Re: [PATCH] Bluetooth: hci_qca: Add delay for wcn3990 stability

[Matthias Kaehlcke]

On Thu, Oct 17, 2019 at 02:29:55PM -0700, Jeffrey Hugo wrote:
> On the msm8998 mtp, the response to the baudrate change command is never
> received.  On the Lenovo Miix 630, the response to the baudrate change
> command is corrupted - "Frame reassembly failed (-84)".
> 
> Adding a 50ms delay before re-enabling flow to receive the baudrate change
> command response from the wcn3990 addesses both issues, and allows
> bluetooth to become functional.

>From my earlier debugging on sdm845 I don't think this is what happens.
The problem is that the wcn3990 sends the response to the baudrate change
command using the new baudrate, while the UART on the SoC still operates
with the prior speed (for details see 2faa3f15fa2f ("Bluetooth: hci_qca:
wcn3990: Drop baudrate change vendor event"))

IIRC the 50ms delay causes the HCI core to discard the received data,
which is why the "Frame reassembly failed" message disappears, not
because the response was received. In theory commit 78e8fa2972e5
("Bluetooth: hci_qca: Deassert RTS while baudrate change command")
should have fixed those messages, do you know if CTS/RTS are connected
on the Bluetooth UART of the Lenovo Miix 630?