Re: [PATCH V2 3/3] bnxt_en: Add support to collect crash dump via ethtool

[Vasundhara Volam]

On Fri, Oct 18, 2019 at 12:52 AM Jakub Kicinski
<jakub.kicinski@xxxxxxxxxxxxx> wrote:
>
> On Thu, 17 Oct 2019 17:31:22 +0530, Sheetal Tigadoli wrote:
> > From: Vasundhara Volam <vasundhara-v.volam@xxxxxxxxxxxx>
> >
> > Driver supports 2 types of core dumps.
> >
> > 1. Live dump - Firmware dump when system is up and running.
> > 2. Crash dump - Dump which is collected during firmware crash
> >                 that can be retrieved after recovery.
> > Crash dump is currently supported only on specific 58800 chips
> > which can be retrieved using OP-TEE API only, as firmware cannot
> > access this region directly.
> >
> > User needs to set the dump flag using following command before
> > initiating the dump collection:
> >
> >     $ ethtool -W|--set-dump eth0 N
> >
> > Where N is "0" for live dump and "1" for crash dump
> >
> > Command to collect the dump after setting the flag:
> >
> >     $ ethtool -w eth0 data Filename
> >
> > Cc: Michael Chan <michael.chan@xxxxxxxxxxxx>
> > Signed-off-by: Vasundhara Volam <vasundhara-v.volam@xxxxxxxxxxxx>
> > Signed-off-by: Sheetal Tigadoli <sheetal.tigadoli@xxxxxxxxxxxx>
> > ---
> >  drivers/net/ethernet/broadcom/bnxt/bnxt.h         |  3 ++
> >  drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 36 +++++++++++++++++++++--
> >  drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.h |  2 ++
> >  3 files changed, 39 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
> > index 0943715..3e7d1fb 100644
> > --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h
> > +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
> > @@ -1807,6 +1807,9 @@ struct bnxt {
> >
> >       u8                      num_leds;
> >       struct bnxt_led_info    leds[BNXT_MAX_LED];
> > +     u16                     dump_flag;
> > +#define BNXT_DUMP_LIVE               0
> > +#define BNXT_DUMP_CRASH              1
> >
> >       struct bpf_prog         *xdp_prog;
> >
> > diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
> > index 51c1404..1596221 100644
> > --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
> > +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
> > @@ -3311,6 +3311,23 @@ static int bnxt_get_coredump(struct bnxt *bp, void *buf, u32 *dump_len)
> >       return rc;
> >  }
> >
> > +static int bnxt_set_dump(struct net_device *dev, struct ethtool_dump *dump)
> > +{
> > +     struct bnxt *bp = netdev_priv(dev);
> > +
> > +#ifndef CONFIG_TEE_BNXT_FW
> > +     return -EOPNOTSUPP;
> > +#endif
>
>         if (!IS_ENABLED(...))
>                 return x;
>
> reads better IMHO
Okay.

>
> But also you seem to be breaking live dump for systems with
> CONFIG_TEE_BNXT_FW=n
Yes, we are supporting set_dump only if crash dump is supported.

>
> > +     if (dump->flag > BNXT_DUMP_CRASH) {
> > +             netdev_err(dev, "Supports only Live(0) and Crash(1) dumps.\n");
>
> more of an _info than _err, if at all
I made this err, as we are returning error on invalid flag value. I
can modify the log to
something like "Invalid dump flag. Supports only Live(0) and Crash(1)
dumps.\n" to make
it more like error log.

>
> > +             return -EINVAL;
> > +     }
> > +
> > +     bp->dump_flag = dump->flag;
> > +     return 0;
> > +}
> > +
> >  static int bnxt_get_dump_flag(struct net_device *dev, struct ethtool_dump *dump)
> >  {
> >       struct bnxt *bp = netdev_priv(dev);
> > @@ -3323,7 +3340,12 @@ static int bnxt_get_dump_flag(struct net_device *dev, struct ethtool_dump *dump)
> >                       bp->ver_resp.hwrm_fw_bld_8b << 8 |
> >                       bp->ver_resp.hwrm_fw_rsvd_8b;
> >
> > -     return bnxt_get_coredump(bp, NULL, &dump->len);
> > +     dump->flag = bp->dump_flag;
> > +     if (bp->dump_flag == BNXT_DUMP_CRASH)
> > +             dump->len = BNXT_CRASH_DUMP_LEN;
> > +     else
> > +             bnxt_get_coredump(bp, NULL, &dump->len);
> > +     return 0;
> >  }
> >
> >  static int bnxt_get_dump_data(struct net_device *dev, struct ethtool_dump *dump,
> > @@ -3336,7 +3358,16 @@ static int bnxt_get_dump_data(struct net_device *dev, struct ethtool_dump *dump,
> >
> >       memset(buf, 0, dump->len);
> >
> > -     return bnxt_get_coredump(bp, buf, &dump->len);
> > +     dump->flag = bp->dump_flag;
> > +     if (dump->flag == BNXT_DUMP_CRASH) {
> > +#ifdef CONFIG_TEE_BNXT_FW
> > +             return tee_bnxt_copy_coredump(buf, 0, dump->len);
> > +#endif
> > +     } else {
> > +             return bnxt_get_coredump(bp, buf, &dump->len);
> > +     }
> > +
> > +     return 0;
> >  }
> >
> >  void bnxt_ethtool_init(struct bnxt *bp)
> > @@ -3446,6 +3477,7 @@ void bnxt_ethtool_free(struct bnxt *bp)
> >       .set_phys_id            = bnxt_set_phys_id,
> >       .self_test              = bnxt_self_test,
> >       .reset                  = bnxt_reset,
> > +     .set_dump               = bnxt_set_dump,
> >       .get_dump_flag          = bnxt_get_dump_flag,
> >       .get_dump_data          = bnxt_get_dump_data,
> >  };
> > diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.h b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.h
> > index b5b65b3..01de7e7 100644
> > --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.h
> > +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.h
> > @@ -59,6 +59,8 @@ struct hwrm_dbg_cmn_output {
> >       #define HWRM_DBG_CMN_FLAGS_MORE 1
> >  };
> >
> > +#define BNXT_CRASH_DUMP_LEN  (8 << 20)
> > +
> >  #define BNXT_LED_DFLT_ENA                            \
> >       (PORT_LED_CFG_REQ_ENABLES_LED0_ID |             \
> >        PORT_LED_CFG_REQ_ENABLES_LED0_STATE |          \
>
Thanks,
Vasundhara