Re: [PATCH v3 1/6] dt-bindings: mfd: max77650: convert the binding document to yaml
From: Bartosz Golaszewski
Date: Fri Oct 18 2019 - 02:44:23 EST
czw., 17 paÅ 2019 o 20:31 Rob Herring <robh@xxxxxxxxxx> napisaÅ(a):
>
> On Thu, Oct 17, 2019 at 09:12:29AM +0200, Bartosz Golaszewski wrote:
> > From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
> >
> > Convert the binding document for MAX77650 core MFD module to YAML.
> >
> > Signed-off-by: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
> > ---
> > .../devicetree/bindings/mfd/max77650.txt | 46 ------
> > .../devicetree/bindings/mfd/max77650.yaml | 151 ++++++++++++++++++
> > 2 files changed, 151 insertions(+), 46 deletions(-)
> > delete mode 100644 Documentation/devicetree/bindings/mfd/max77650.txt
> > create mode 100644 Documentation/devicetree/bindings/mfd/max77650.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/mfd/max77650.txt b/Documentation/devicetree/bindings/mfd/max77650.txt
> > deleted file mode 100644
> > index b529d8d19335..000000000000
> > --- a/Documentation/devicetree/bindings/mfd/max77650.txt
> > +++ /dev/null
> > @@ -1,46 +0,0 @@
> > -MAX77650 ultra low-power PMIC from Maxim Integrated.
> > -
> > -Required properties:
> > --------------------
> > -- compatible: Must be "maxim,max77650"
> > -- reg: I2C device address.
> > -- interrupts: The interrupt on the parent the controller is
> > - connected to.
> > -- interrupt-controller: Marks the device node as an interrupt controller.
> > -- #interrupt-cells: Must be <2>.
> > -
> > -- gpio-controller: Marks the device node as a gpio controller.
> > -- #gpio-cells: Must be <2>. The first cell is the pin number and
> > - the second cell is used to specify the gpio active
> > - state.
> > -
> > -Optional properties:
> > ---------------------
> > -gpio-line-names: Single string containing the name of the GPIO line.
> > -
> > -The GPIO-controller module is represented as part of the top-level PMIC
> > -node. The device exposes a single GPIO line.
> > -
> > -For device-tree bindings of other sub-modules (regulator, power supply,
> > -LEDs and onkey) refer to the binding documents under the respective
> > -sub-system directories.
> > -
> > -For more details on GPIO bindings, please refer to the generic GPIO DT
> > -binding document <devicetree/bindings/gpio/gpio.txt>.
> > -
> > -Example:
> > ---------
> > -
> > - pmic@48 {
> > - compatible = "maxim,max77650";
> > - reg = <0x48>;
> > -
> > - interrupt-controller;
> > - interrupt-parent = <&gpio2>;
> > - #interrupt-cells = <2>;
> > - interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
> > -
> > - gpio-controller;
> > - #gpio-cells = <2>;
> > - gpio-line-names = "max77650-charger";
> > - };
> > diff --git a/Documentation/devicetree/bindings/mfd/max77650.yaml b/Documentation/devicetree/bindings/mfd/max77650.yaml
> > new file mode 100644
> > index 000000000000..66a447e1cf56
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/mfd/max77650.yaml
> > @@ -0,0 +1,151 @@
> > +# SPDX-License-Identifier: GPL-2.0
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/mfd/max77650.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: MAX77650 ultra low-power PMIC from Maxim Integrated.
> > +
> > +maintainers:
> > + - Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
> > +
> > +description: |
> > + This document describes the DT properties of the core MFD controller.
>
> So does every file in this directory.
>
> Describe what this chip is.
>
> > +
> > + The GPIO-controller module is represented as part of the top-level PMIC
> > + node. The device exposes a single GPIO line.
> > +
> > + For device-tree bindings of other sub-modules (regulator, power supply,
> > + LEDs and onkey) refer to the binding documents under the respective
> > + sub-system directories.
> > +
> > + For more details on GPIO bindings, please refer to the generic GPIO DT
> > + binding document <devicetree/bindings/gpio/gpio.txt>.
>
> Also fairly useless and another reference to maintain...
>
> > +
> > +properties:
> > + compatible:
> > + const: maxim,max77650
> > +
> > + reg:
> > + description:
> > + I2C device address.
> > + maxItems: 1
> > +
> > + interrupts:
> > + maxItems: 1
> > +
> > + interrupt-controller: true
> > +
> > + "#interrupt-cells":
> > + const: 2
> > + description:
> > + The first cell is the IRQ number, the second cell is the trigger type.
> > +
> > + gpio-controller: true
> > +
> > + "#gpio-cells":
> > + const: 2
> > + description:
> > + The first cell is the pin number and the second cell is used to specify
> > + the gpio active state.
> > +
> > + gpio-line-names:
> > + maxItems: 1
> > + description:
> > + Single string containing the name of the GPIO line.
> > +
> > + regulators:
> > + $ref: ../regulator/max77650-regulator.yaml
>
> Not bisectable... This patch needs to come last.
>
> > +
> > + charger:
> > + $ref: ../power/supply/max77650-charger.yaml
> > +
> > + leds:
> > + $ref: ../leds/leds-max77650.yaml
> > +
> > + onkey:
> > + $ref: ../input/max77650-onkey.yaml
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - interrupts
> > + - interrupt-controller
> > + - "#interrupt-cells"
> > + - gpio-controller
> > + - "#gpio-cells"
>
> None of the child nodes are required?
>
Technically no, and now when I think about it, neither are the
following two properties really:
- gpio-controller
- "#gpio-cells"
You can define an empty device, it's just going to be useless. For
practical purposes you can use any combination of modules, so I
wouldn't make any of them required.
Bart
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/interrupt-controller/irq.h>
> > + #include <dt-bindings/input/linux-event-codes.h>
> > + i2c {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + pmic@48 {
> > + compatible = "maxim,max77650";
> > + reg = <0x48>;
> > +
> > + interrupt-controller;
> > + interrupt-parent = <&gpio2>;
> > + #interrupt-cells = <2>;
> > + interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
> > +
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > + gpio-line-names = "max77650-charger";
> > +
> > + regulators {
> > + compatible = "maxim,max77650-regulator";
> > +
> > + max77650_ldo: regulator@0 {
> > + regulator-compatible = "ldo";
> > + regulator-name = "max77650-ldo";
> > + regulator-min-microvolt = <1350000>;
> > + regulator-max-microvolt = <2937500>;
> > + };
> > +
> > + max77650_sbb0: regulator@1 {
> > + regulator-compatible = "sbb0";
> > + regulator-name = "max77650-sbb0";
> > + regulator-min-microvolt = <800000>;
> > + regulator-max-microvolt = <1587500>;
> > + };
> > + };
> > +
> > + charger {
> > + compatible = "maxim,max77650-charger";
> > + input-voltage-min-microvolt = <4200000>;
> > + input-current-limit-microamp = <285000>;
> > + };
> > +
> > + leds {
> > + compatible = "maxim,max77650-led";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + led@0 {
> > + reg = <0>;
> > + label = "blue:usr0";
> > + };
> > +
> > + led@1 {
> > + reg = <1>;
> > + label = "red:usr1";
> > + linux,default-trigger = "heartbeat";
> > + };
> > +
> > + led@2 {
> > + reg = <2>;
> > + label = "green:usr2";
> > + };
> > + };
> > +
> > + onkey {
> > + compatible = "maxim,max77650-onkey";
> > + linux,code = <KEY_END>;
> > + maxim,onkey-slide;
> > + };
> > + };
> > + };
> > --
> > 2.23.0
> >