
4. EEPROM (M24256)
5. NOR Flash (W25Q256JW)
6. 2xUSB3.0 ports and 1xUSB2.0 port at HS expansion

More information about this board can be found in Arrow website:
https://www.arrow.com/en/products/i.imx8-thor96/arrow-development-tools

Link to 96Boards CE Specification: https://linaro.co/ce-specification

Expecting patch 3 to go through MTD tree and 1,2 to go through freescale
tree.

Thanks,
Mani

Manivannan Sadhasivam (3):
  dt-bindings: arm: Add devicetree binding for Thor96 Board
  arm64: dts: freescale: Add devicetree support for Thor96 board
  mtd: spi-nor: Add support for w25q256jw

 .../devicetree/bindings/arm/fsl.yaml          |   1 +
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../boot/dts/freescale/imx8mq-thor96.dts      | 581 ++++++++++++++++++
 drivers/mtd/spi-nor/spi-nor.c                 |   2 +
 4 files changed, 585 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-thor96.dts

-- 
2.17.1